ae86 tie rods/ends on a aw11

uncledose · 05-27-2008, 02:53 PM

So i was thinking today, i have a manual rack from a aw11 on my corolla with corolla tie rods and ends. So my thoughts were well since i can put ae86 tie rods/ends on a aw11 rack, is it possible to runs the after market t3 tie rods on my aw11 chassis. Basically the tie rods going onto the rack isnt the issue the length of the tie rod end is the issue and its mounting point. I thought i would ask before i experiment on my mr2. thanks guys. tried searching put came up empty handed.

2restomod · 07-01-2008, 12:33 AM

A little late, but iirc, there is a difference in the length of the early and later MKI outer tie rod ends. You could possibly try both to see if either would be the right length.

05-27-2008, 02:53 PM	#1 (permalink)
uncledose No Skills Join Date: May 2008 Posts: 21 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	ae86 tie rods/ends on a aw11 So i was thinking today, i have a manual rack from a aw11 on my corolla with corolla tie rods and ends. So my thoughts were well since i can put ae86 tie rods/ends on a aw11 rack, is it possible to runs the after market t3 tie rods on my aw11 chassis. Basically the tie rods going onto the rack isnt the issue the length of the tie rod end is the issue and its mounting point. I thought i would ask before i experiment on my mr2. thanks guys. tried searching put came up empty handed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-01-2008, 12:33 AM	#2 (permalink)
2restomod msnusers.com/mr2projects Join Date: Apr 2007 Location: Queen Creek, AZ Posts: 392 Thanks: 23 Thanked 15 Times in 15 Posts My Google Map iTrader Rating: (2/100% )	A little late, but iirc, there is a difference in the length of the early and later MKI outer tie rod ends. You could possibly try both to see if either would be the right length.