12sec sw20

iOnic · 09-12-2007, 08:44 AM

hi from new zealand. i'm Chris and this is MR2SLO. My 1990 sw20 t-top. It's mainly a street car/daily driver to work and back for me but i may try and dip further into the 12's during the upcoming drag season

Has the following done:

Engine
3S-GTE 2 litre turbocharged manual
Simota Pod filter and adapter
HKS Turbo Timer
Hybrid CT-26 Turbo
3" Stainless dump pipe
3" Racepro Stainless Exhaust (Full mandrel bent)
Carbon Fibre Muffler
Greddy sidemount intercooler kit
Greddy piping
Manual Boost controller

Drivetrain
Gen III MR2 Gearbox
LSD
Custom Close ratio gearsets
Exedy clutch kit

Suspension/Wheels
D2 Racing 36way Adjustable platform coilovers
D2 Racing Camber arms
D2 Racing Camber top hats
SSA 17" wheels (8" and 9" from memory)
Toyo Proxes 215 (front) 225 (rear)

Interior
Leater seats
Momo steering wheel
HKS gearknob
Autogauge Boost gauge
35% Professional Tints

Performance
Best ET: 12.8 (Toyo R888 street legal semi race tyres) - 13.1 (Toyo proxes road tyres)

mr2willwin · 09-12-2007, 11:10 AM

Very nice, looks to be quite clean! more pics?

iOnic · 09-12-2007, 11:13 AM

more info on the car is in the garage thing? (sorry not too sure how to work this site, i'm only new haha)
http://www.mr2.com/forums/vbpicgalle...?do=view&g=984

MR2TRD1 · 09-12-2007, 11:32 AM

talk about slammed!!!!!

iOnic · 09-12-2007, 12:11 PM

suspension can still go lower

exhaust is 40mm from the road at its lowest point though so yeah... here's a coupla pics i've just taken. this car isn't all bling and shiny like other cars but it does the job and does it well as many unsuspecting lancer evo/impreza sti owners have come to find

thanks for the welcome and comments

very friendly community here

you sort of get an idea of how low it is. sorry for bad lighting but this is the exhaust and the white is the floor

engine bay

intercooler piping

3sgte

gen III brakes

SSA 17" wheels

wheel arch clearance

need wheel spacers/wider rims

rear quarter

boost gauge

hks drift edition shiftknob

momo steering wheel

Ben · 09-12-2007, 01:52 PM

Can you see the boost gauge? It looks like the steering wheel is blocking it?

iOnic · 09-12-2007, 02:08 PM

unfortunately no i can't see the boost gauge while driving. the previous owner placed it in a position that is impossible to see while driving the car. i'll be moving it to an 'a pillar' gauge pod sooner or later but have to find a spare dash part to replace the one that is currently holding the boost gauge as it will have a hole in it

09-12-2007, 08:44 AM	#1 (permalink)
iOnic No Skills Join Date: Sep 2007 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	12sec sw20 hi from new zealand. i'm Chris and this is MR2SLO. My 1990 sw20 t-top. It's mainly a street car/daily driver to work and back for me but i may try and dip further into the 12's during the upcoming drag season Has the following done: Engine 3S-GTE 2 litre turbocharged manual Simota Pod filter and adapter HKS Turbo Timer Hybrid CT-26 Turbo 3" Stainless dump pipe 3" Racepro Stainless Exhaust (Full mandrel bent) Carbon Fibre Muffler Greddy sidemount intercooler kit Greddy piping Manual Boost controller Drivetrain Gen III MR2 Gearbox LSD Custom Close ratio gearsets Exedy clutch kit Suspension/Wheels D2 Racing 36way Adjustable platform coilovers D2 Racing Camber arms D2 Racing Camber top hats SSA 17" wheels (8" and 9" from memory) Toyo Proxes 215 (front) 225 (rear) Interior Leater seats Momo steering wheel HKS gearknob Autogauge Boost gauge 35% Professional Tints Performance Best ET: 12.8 (Toyo R888 street legal semi race tyres) - 13.1 (Toyo proxes road tyres)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.mr2.com/forums/check/Toyota-MR2-20963-12sec-sw20.html
Posted By	For	Type	Date
Toyota MR2 Message Board	This thread	Refback	09-12-2007 12:18 PM

09-12-2007, 11:10 AM	#2 (permalink)
mr2willwin Cage Fighter Join Date: Nov 2006 Location: Holladay, UT Posts: 334 Thanks: 15 Thanked 6 Times in 6 Posts My Google Map iTrader Rating: (0/0% )	Very nice, looks to be quite clean! more pics?

09-12-2007, 11:13 AM	#3 (permalink)
iOnic No Skills Join Date: Sep 2007 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	more info on the car is in the garage thing? (sorry not too sure how to work this site, i'm only new haha) http://www.mr2.com/forums/vbpicgalle...?do=view&g=984

09-12-2007, 11:32 AM	#4 (permalink)
MR2TRD1 pimpin' valet ;-) Join Date: Feb 2005 Location: Atlanta Posts: 1,912 Thanks: 1 Thanked 31 Times in 28 Posts iTrader Rating: (12/100% )	talk about slammed!!!!!

09-12-2007, 12:11 PM	#5 (permalink)
iOnic No Skills Join Date: Sep 2007 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	suspension can still go lower exhaust is 40mm from the road at its lowest point though so yeah... here's a coupla pics i've just taken. this car isn't all bling and shiny like other cars but it does the job and does it well as many unsuspecting lancer evo/impreza sti owners have come to find thanks for the welcome and comments very friendly community here you sort of get an idea of how low it is. sorry for bad lighting but this is the exhaust and the white is the floor engine bay intercooler piping 3sgte gen III brakes SSA 17" wheels wheel arch clearance need wheel spacers/wider rims rear quarter boost gauge hks drift edition shiftknob momo steering wheel

09-12-2007, 01:52 PM	#6 (permalink)
Ben The Fastest MR2 in Reno Join Date: Aug 2006 Location: Oceanside, CA / Reno, NV Posts: 3,402 Thanks: 18 Thanked 239 Times in 226 Posts My Google Map iTrader Rating: (10/100% )	Can you see the boost gauge? It looks like the steering wheel is blocking it?

09-12-2007, 02:08 PM	#7 (permalink)
iOnic No Skills Join Date: Sep 2007 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	unfortunately no i can't see the boost gauge while driving. the previous owner placed it in a position that is impossible to see while driving the car. i'll be moving it to an 'a pillar' gauge pod sooner or later but have to find a spare dash part to replace the one that is currently holding the boost gauge as it will have a hole in it