Toyota MR2 Message Board - View Single Post - My experience with removing ball joints (MKII)

arber0214 · 06-17-2006, 08:55 PM

hey i give you credit for doing all that job for just the boll joint, first time i did on the mr2 it drove me nuts (i have done a lot of boll joints) and yes the hammer trick didnt work for me, but i bought the boll joint remover tool for 20$ and it worked fine didnt care about the boot, the new has it on. Next time try to take it out with out removing the strut or the hole lower controll arm it will work , and it will save a lot of time.

06-17-2006, 08:55 PM	#34 (permalink)
arber0214 OT people blew me hard Join Date: May 2006 Location: MA Posts: 2,819 Thanks: 11 Thanked 95 Times in 93 Posts My Google Map iTrader Rating: (5/100% )	hey i give you credit for doing all that job for just the boll joint, first time i did on the mr2 it drove me nuts (i have done a lot of boll joints) and yes the hammer trick didnt work for me, but i bought the boll joint remover tool for 20$ and it worked fine didnt care about the boot, the new has it on. Next time try to take it out with out removing the strut or the hole lower controll arm it will work , and it will save a lot of time.