I'm not very mechanically inclined and I was wondering how would you be able to vent the bypass valve to the atmosphere.

JustinS777

first post... I took off my calipers to get to my lower ball joints (they were acting up) everything went fine until i had to reinstall. First attempt I wasn't able to regain compression in the brakes (barely any, I would have to use my e brake if I wanted to drive anywhere) then I realized from my dad's advice that I didn't c clamp the piston all the way back in the caliper. Which I did the second time around, and gained full compression in my brakes after pumping them and adding new fluid,...

420mr2

My 90 RHD mr2 turbo is not spooling up, when i first bought it last spring it worked fine but took it out this spring and the turbo is basically doing nothing, also the engine cooling fan next to the intercooler is not working. Not much of a mechanic but if anybody could offer any help it would be much appreciated.

newbie101

HEY GUYS I'M NEW HERE. I HAVE A FEW THING THAT I LIKE TO SELL, I HAVE A 2ND GEN MR2 FUEL RAIL WITH INJECTORS(50PLUS SHIPPING) AND I HAVE ALSO A TURBO IGNITER PART# 89621-12010(60plus shipping). U CAN CHECK WITH THE DEALER. ALSO HAVE A 4AGE COIL AND IGNITER HAS 1 ROUND PLUG AND A SQUARE PLUG(80 plus shipping). WORK ON NA 4AGE MR2 TOO, JUST HAVE TO CHANGE THE PLUG EMAIL ME FOR PIC. IM UP FOR OFFERS, THANKS

MRDUECE2

Recently my 94 was crashed so i have embarked on creating a custom 91 turbo as an ode to my fallen dream car..

I bought the 94 by working my ass off 5 years ago.. i worked 60 hours a week for a whole summer and spend 6 g's on my 94...
She was sweat.. two tone black and tan interior with decent rims and only 78k on the odemeter...

I put about 137k on her when i lent her to a friend and she came back a disaster

...

warnersiegle