Part: 2

Ok some1 bugged me to update so heres some.
New stuff some old
-2004 Sienna Grind kit (upper gasket kits)
-2000 Avalon BPB vol1-2 + wiring diagrams
-2002 Highlander Y-pipe needs some modification
-camry exhaust flex pipe (i'll be hacking up the 3 ends and working around the flex center piece)
New Problems!!!
-Stock sienna headers are useless. after finding out the front header hits the front motor mount bracket I decided to ditch the whole thing and use a non pre-cat manifold and run a direct pipe to the y-pipe then have a cat sticking near the turbo muffler (like brad's blue car setup)
-Y-pipe from the highlander could be an issue, It bends going upwards and a huge air resonator will definetly hit the lid. I'll try cutting the resonator and plug the hole but if it still becomes an issue i'll flip it upside down so it points down.
-Having issues trying to remove the side plate on the solara bellhousing. I'll try bashing it out again when i get my some strenght back