hey whats up guys just some info about me

Its Turbo Time · 11-13-2005, 01:29 PM

hey, I just found this board the other day, (same user name from the other board) my name is Anthony I am from NJ, I Am currently going to school for Manufacturing Engeneering, I am a co-owner of XVRacing Fabrications, and a memeber of the XVRacing.com team. My project car is a '91 NA w/gen 3 swap, I also own a stock '92 t which is soon to be ct20b powered.. the body of my '91 is in the proccess of being very highly modiffied and painted if you would like to see it check out my post in the show off section titled "hey guys Pre Paint pics of my 2"
My company XVRacing Fabrications is in the process of Creating a few parts for the Mr2 such as intercooler water/alcohol sprayer kits, custom vented side engine lid panels, custom vented engine lids, Flushmount headlight kits, aftermarket guage cluster templates, and much much more....
thanks for checking out my post if you would like to get more info go to XVRacing.com (will be updated soon) thanx- anthony

canadam · 11-13-2005, 01:41 PM

Wicked ! How'd you find us ?

Mister-Twoster · 11-13-2005, 03:04 PM

Dang sounds sexy! I need a gauge pod

Its Turbo Time · 11-13-2005, 03:41 PM

haha, I was on the other board and was linked here through someones post

Im glad there is intrest, Me and my partner are both in school now we dont have time to reproduce our products so we are in search for a good company to sub contract them out to re-produce untill we are out of school

deicon86mr2 · 11-14-2005, 05:24 AM

depending on what materials you are using for the originals driving dynamics could possibly take it on, we are in denver colorado. web site www.dynamic-driving.com at this site is just some of or work alot of its not up on the pics page yet due to a slacker it guy. lol wish hed just let me take it over ive got 10 years back ground in comps 3 in web design. but thats beside the point, my brother owns DD and there is a contact section shoot him an email tell him gary said to inquired as to sub. and see if hes up to it. Thanks

tigerpee · 11-14-2005, 11:07 AM

hello and welcome!

Its Turbo Time · 11-14-2005, 12:22 PM

deicon86mr2: thanx alsot Ill deff do that

deicon86mr2 · 11-14-2005, 01:00 PM

sorry had a mild typo im Gary by the way i edited the post to say what it was supposed to lol

turboguy · 11-15-2005, 05:51 PM

Welcome!

What do you mean by aftermarket gauge cluster templates? I've been thinking about a way to get rid of the factory cluster for just tach, speedo, gas, and temp.

Its Turbo Time · 11-15-2005, 10:11 PM

Quote:

Originally Posted by turboguy

Welcome!

What do you mean by aftermarket gauge cluster templates? I've been thinking about a way to get rid of the factory cluster for just tach, speedo, gas, and temp.

I may make a few models, the first one would have a large tach in the middle, medium sized boost and spedo on each side, then smaller gauges for gas, temp, oil and bat, next model would have fewer slots and would allow all gauges to be larger, I am probably going to sell them w/o the gauges so you can pick your own combo.

deicon86mr2 · 11-20-2005, 04:44 AM

I talked to my brother about the sub contract idea he says it sounds good here is the shop number in denver his name is Brian 1(303)286-9527. he said to have you give him a call so you can get set up when your ready. Thanks hope to hear from you soon. Gary

11-13-2005, 01:29 PM	#1 (permalink)
Its Turbo Time XVRacing Join Date: Nov 2005 Location: Jersey Posts: 346 Thanks: 3 Thanked 6 Times in 6 Posts iTrader Rating: (2/100% )	hey whats up guys just some info about me hey, I just found this board the other day, (same user name from the other board) my name is Anthony I am from NJ, I Am currently going to school for Manufacturing Engeneering, I am a co-owner of XVRacing Fabrications, and a memeber of the XVRacing.com team. My project car is a '91 NA w/gen 3 swap, I also own a stock '92 t which is soon to be ct20b powered.. the body of my '91 is in the proccess of being very highly modiffied and painted if you would like to see it check out my post in the show off section titled "hey guys Pre Paint pics of my 2" My company XVRacing Fabrications is in the process of Creating a few parts for the Mr2 such as intercooler water/alcohol sprayer kits, custom vented side engine lid panels, custom vented engine lids, Flushmount headlight kits, aftermarket guage cluster templates, and much much more.... thanks for checking out my post if you would like to get more info go to XVRacing.com (will be updated soon) thanx- anthony

11-13-2005, 01:41 PM	#2 (permalink)
canadam MidshipExpress Join Date: Feb 2005 Location: Beautiful British Columbia Posts: 9,319 Thanks: 111 Thanked 121 Times in 107 Posts My Google Map iTrader Rating: (28/100% )	Wicked ! How'd you find us ? __________________

11-14-2005, 05:24 AM	#5 (permalink)
deicon86mr2 Auto Body Specialist Join Date: Nov 2005 Location: Thornton Colorado Posts: 24 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	depending on what materials you are using for the originals driving dynamics could possibly take it on, we are in denver colorado. web site www.dynamic-driving.com at this site is just some of or work alot of its not up on the pics page yet due to a slacker it guy. lol wish hed just let me take it over ive got 10 years back ground in comps 3 in web design. but thats beside the point, my brother owns DD and there is a contact section shoot him an email tell him gary said to inquired as to sub. and see if hes up to it. Thanks Last edited by deicon86mr2; 11-14-2005 at 12:59 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-13-2005, 03:04 PM	#3 (permalink)
Mister-Twoster shhwWAAAAA PSSHHHHHhhh Join Date: Oct 2005 Location: Carmel, IN Posts: 359 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Dang sounds sexy! I need a gauge pod

11-13-2005, 03:41 PM	#4 (permalink)
Its Turbo Time XVRacing Join Date: Nov 2005 Location: Jersey Posts: 346 Thanks: 3 Thanked 6 Times in 6 Posts iTrader Rating: (2/100% )	haha, I was on the other board and was linked here through someones post Im glad there is intrest, Me and my partner are both in school now we dont have time to reproduce our products so we are in search for a good company to sub contract them out to re-produce untill we are out of school

11-14-2005, 11:07 AM	#6 (permalink)
tigerpee Cage Fighter Join Date: Mar 2005 Posts: 512 Thanks: 7 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	hello and welcome!

11-14-2005, 12:22 PM	#7 (permalink)
Its Turbo Time XVRacing Join Date: Nov 2005 Location: Jersey Posts: 346 Thanks: 3 Thanked 6 Times in 6 Posts iTrader Rating: (2/100% )	deicon86mr2: thanx alsot Ill deff do that

11-14-2005, 01:00 PM	#8 (permalink)
deicon86mr2 Auto Body Specialist Join Date: Nov 2005 Location: Thornton Colorado Posts: 24 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	sorry had a mild typo im Gary by the way i edited the post to say what it was supposed to lol

11-15-2005, 05:51 PM	#9 (permalink)
turboguy Resident Composites Guy Join Date: Oct 2005 Location: Appleton, WI Posts: 877 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (2/100% )	Welcome! What do you mean by aftermarket gauge cluster templates? I've been thinking about a way to get rid of the factory cluster for just tach, speedo, gas, and temp.

11-20-2005, 04:44 AM	#11 (permalink)
deicon86mr2 Auto Body Specialist Join Date: Nov 2005 Location: Thornton Colorado Posts: 24 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I talked to my brother about the sub contract idea he says it sounds good here is the shop number in denver his name is Brian 1(303)286-9527. he said to have you give him a call so you can get set up when your ready. Thanks hope to hear from you soon. Gary