![]() |
|
|
|||||||
| BEAMS Owners Group Discussion forum for the Beams Owners Group |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Some Skills
|
No fuel/not firing
Were having a problem starting the motor. First it was the temp gauge problem that was brought a while back, but that problem is fixed.
The problem now is it seems as the injectors arent working. We can crank it, but it wont catch. We sprayed carb fluid in the mainfold to make sure we got spark and the motor turned on. We took out the spark plugs and we smell no fuel. What else could be the problem? We are going to try the EFI relay, but other than that what could the problem be? No engine codes either. |
|
|
|
|
|
#2 (permalink) |
|
No Drifting Skills
Join Date: Jun 2008
Location: Chicago
Posts: 948
Thanks: 3
Thanked 18 Times in 18 Posts
iTrader Rating: (2/100% ) |
How long has the car been sitting?
After a while gasoline starts to gel up and you'll have to drain it and put some new fresh gas in there |
|
|
|
|
|
#3 (permalink) |
|
U-P-G-R-A-Y-E-D-D
Join Date: Jan 2008
Location: Sunny South Florida
Posts: 5,881
Thanks: 53
Thanked 283 Times in 272 Posts
Blog Entries: 1
My Google Map iTrader Rating: (2/100% ) |
Have you gotten a fuel pressure reading? Possibly a bad pump.
|
|
|
|
|
|
#5 (permalink) |
|
U-P-G-R-A-Y-E-D-D
Join Date: Jan 2008
Location: Sunny South Florida
Posts: 5,881
Thanks: 53
Thanked 283 Times in 272 Posts
Blog Entries: 1
My Google Map iTrader Rating: (2/100% ) |
but are you getting fuel pressure at the rail?
|
|
|
|
|
|
#6 (permalink) |
|
No Skills
Join Date: Mar 2009
Location: Netherlands
Posts: 10
Thanks: 1
Thanked 0 Times in 0 Posts
iTrader Rating: (0/0% ) |
no feul
I am almost sure that the needle is fixed in the injector. you can try to put with a wire by ticking on the accu pole for A SHORT Time 12 volts on the injector. But the best solution is to let them clean in a ultrasone bath.
Greetings Hasta |
|
|
|
|
|
#8 (permalink) | |
|
Beams Owners Group
Join Date: Aug 2006
Location: Aruba, #1 BEAMS Engine on the Island
Posts: 2,339
Thanks: 28
Thanked 57 Times in 56 Posts
My Google Map iTrader Rating: (1/100% ) |
Quote:
ultrasound bij de weg. Have your injectors cleaned out, possibly swap out for new ones if they are stuck-ish real bad. Make sure you have current running to the "Head", remove an injector plug and ground it with a volt meter with key at ign-on, should read something |
|
|
|
|
| The Following User Says Thank You to puretone For This Useful Post: | hasta (03-17-2009) |
|
|
#9 (permalink) |
|
No Skills
Join Date: Mar 2009
Location: Netherlands
Posts: 10
Thanks: 1
Thanked 0 Times in 0 Posts
iTrader Rating: (0/0% ) |
Geweldig is dit, Mijn eigen prive vertalingsservice. haha
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|