Timing Belt just arrived!

TL Randz · 07-24-2010, 06:50 AM

Packaging sticker # 13568-80015 and in the belt itself labeled # 13658-88560 which confirms the 2 number series refers only to one specific belt.

Now I'll be off buying the tensioner bearing and the idler bearing and oils seals (crank shaft, intake and exhaust shafts). Are these the same from the gen 3 3sge?

Appreciate the inputs.

MANDALAY · 07-24-2010, 07:20 AM

TL Randz · 08-20-2010, 10:34 AM

Update:

New belt installed with new bearings. Idler bearing is the same as with 3SFE.

MANDALAY · 08-20-2010, 10:44 AM

I hope you properly lined up the belt ?

TL Randz · 08-20-2010, 01:00 PM

Did everything by the book... Engine's running excellent for 2 weeks now..

Quote:

Originally Posted by MANDALAY

I hope you properly lined up the belt ?

puretone · 08-20-2010, 03:51 PM

Quote:

Originally Posted by TL Randz

Update:

New belt installed with new bearings. Idler bearing is the same as with 3SFE.

http://i82.photobucket.com/albums/j2.../IMG_16941.jpg

Got the part number to the 3S-FE idler? Is it RAV4 3S-FE? If RAV4 idler, which year?

MANDALAY · 08-20-2010, 07:08 PM

Well done

TL Randz · 08-21-2010, 02:10 AM

Quote:

Originally Posted by puretone

Got the part number to the 3S-FE idler? Is it RAV4 3S-FE? If RAV4 idler, which year?

13503-63011 part number. nothing changed on the block side for 3sfe until 98'. RAV4 or Carina will be the same in terms of the bearing. Older 3sge have wider bearings but the same diameter and bolt hole. I've seen those from the shops here.. In the TOYODIY site for st202, you'll see that the tensioner sub assbly #2 (idler) indicated also for 3sfe..

@ Mandalay: thanks man..

puretone · 08-22-2010, 11:46 AM

Quote:

Originally Posted by TL Randz

13503-63011 part number. nothing changed on the block side for 3sfe until 98'. RAV4 or Carina will be the same in terms of the bearing. Older 3sge have wider bearings but the same diameter and bolt hole. I've seen those from the shops here.. In the TOYODIY site for st202, you'll see that the tensioner sub assbly #2 (idler) indicated also for 3sfe..

@ Mandalay: thanks man..

This is good to know bc where I have my BEAMS'd powered car is full of 3S-FE powered RAV4's

07-24-2010, 06:50 AM	#1 (permalink)
TL Randz Beams Owners Group Join Date: Dec 2009 Location: Manila, Philippines Posts: 79 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Timing Belt just arrived! Packaging sticker # 13568-80015 and in the belt itself labeled # 13658-88560 which confirms the 2 number series refers only to one specific belt. Now I'll be off buying the tensioner bearing and the idler bearing and oils seals (crank shaft, intake and exhaust shafts). Are these the same from the gen 3 3sge? Appreciate the inputs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-24-2010, 07:20 AM	#2 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,210 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	no

08-20-2010, 10:34 AM	#3 (permalink)
TL Randz Beams Owners Group Join Date: Dec 2009 Location: Manila, Philippines Posts: 79 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Update: New belt installed with new bearings. Idler bearing is the same as with 3SFE.

08-20-2010, 10:44 AM	#4 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,210 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	I hope you properly lined up the belt ?

08-20-2010, 07:08 PM	#7 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 4,210 Thanks: 136 Thanked 112 Times in 107 Posts My Google Map iTrader Rating: (6/100% )	Well done