blah...

CEL
Cooling fan light
Brake bleed
clean
clean
clean

drvr5

Okay, so today after work I ran my '86 on our chassis dyno, exactly as I got it- killer power. 75 horse. As of current, it has 2 exhaust leaks, the previous owner hollowed out the muffler, leakdown is unknown, and seems to have a vacuum leak (high idle, stable)

Worklist:
new RF fender
paint
muffler
speedo cable
e-brake cable

drvr5

How'd I ever get into this?! -

I've always wanted an MR2, and I share a shop with two other MR2 enthusiasts. I started looking around the area for a project car to tackle, and a project car is what I found!

I bought this car as a total basket case. It'd been sitting behind a house for a couple years, and one day I finally talked to the owner about it. After some careful negotiation, I took it home for $700 w/wheels. The 5S had spun a bearing, and I pondered just plopping...

Gimpster

Specs:

Engine
2000 Solara 1MZ, CA spec
- Fully rebuilt: honed, re-ringed, extensively cleaned, resurfaced, new main, rod, and thrust bearings, new head bolts, ported heads with valve job, new water pump, new thermostat, new timing and accessory belt, new valve stem seals, new engine gaskets incl. MLS head gaskets, completely resealed with Permatex Ultra Copper RTV.
Injen Jet Black 1MZ intake system (CARB certified)
Stock cams

Transmission...

Jason.MZW20

Ok some1 bugged me to update so heres some.
New stuff some old
-2004 Sienna Grind kit (upper gasket kits)
-2000 Avalon BPB vol1-2 + wiring diagrams
-2002 Highlander Y-pipe needs some modification
-camry exhaust flex pipe (i'll be hacking up the 3 ends and working around the flex center piece)
New Problems!!!
-Stock sienna headers are useless. after finding out the front header hits the front motor mount bracket I decided to ditch the whole thing...

Oteck