aftermarket ecu altezza

terolla · 05-13-2009, 10:21 AM

which is the best aftermarket ecu for the altezza beams and why

mr2nv · 05-13-2009, 02:35 PM

You can have the best ECU but if you don't have a tuner for it, than what's the point? With that said, I don't believe it gets much better than Motec. Just make sure the ECU you get can control dual vvti if it's a blacktop.

puretone · 05-13-2009, 05:57 PM

Power FC, simple *almost* plug and play, not too many tuning capabilities due to simplicity

Celica RA45 · 05-14-2009, 01:51 AM

im using a m800 motec on my race altezza motor ,as im using 8 injectors 50mm throttles and still using some vvti and its so easy once you have it tuned and set up
there are others that do vvti as well autronic .adaptronic .link and maybe wolf ems as well

darcia1 · 05-15-2009, 11:47 PM

I agree with the boys saying motec but it does get rather expensive buying the upgrades im going to use the magnetti marelli for my beams . no upgrades to buy it will take the vvti and aything else you can throw at it and the distrbutor is local melb and is very helpful

05-13-2009, 10:21 AM	#1 (permalink)
terolla No Skills Join Date: Apr 2009 Location: new york usa Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	aftermarket ecu altezza which is the best aftermarket ecu for the altezza beams and why

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-13-2009, 02:35 PM	#2 (permalink)
mr2nv Beams Owners Group Join Date: Mar 2007 Posts: 136 Thanks: 0 Thanked 8 Times in 6 Posts iTrader Rating: (1/100% )	You can have the best ECU but if you don't have a tuner for it, than what's the point? With that said, I don't believe it gets much better than Motec. Just make sure the ECU you get can control dual vvti if it's a blacktop.

05-13-2009, 05:57 PM	#3 (permalink)
puretone Beams Owners Group Join Date: Aug 2006 Location: Aruba, #1 BEAMS Engine on the Island Posts: 1,352 Thanks: 24 Thanked 46 Times in 45 Posts My Google Map iTrader Rating: (0/0% )	Power FC, simple almost plug and play, not too many tuning capabilities due to simplicity

05-14-2009, 01:51 AM	#4 (permalink)
Celica RA45 Beams Owners Group Join Date: Aug 2006 Location: sunny australia Posts: 337 Thanks: 0 Thanked 33 Times in 30 Posts My Google Map iTrader Rating: (0/0% )	im using a m800 motec on my race altezza motor ,as im using 8 injectors 50mm throttles and still using some vvti and its so easy once you have it tuned and set up there are others that do vvti as well autronic .adaptronic .link and maybe wolf ems as well

05-15-2009, 11:47 PM	#5 (permalink)
darcia1 Beams Owners Group Join Date: Apr 2009 Location: melbourne Australia Posts: 17 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I agree with the boys saying motec but it does get rather expensive buying the upgrades im going to use the magnetti marelli for my beams . no upgrades to buy it will take the vvti and aything else you can throw at it and the distrbutor is local melb and is very helpful