st204 celica and ST202 beams wiring

scottkun · 08-02-2009, 01:47 PM

I noticed that some of the wires did not match up fom the beams harness to the plugs near the ECM (ECU) the E3, E4 plugs -- theres 3 plugs - A big gray plug, a white, and a dark gray -- do you remember if you had to do any changing to them.

This picture are the plugs that came along with my beams harness -- it looks identical to the one inside the car - except some of the wires are different. Any help is appreciated. Thanks

MANDALAY · 08-03-2009, 12:08 AM

You need to ask mr220v

puretone · 08-03-2009, 07:48 AM

Quote:

Originally Posted by scottkun

I noticed that some of the wires did not match up from the beams harness to the plugs near the ECM (ECU)

QUOTE OF THE CENTURY!!

truth is, buddy, we all have plugs/wires that don't match up

mr220v · 08-03-2009, 09:42 AM

I generally just clip and discard those plugs. Even when doing wiring for a celica, I would use the old celica harness as the base, and the beams circuits added. I can never count on getting a complete beams harness, so I don't even bother with the bodyplug repin approach. Of course with mr2's, none of that is used.

Puretone and Mandalay are celica owners, and fought with these body connectors, the most likely have a pinout for them.

Teksi · 08-03-2009, 09:48 AM

You need to wire:

Abs ecu -> diagnostic box (TC)
Airbag warning light -> fusebox (srs-wrn 7,5A)

That's all I can remember.

scottkun · 08-03-2009, 02:49 PM

yeah - I found it out myself -- its alive - thank God. i was getting worried I couldn't figure it out.

puretone · 08-03-2009, 02:51 PM

Quote:

Originally Posted by mr220v

Puretone and Mandalay are celica owners, and fought with these body connectors, theY most likely have a pinout for them.

Didn't have one when I did it myself LOL, traced all those little bastards.....I always held reserved fears of the airbag blowing up in my face mid-shift due to it not being connected....hehehehehehe

scottkun · 08-03-2009, 03:11 PM

Quote:

Originally Posted by puretone

Didn't have one when I did it myself LOL, traced all those little bastards.....I always held reserved fears of the airbag blowing up in my face mid-shift due to it not being connected....hehehehehehe

Well - Mine was a salvage title vehicle when i bought it - air bags were already deployed - so i removed the airbag system - no worries there.

scottkun · 08-04-2009, 10:39 PM

Video0009-1.flv video by viet21hung - Photobucket

WFX · 08-06-2009, 06:31 AM

I shall dig out my wiring pinouts that I made up and upload them for you all again!

puretone · 08-06-2009, 12:40 PM

Quote:

Originally Posted by WFX

I shall dig out my wiring pinouts that I made up and upload them for you all again!

Please do, we could use it as well in the BEAMS pinouts/wiring sticky thread. My lazy ass never wrote it down & I basically followed your methods hehe

njccmd2002 · 08-16-2009, 09:55 PM

i have seen this celi somewhere. good job man.

08-02-2009, 01:47 PM	#1 (permalink)
scottkun No Skills Join Date: May 2009 Posts: 8 Thanks: 5 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	st204 celica and ST202 beams wiring I noticed that some of the wires did not match up fom the beams harness to the plugs near the ECM (ECU) the E3, E4 plugs -- theres 3 plugs - A big gray plug, a white, and a dark gray -- do you remember if you had to do any changing to them. This picture are the plugs that came along with my beams harness -- it looks identical to the one inside the car - except some of the wires are different. Any help is appreciated. Thanks

08-04-2009, 10:39 PM	#9 (permalink)
scottkun No Skills Join Date: May 2009 Posts: 8 Thanks: 5 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	some pics Video0009-1.flv video by viet21hung - Photobucket

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-03-2009, 12:08 AM	#2 (permalink)
MANDALAY Beams Owners Group Join Date: Feb 2007 Location: victoria AUSTRALIA Posts: 1,830 Thanks: 88 Thanked 64 Times in 60 Posts My Google Map iTrader Rating: (4/100% )	You need to ask mr220v

08-03-2009, 09:42 AM	#4 (permalink)
mr220v Beams Owners Group Join Date: Mar 2006 Posts: 1,791 Thanks: 13 Thanked 139 Times in 117 Posts iTrader Rating: (9/100% )	I generally just clip and discard those plugs. Even when doing wiring for a celica, I would use the old celica harness as the base, and the beams circuits added. I can never count on getting a complete beams harness, so I don't even bother with the bodyplug repin approach. Of course with mr2's, none of that is used. Puretone and Mandalay are celica owners, and fought with these body connectors, the most likely have a pinout for them.

08-03-2009, 09:48 AM	#5 (permalink)
Teksi Beams Owners Group Join Date: Sep 2007 Location: Finland Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	You need to wire: Abs ecu -> diagnostic box (TC) Airbag warning light -> fusebox (srs-wrn 7,5A) That's all I can remember.

08-03-2009, 02:49 PM	#6 (permalink)
scottkun No Skills Join Date: May 2009 Posts: 8 Thanks: 5 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	yeah - I found it out myself -- its alive - thank God. i was getting worried I couldn't figure it out.

08-06-2009, 06:31 AM	#10 (permalink)
WFX Beams Owners Group Join Date: Jun 2006 Location: Perth, Western Australia Posts: 337 Thanks: 9 Thanked 13 Times in 10 Posts My Google Map iTrader Rating: (0/0% )	I shall dig out my wiring pinouts that I made up and upload them for you all again!

08-16-2009, 09:55 PM	#12 (permalink)
njccmd2002 Beams Owners Group Join Date: May 2008 Location: Jackson TN Posts: 69 Thanks: 8 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	i have seen this celi somewhere. good job man.