REALLY, REALLY need a wiring loom & alternator mount!

[I||ICIT]

hi all, as you prob saw, user "adex" has purchased a beams clip which turns out is from an mr2.
ive been talking with him and he's keen to swap the mr2 bits i need for the celica bits he needs... sooooooo

does anyone have a reverse MR2>celica beams swap spares?
its mainly the alternator mount, and the full wiring loom incl the headlight section and fuse box.

im in new zealand, so reasonably "local" (nz, oz japan or nearby is preferred)


can anyone help?
cheers all.

[mr220v]

Beams mr2 harnesses are hard to come by.

For the alternator, just use the one that came with your last engine. My 5sfe alternator and mounting hardware works fine.

[MANDALAY]

^ the way i read it he wants the Celica things , loom , bracket ,etc so he can trade for the MR2 Parts

[mr220v]

I see. I guess he doesn't have a celica mount to give him.

I'd send you mine....except without it coolant comes spilling out of the motor. Gotta have something there to plug the hole.

[I||ICIT]

yea, thanks mr220v, i sorta figured no-one was gonna offer up one they already have mounted on the car lol


ive had another guy offer me a black top alternator and mounting bracket, id assume the alternator should fit, and i think adex has a mount, he mentioned something bout his alternator being broken :S

will check back...

edit:
this is part message from adex:
"Just thought I'd mention I've already found an alternator mount, so its just the actual alternator I need (the guy who's got it reckons its got a broken terminal).
I will get in touch with him again to see if maybe it's repairable?"

so in that case, anyone have a suitable alternator in the u.k where adex is?

[MANDALAY]

You assume wrong, sorry mate

[MANDALAY]

Things that need to be swaped ,
air box
charcoal canister
water outlet
water hoses in and out
dip stick
crank pulley
alternator bracket
alternator
idler pulley and bracket complete
crankshaft pulley
wiring ( definitely best left to some one who knows ) unless its un cut
engine mount
belts
sheilds
b-pipe
gear box or simpler to re jig it
Air conditioner compressor
power steering and all the associated brackets and piping
bolts ,nuts
Fuel lines
fuel return
clips
Gasket
Crankcase vent hoses
Brake vacuum hose
Heater hoses
So there are a lot of things.
How do i know this well needed some of this just to put my SC in

NOTE
This is for making a Celica Beams into an OEM MR2 Beams.
However not all the above are necessary to do a swap as some creative workings can make it work.
This is to finally show all the different parts between the Celica and the MR2

[MANDALAY]

bump.
Because a lot of people are asking me the differences b/w the two