Toyota MR2 Message Board - View Single Post - product reveiw-ssautochrome manifold

jlantz85 · 05-12-2006, 01:18 AM

i bought the ssa 3sgte manifold for my 5sfte project. the welds look good, and both flanges have a straight edge(not warped). there is one problem with mine though, one of the holes where the studs go through is off by about 1/8th inch. im going to drill it out and itll be alright, but i didnt see any reveiws for this and just thought id add one for people interested in this.

05-12-2006, 01:18 AM	#1 (permalink)
jlantz85 diesel skills Join Date: Feb 2006 Location: Clayton, Indiana Posts: 225 Thanks: 0 Thanked 6 Times in 6 Posts My Google Map iTrader Rating: (0/0% )	product reveiw-ssautochrome manifold i bought the ssa 3sgte manifold for my 5sfte project. the welds look good, and both flanges have a straight edge(not warped). there is one problem with mine though, one of the holes where the studs go through is off by about 1/8th inch. im going to drill it out and itll be alright, but i didnt see any reveiws for this and just thought id add one for people interested in this.