celica beams harness good enough for mr2?

[I||ICIT]

hi all, still researching and saving for the beams --> 1990 sw20 project.

ive found a beams front cut from a celica which includes basically everything included with a front cut for a running engine except the transmission(auto so it doesnt matter)

the listing states:
"Fresh Japanese Import Toyota Celica 99 SS-II ST202 Auto 3S-GE VVT-I Beams Engine with all engine bay electrics and computer with complete loom from engine to computer with all engine bay sensors"

does this mean that essentially to get this running in the mr2 ill have to put this into the engine bay, hook everything up and supply voltage to the ecu etc and it should run? no need for an mr220v modded harness or anything like that?

hope im clear enough to understand, cheers guys-
-isaac-

[MANDALAY]

Originally Posted by I||ICIT

hi all, still researching and saving for the beams --> 1990 sw20 project.

ive found a beams front cut from a celica which includes basically everything included with a front cut for a running engine except the transmission(auto so it doesnt matter)

the listing states:
"Fresh Japanese Import Toyota Celica 99 SS-II ST202 Auto 3S-GE VVT-I Beams Engine with all engine bay electrics and computer with complete loom from engine to computer with all engine bay sensors"

does this mean that essentially to get this running in the mr2 ill have to put this into the engine bay, hook everything up and supply voltage to the ecu etc and it should run? no need for an mr220v modded harness or anything like that?

hope im clear enough to understand, cheers guys-
-isaac-

Save the head aches and get mr220v to do the harness.
Then best read the threads and see all the other parts you need. START saving or you need to do some retrofiting

[Adex]

If you're interested, I'm swapping an MR2 beams into my Celica & have been trying to find someone on MR2.com that is doing what you're looking at.
Basically, I'd like to know if you'd consider doing a swap of the following parts?
Alternator bracket, (mine could be made to fit, but would require cutting - tbh I'd rather have a proper one).
Alternator, (Different mountings)
Thermostat Housing, (Different angle)
Dipstick, (Different angle - I'm told the Celica one doesn't fit in an MR2 engine bay.)
Water Outlet - Gearbox end - (MR2's have an extra pipe) This includes the fuel pipes attatched to it.
The block off plate for the head and the engine mount (Which joins onto the block off plate - Not sure if all MR2s have a similar arrangement).
The Crankshaft pulley.
And of course, the wiring loom too.
This would save both of us a lot of hard work & our swaps should be more or less plug & play.
I can arrange discounted shipping too as I work for UPS!
If you are interested, or interested enough to want to know more, message me or email me.

[I||ICIT]

hey adex, saw your other post and i have to say im really keen to get/swap some of your bits but tbh, i dont have the money right now, and prob wont for ~2 months or so...

the wiring loom would be the one im keen on the most!
where abouts are you btw? im in auckland, new zealand if thats close enough lol :P

[NCMR2]

Alex, I am swapping a silvertop into my MR2. Do you still have those extra parts?