Blink code (error code)

[bijtec]

Hello,

Wich pin you have to connect to a lamp, so you can read an error code?
And does anyone have the meaning of these error codes.
I already know what pin you have to earth to get the code (c5).
I dont have a gauge cluster so that is why i dont have a lamp connected.
I it thrue that the ecu must see an error lamp in its wiring loom?

Hope to hear from you all.

Greetings from Holland

[mr2tim]

Sorry to hear about your attempted assassination, no body seems exempt from crazy people nowadays.

You may be able to get a output from the W Terminal which is the Warning Light at the ECU if you run the 4a-ge or 4a-gze computer.
1. 0.5 volts with ignition on


You can find these locations at the ECU connector on pages FL-123 &125 respectively of the Service Manual.

You will of course, have to short the T and E1 at the check connector like always. (w ign on!)


Hope this can get you where you need to go brother.

Tim
Supercharzed Toyz Race Team
Boca Raton, Florida
(like next to the Everglades)

Originally Posted by bijtec

Hello,

Wich pin you have to connect to a lamp, so you can read an error code?
And does anyone have the meaning of these error codes.
I already know what pin you have to earth to get the code (c5).
I dont have a gauge cluster so that is why i dont have a lamp connected.
I it thrue that the ecu must see an error lamp in its wiring loom?

Hope to hear from you all.

Greetings from Holland

[bijtec]

Originally Posted by mr2tim

Sorry to hear about your attempted assassination, no body seems exempt from crazy people nowadays.

You may be able to get a output from the W Terminal which is the Warning Light at the ECU if you run the 4a-ge or 4a-gze computer.
1. 0.5 volts with ignition on


You can find these locations at the ECU connector on pages FL-123 &125 respectively of the Service Manual.

You will of course, have to short the T and E1 at the check connector like always. (w ign on!)


Hope this can get you where you need to go brother.

Tim
Supercharzed Toyz Race Team
Boca Raton, Florida
(like next to the Everglades)

Thank you for your answer but it is a 3sge 4th gen beams red top ecu.

[vvt162]

4th gen 3sge(Redtop) pin D6 - W. It's a pulldown to ground when active.