bleach with car soap.

Ku-sama · 09-02-2009, 01:25 AM

could I use bleach with my soap to wash my car and help bring my car back to a whiter white?

MR JAS · 09-02-2009, 03:36 AM

id try tooth whitener

GR8MR2 · 09-02-2009, 09:12 PM

No. You need a paint cleaner or a polish.

KyleScha · 09-03-2009, 02:11 AM

lol, you were being serious. After you wash it I doubt itll hold onto any dirt like it did before I detailed it.

mr2tim · 09-03-2009, 06:22 AM

You might want to check if your dealing with a original OEM clearcoat deteriation or maybe a recent Earl Scrieb paint with no sealer.

If your messing with just paint a rubbing compound might bring results.(GR8MR2)

If you have a clearcoat problem it's a different set of fixes.

Dude, keep that bleach away from you and the car, it's a real real bad corrosive chemical.

canadam · 09-03-2009, 10:08 AM

Try a clay bar and see what kind of results you get.

Ku-sama · 09-03-2009, 12:37 PM

Quote:

Originally Posted by canadam

Try a clay bar and see what kind of results you get.

well, Kyle detailed the crap out of my car, but for some reason it seems to be a dull white. maybe it's just the fact that it's super white 1 and not 2. who knows.

Redstar · 09-03-2009, 04:16 PM

Quote:

Originally Posted by Ku-sama

could I use bleach with my soap to wash my car and help bring my car back to a whiter white?

Only if you wash it with your other whites in hot water on the gentle cycle?!

Don't do it. It will not make your car whiter. Try polishing it, I like this stuff
Meguiar's Direct Show Car Glaze -

Indysw20 · 09-03-2009, 04:52 PM

I have/Had the same problem i got my Mr2 about 2 months ago. After having a couple of new vehicles i was used to that glassy shine. Mr2 seemed to be having some problems so this is what i did.First was the car and rinse thoroughly. I first used Meguiars Clay bar over the whole car. Worked great. When using this product the key is to let the clay bar do the work no need for lots of pressure on the clay just be through and consistent. When doing this do not drop the clay bar on the ground as it will pick up whatever is on the ground. Also be sure to knead the clay so you can use a clean side of the clay. Next i used meguiars NXT tech 2.0 wax. 2 coats and she started to feel glossy again. Hope this Helps

Ku-sama · 09-03-2009, 05:00 PM

Quote:

Originally Posted by Ku-sama

well, Kyle detailed the crap out of my car, but for some reason it seems to be a dull white. maybe it's just the fact that it's super white 1 and not 2. who knows.

answered my own question, thanks guys.

my shine is perfect, but my car is just a dull white, not a brilliant white like it would blind me when I look at it

KyleScha · 09-05-2009, 11:33 AM

Yeah I think it has to do more with the color of the paint, and the fact that whites tend to turn a bit yellow over time. No amount of polish can fix that. No one will notice though, your car looked pretty good

Ku-sama · 09-05-2009, 11:46 AM

Quote:

Originally Posted by KyleScha

Yeah I think it has to do more with the color of the paint, and the fact that whites tend to turn a bit yellow over time. No amount of polish can fix that. No one will notice though, your car looked pretty good

yeah, I want to get it painted ASAP, I'm thinking Shiro 300zx white.

David · 09-05-2009, 12:49 PM

no! Just go super white II

09-02-2009, 01:25 AM	#1 (permalink)
Ku-sama Cage Fighter Join Date: Mar 2008 Location: Germantown, MD Posts: 1,466 Thanks: 8 Thanked 31 Times in 31 Posts My Google Map iTrader Rating: (2/100% )	bleach with car soap. could I use bleach with my soap to wash my car and help bring my car back to a whiter white?

09-03-2009, 10:08 AM	#6 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 9,549 Thanks: 117 Thanked 129 Times in 112 Posts My Google Map iTrader Rating: (29/100% )	Try a clay bar and see what kind of results you get. __________________ WTB ASAP: Black Glove Box Surround - Not the box itself, but the dash plastics it sits in 3SGTE Upper Timing Belt Cover Driver's side seatback - must have bolster and lumbar adjustments, cover condition does not matter - will trade non-adjustable. Genuine Tom's Sides and Rear - replica kits not considered Frunk Plastics - no cracks Mechanical Gauge Cluster - KP/H preferred, but not required. Engine Bay X Brace

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-02-2009, 03:36 AM	#2 (permalink)
MR JAS alfa 155 v6 manual>>> mr2 Join Date: Apr 2009 Location: hamilton new zealand Posts: 356 Thanks: 7 Thanked 9 Times in 8 Posts iTrader Rating: (0/0% )	id try tooth whitener

09-02-2009, 09:12 PM	#3 (permalink)
GR8MR2 MR2 owner since 1990 Join Date: Sep 2007 Location: Wisconsin/Florida Posts: 53 Thanks: 2 Thanked 21 Times in 12 Posts iTrader Rating: (0/0% )	No. You need a paint cleaner or a polish.

09-03-2009, 02:11 AM	#4 (permalink)
KyleScha Cage Fighter Join Date: May 2005 Location: Fairfax, VA Posts: 199 Thanks: 1 Thanked 2 Times in 2 Posts iTrader Rating: (0/0% )	lol, you were being serious. After you wash it I doubt itll hold onto any dirt like it did before I detailed it.

09-03-2009, 06:22 AM	#5 (permalink)
mr2tim SUPERcharZed ToyZ RacZer Join Date: Mar 2008 Location: South Florida Posts: 690 Thanks: 2 Thanked 41 Times in 38 Posts My Google Map iTrader Rating: (2/100% )	You might want to check if your dealing with a original OEM clearcoat deteriation or maybe a recent Earl Scrieb paint with no sealer. If your messing with just paint a rubbing compound might bring results.(GR8MR2) If you have a clearcoat problem it's a different set of fixes. Dude, keep that bleach away from you and the car, it's a real real bad corrosive chemical.

09-03-2009, 04:52 PM	#9 (permalink)
Indysw20 Noob for now Join Date: Jul 2009 Location: Indianapolis Posts: 53 Thanks: 8 Thanked 4 Times in 4 Posts My Google Map iTrader Rating: (0/0% )	I have/Had the same problem i got my Mr2 about 2 months ago. After having a couple of new vehicles i was used to that glassy shine. Mr2 seemed to be having some problems so this is what i did.First was the car and rinse thoroughly. I first used Meguiars Clay bar over the whole car. Worked great. When using this product the key is to let the clay bar do the work no need for lots of pressure on the clay just be through and consistent. When doing this do not drop the clay bar on the ground as it will pick up whatever is on the ground. Also be sure to knead the clay so you can use a clean side of the clay. Next i used meguiars NXT tech 2.0 wax. 2 coats and she started to feel glossy again. Hope this Helps

09-05-2009, 11:33 AM	#11 (permalink)
KyleScha Cage Fighter Join Date: May 2005 Location: Fairfax, VA Posts: 199 Thanks: 1 Thanked 2 Times in 2 Posts iTrader Rating: (0/0% )	Yeah I think it has to do more with the color of the paint, and the fact that whites tend to turn a bit yellow over time. No amount of polish can fix that. No one will notice though, your car looked pretty good

09-05-2009, 12:49 PM	#13 (permalink)
David Take a picture trick! Join Date: Jun 2007 Location: Tampa, Fl. Posts: 1,296 Thanks: 111 Thanked 25 Times in 25 Posts My Google Map iTrader Rating: (4/100% )	no! Just go super white II