REALLY, REALLY need a wiring loom & alternator mount!

I||ICIT · 05-12-2009, 04:53 AM

hi all, as you prob saw, user "adex" has purchased a beams clip which turns out is from an mr2.
ive been talking with him and he's keen to swap the mr2 bits i need for the celica bits he needs... sooooooo

does anyone have a reverse MR2>celica beams swap spares?
its mainly the alternator mount, and the full wiring loom incl the headlight section and fuse box.

im in new zealand, so reasonably "local" (nz, oz japan or nearby is preferred)

can anyone help?
cheers all.

mr220v · 05-12-2009, 09:18 AM

Beams mr2 harnesses are hard to come by.

For the alternator, just use the one that came with your last engine. My 5sfe alternator and mounting hardware works fine.

MANDALAY · 05-12-2009, 03:18 PM

^ the way i read it he wants the Celica things , loom , bracket ,etc so he can trade for the MR2 Parts

mr220v · 05-12-2009, 04:01 PM

I see. I guess he doesn't have a celica mount to give him.

I'd send you mine....except without it coolant comes spilling out of the motor. Gotta have something there to plug the hole.

I||ICIT · 05-13-2009, 05:45 AM

yea, thanks mr220v, i sorta figured no-one was gonna offer up one they already have mounted on the car lol

ive had another guy offer me a black top alternator and mounting bracket, id assume the alternator should fit, and i think adex has a mount, he mentioned something bout his alternator being broken :S

will check back...

edit:
this is part message from adex:
"Just thought I'd mention I've already found an alternator mount, so its just the actual alternator I need (the guy who's got it reckons its got a broken terminal).
I will get in touch with him again to see if maybe it's repairable?"

so in that case, anyone have a suitable alternator in the u.k where adex is?

MANDALAY · 05-13-2009, 05:51 AM

You assume wrong, sorry mate

MANDALAY · 05-13-2009, 06:00 AM

Things that need to be swaped ,
air box
charcoal canister
water outlet
water hoses in and out
dip stick
crank pulley
alternator bracket
alternator
idler pulley and bracket complete
crankshaft pulley
wiring ( definitely best left to some one who knows ) unless its un cut
engine mount
belts
sheilds
b-pipe
gear box or simpler to re jig it
Air conditioner compressor
power steering and all the associated brackets and piping
bolts ,nuts
Fuel lines
fuel return
clips
Gasket
Crankcase vent hoses
Brake vacuum hose
Heater hoses
So there are a lot of things.
How do i know this well needed some of this just to put my SC in

NOTE
This is for making a Celica Beams into an OEM MR2 Beams.
However not all the above are necessary to do a swap as some creative workings can make it work.
This is to finally show all the different parts between the Celica and the MR2

MANDALAY · 05-20-2009, 02:41 AM

bump.
Because a lot of people are asking me the differences b/w the two

05-12-2009, 04:53 AM	#1 (permalink)
I\|\|ICIT No Skills Join Date: Feb 2009 Posts: 45 Thanks: 22 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	REALLY, REALLY need a wiring loom & alternator mount! hi all, as you prob saw, user "adex" has purchased a beams clip which turns out is from an mr2. ive been talking with him and he's keen to swap the mr2 bits i need for the celica bits he needs... sooooooo does anyone have a reverse MR2>celica beams swap spares? its mainly the alternator mount, and the full wiring loom incl the headlight section and fuse box. im in new zealand, so reasonably "local" (nz, oz japan or nearby is preferred) can anyone help? cheers all.

05-13-2009, 06:00 AM	#7 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 1,829 Thanks: 88 Thanked 64 Times in 60 Posts My Google Map iTrader Rating: (4/100% )	Things that need to be swaped , air box charcoal canister water outlet water hoses in and out dip stick crank pulley alternator bracket alternator idler pulley and bracket complete crankshaft pulley wiring ( definitely best left to some one who knows ) unless its un cut engine mount belts sheilds b-pipe gear box or simpler to re jig it Air conditioner compressor power steering and all the associated brackets and piping bolts ,nuts Fuel lines fuel return clips Gasket Crankcase vent hoses Brake vacuum hose Heater hoses So there are a lot of things. How do i know this well needed some of this just to put my SC in NOTE This is for making a Celica Beams into an OEM MR2 Beams. However not all the above are necessary to do a swap as some creative workings can make it work. This is to finally show all the different parts between the Celica and the MR2 Last edited by MANDALAY; 05-20-2009 at 02:39 AM. Reason: soory i just keep adding to the list

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-12-2009, 09:18 AM	#2 (permalink)
mr220v Beams Owners Group Join Date: Mar 2006 Posts: 1,791 Thanks: 13 Thanked 139 Times in 117 Posts iTrader Rating: (8/100% )	Beams mr2 harnesses are hard to come by. For the alternator, just use the one that came with your last engine. My 5sfe alternator and mounting hardware works fine.

05-12-2009, 03:18 PM	#3 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 1,829 Thanks: 88 Thanked 64 Times in 60 Posts My Google Map iTrader Rating: (4/100% )	^ the way i read it he wants the Celica things , loom , bracket ,etc so he can trade for the MR2 Parts

05-12-2009, 04:01 PM	#4 (permalink)
mr220v Beams Owners Group Join Date: Mar 2006 Posts: 1,791 Thanks: 13 Thanked 139 Times in 117 Posts iTrader Rating: (8/100% )	I see. I guess he doesn't have a celica mount to give him. I'd send you mine....except without it coolant comes spilling out of the motor. Gotta have something there to plug the hole.

05-13-2009, 05:45 AM	#5 (permalink)
I\|\|ICIT No Skills Join Date: Feb 2009 Posts: 45 Thanks: 22 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	yea, thanks mr220v, i sorta figured no-one was gonna offer up one they already have mounted on the car lol ive had another guy offer me a black top alternator and mounting bracket, id assume the alternator should fit, and i think adex has a mount, he mentioned something bout his alternator being broken :S will check back... edit: this is part message from adex: "Just thought I'd mention I've already found an alternator mount, so its just the actual alternator I need (the guy who's got it reckons its got a broken terminal). I will get in touch with him again to see if maybe it's repairable?" so in that case, anyone have a suitable alternator in the u.k where adex is?

05-13-2009, 05:51 AM	#6 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 1,829 Thanks: 88 Thanked 64 Times in 60 Posts My Google Map iTrader Rating: (4/100% )	You assume wrong, sorry mate

05-20-2009, 02:41 AM	#8 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 1,829 Thanks: 88 Thanked 64 Times in 60 Posts My Google Map iTrader Rating: (4/100% )	bump. Because a lot of people are asking me the differences b/w the two