okay, so I guess I need a book called forums for dummies or something,

but how do i post my own new thread?

I know this is a blog and isn't the right place if I want to have a discussion and have people comment on and help me solve problems, or to give advice on what I've learned?

so how do I start a new thread or post or whatever?

please help! I'm too much of a noob :[

420mr2

okay, so I have a 1991 mr2 na, with about 227k miles on it. I was trying to install my radio, and in the process I blew some fuses for the dome lights (didn't diconnect battery, i know, i know) but anyway in the process of replacing those I blew more fuses because my fusebox was loose and touched on a metal piece.

those fuses i didn't replace yet, and they were for my gauges, so my h/c gauge, battery, and rpms all weren't working.

so, long story short, I was at taco...

420mr2

first post... I took off my calipers to get to my lower ball joints (they were acting up) everything went fine until i had to reinstall. First attempt I wasn't able to regain compression in the brakes (barely any, I would have to use my e brake if I wanted to drive anywhere) then I realized from my dad's advice that I didn't c clamp the piston all the way back in the caliper. Which I did the second time around, and gained full compression in my brakes after pumping them and adding new fluid,...

420mr2