OEM Info on MR2 G-Limited

[Servin]

I found some great Stock Information for the SW20 G-Limited BEAMS car. It came in 2 options beside the G-limited a X-type the base and the M-type. Now the celica guys should recognize theM-type from the last generation of celica.

MR2 X type (G-Limited) spec 　



SW20 G-Limited X type leading particular chart

Car species name MR2
Car name type E-SW20-ACMQF (L)
Drive system Rear wheel drive
Transmission 5 fast manuals

Size
Total length　　　 4,170mm
Full-width　　　　 1,695mm
Total height　　　　 1,235mm
Interior length　　　 940mm
Interior width　　　 1,420mm
Interior high　　　 1,030mm
Wheel base　 2,400mm
Tread (before)　　 1,470mm
Tread (after)　　 1,450mm
Terrestrial lowest high　　　 130mm
Vehicle weight　 1220 kg
Riding in a car fixed capacity 2 names
The number of doors 2

Engine
Type Serial 4 cylinder DOHC16 valves
Type 3S-GE
Added information VVT-i
Total cubic displacement 1998 cc
Compression ratio 11.0
Inside diameter (bore) 86.0 mm
Distance (stroke) 86.0 mm
Fuel injector EFI-L
Use fuel Unleaded premium gasoline
Fuel tank capacity 54 L

Efficiency
The highest output　　 200 ps/7000 rpm
Largest torque　　　 21.0 kg m/6000 rpm
Fuel consumption rate (10/15 mode travelling) 12.4 km/L
Minimum turning radius　　　　　 4.9m

Change gear ratio
1st gear　 3.285
2nd gear 1.960
3rd gear 1.322
4th gear　 1.028
5 speeds　 0.820
Retreat　 3.153
Reduction gear ratio 4.176 　

Power transmission/ Running gear
Steering device type　　 Power assist equipped rack & pinion
Tire (before)　 195/55R 1584 V (15×6JJ aluminum)
Tire (after) 225/50R 1591 V (15×7JJ aluminum)
Brake system (before) Ventilated disk
Brake system (after)　 Ventilated disk
Suspension (before) Strut type coil spring
Suspension (after) Strut type coil spring
Safety equipment ABS Standard (sport ABS)
SRS air bag (driver's seat) Standard
SRS air bag (suicide seat) Standard
Helical LSD M option
Battery 55D23L

Standard-vehicle itself price (Tokyo area) 237.5 ten thousand Yen ('97.12 - '99.8)

[Servin]

Service data such as wheel alignment


Front Wheel Alignment

Toe in:
Inspection reference level 1±2mm
Adjustment reference level 1±1mm

Wheel being cut off angle:
Inside 37°±1°30 '
Outside (reference) 32°

Camber:
-1°00 & ±45 '

Caster:
3°15 & ±45 & 217mm

King pin angle :
13°50 & ±45 & 217mm

Rear Wheel Alignment

Toe in:
Inspection reference level 4±2mm
Adjustment reference level 4±1mm

Camber:
-1°35 & ±45 '

[Servin]

Service data such as relationship of engine

Engine type 3S−GE

V belt deflection and tension:
Serpentine:
Deflection 9 - 12mm (new item)
10 - 15mm (inspection)
A/C Belt:
Deflection 5.8 - 7mm (new item) 7.4 - 9.8mm (inspection)
Tension 539 - 367N (new item) 245 - 392N (inspection)

Ignition Timing:
T terminal short circuit: 8 - 12/750±50
T terminal opening: 7 - 21/750±50

Idling rpm:
700 - 800 rpm

Idling CO density:
1.0% or less

Idling HC density:
Below 800ppm

Valve clearance (at the time of cold):
IN 0.17 - 0.27mm
OUT 0.32 - 0.42mm

Compression pressure:
Reference level 1.37Mpa
Limit 1.08Mpa
Cylinder difference Below 0.1Mpa

Sparkplug gap:
Reference level 1.0 - 1.1mm
Limit 1.3mm

Radiator cap injection-valve open pressure:
Reference level 74 - 103Kpa
Limit 59Kpa

Motor oil:
Only oil when exchanging 4.0 L
Oil At the time of oil filter exchange 4.5 L

Chilled water:
13.7 L

Manual Transaxle oil (The differential it includes):
S54: 2.2L　
S54 (helical LSD): 2.1L

Power-steering fluid:
0.7L

[Servin]

All of this info can be viewed here along with pictures of a stock BEAMS Equipped G-Limited MR2, some pictures of said MR2 at a Gymkhana course, and a little bit of the Toyota brochure.

MR2 - My auuuto jp-