Josh please read

TreyMR2 · 07-17-2007, 10:36 PM

I've been trying to get in contact with you about the tracking # on my gen3 lsd sub shafts and the intermedeit shaft with the hanger bearing. The phone # is down or something. I emailed you so if you could give me the # in here or reply to my email. I had it ordered on July 3rd and I really am starting to need it, I just want to see where it is.

TreyMR2 · 07-18-2007, 02:52 AM

If there is no tracking # some time this week and no GOOD excuse for why I would just like my money back from both orders because I gave you $370 2 weeks ago and $310 about a week ago and not so much as a tracking #. It was said to have been shipped my first order 3-4 days from when I ordered it by you, but now you said it shipped last friday. If you don't have the part or can't order it just tell me cause I have all readly been though one BS company(osakaJDMmotors.com) and I really dont want to go through another.

TreyMR2 · 07-18-2007, 02:57 AM

Also I'm sorry if you really do have a good reason its just I'm very short on money so you can understand me being a little worryed on it taking so long.

driftmonster · 07-18-2007, 04:03 AM

Last i heard his computer was crappy, And hes very busy.
AFAIK he always comes through

You are impatient just like me

Dont worry he will come through.

TreyMR2 · 07-18-2007, 04:59 AM

Ok well thats good to hear, I'm just really new at ordering things online so it like to hear that other people have had good experiance with chicoraceworks. I really really need the parts I ordered and he is the ONLY person I have found that has them. Again sorry josh I guess I'm just a little impatient so please get back to me on the tracking # as soon as you can.

driftmonster · 07-18-2007, 05:53 AM

I have never first hand delt with chico race works, but it seems that they are always swamped and their technical end is always behind the times. In the end i have always heard of them taking care of buisness, and i follow up on things like this

I like to put internet jackers on blast. Never seen a thread where product wasnt delivered, maybe late but always great

Like I said you are impatient like me, it will work out have faith brother.

driftmonster · 07-18-2007, 05:56 AM

fathorse got all pissed at me for mentioning that people hadnt recieved their parts, but whatever i would expect the same from a car enthusiast of any kind, if someones a dirt bag....everone should be aware, and thus far chico raceworks are nothing but overworked pornstars with to little time and crappy computer access

.

Weasy2k · 07-18-2007, 01:24 PM

Quote:

Originally Posted by driftmonster

thus far chico raceworks are nothing but overworked pornstars with to little time and crappy computer access

.

You sure you havent met josh?

Hahaha thats awesome....

I agree tho hes a good guy and i know how it feels to try to handle almost everything.

driftmonster · 07-18-2007, 01:31 PM

nope,
I have just seen alot of threads (I chickenhawk bad sellers) Where his computer system is lame and guy's get impatient. He Always follows up.
Maybe MR2Board should chip in and A. treat him to some computer tech courses

Or B. Chip in on a pimp ass new pc for the guy.

Weasy2k · 07-18-2007, 01:44 PM

he has 2...they seem to talk to each other and fail...he got them up and running when i was there looks like the same fault occured....

oh i know...

Josh...

Its cali....

thats it!

Get out of Cali!

driftmonster · 07-18-2007, 01:47 PM

TreyMR2 · 07-18-2007, 02:46 PM

That makes me feel better that its just he's really busy with a crap computer. As long as he is trying as much as posable to get my parts shipped in a desent time its ok. Like I said I just got out of dealing with a very crapy and rude company called osakajdmmotors. They sound pretty good before you order the motor but the sec you get it and have a problem with the a missing or wrong part. They promissed a uncut harness, the ecu, and all sensors. I got a harness cut before the fuse box, a gen2 ecu instead of gen3 and no map sensor. They had a million excusses why it was suppoused to be like that. I know most of the time when you get a motor and trany your harness is cut unless its a clip but they said it wasn't. Then they said I had to pay to ship it back. The motor and trany are in great shape, probley the cleanest gen3 I have seen stock, but it has taking a while to recover money wise cause now I still needed about $750 in parts that I didn't expect to need. I'm only 17 so this is a rediculous about of money to just have wasted. The price to ship the motor back and get a diff companys shipped was about the same so I just desided to keep it.

Weasy2k · 07-18-2007, 02:53 PM

wow thats a first i have heard something negative from osaka...good to hear tho as i will no longer recommend them.

TreyMR2 · 07-18-2007, 09:13 PM

Its not exactly negative its just you have to really know what all they are sending you and what all they are not sending you. Their definition and a few other companys of a uncut harness is cut at the fuse box and they are a little difficult to get things like sending me a gen2 ecu instead of a gen3 sorted out. The motor and trany are unbelievably clean. Most of the sensors are there just the map was one I really would have rather had with the motor instead of trying to find someone that sells it. I would recamend them only if you know that you do need to buy about $1000 or $1250 of stuff to make it work.

mister3 · 07-18-2007, 11:39 PM

Trey.... tried to post earlier but my internet was acting screwy.... will get you track info tomorrow for all of it

TreyMR2 · 07-19-2007, 12:12 AM

Thank you I really didn't want to cancal the orders cause I really need the parts. Sorry I got impationt but the car needs to be runing by the first week in august for school and work. Just post the tracking # in this form or in a pm when ever you can.

mister3 · 07-19-2007, 01:18 AM

no prob.... will do

Weasy2k · 07-19-2007, 02:48 AM

^ woot yer back buddy!

07-17-2007, 10:36 PM	#1 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 1,842 Thanks: 22 Thanked 44 Times in 42 Posts iTrader Rating: (5/100% )	Josh please read I've been trying to get in contact with you about the tracking # on my gen3 lsd sub shafts and the intermedeit shaft with the hanger bearing. The phone # is down or something. I emailed you so if you could give me the # in here or reply to my email. I had it ordered on July 3rd and I really am starting to need it, I just want to see where it is.

07-18-2007, 02:52 AM	#2 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 1,842 Thanks: 22 Thanked 44 Times in 42 Posts iTrader Rating: (5/100% )	If there is no tracking # some time this week and no GOOD excuse for why I would just like my money back from both orders because I gave you $370 2 weeks ago and $310 about a week ago and not so much as a tracking #. It was said to have been shipped my first order 3-4 days from when I ordered it by you, but now you said it shipped last friday. If you don't have the part or can't order it just tell me cause I have all readly been though one BS company(osakaJDMmotors.com) and I really dont want to go through another.

07-18-2007, 02:57 AM	#3 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 1,842 Thanks: 22 Thanked 44 Times in 42 Posts iTrader Rating: (5/100% )	Also I'm sorry if you really do have a good reason its just I'm very short on money so you can understand me being a little worryed on it taking so long.

07-18-2007, 04:03 AM	#4 (permalink)
driftmonster The World Is Mine. Join Date: May 2007 Location: City Of Roses Posts: 833 Thanks: 57 Thanked 26 Times in 25 Posts iTrader Rating: (0/0% )	Last i heard his computer was crappy, And hes very busy. AFAIK he always comes through You are impatient just like me Dont worry he will come through.

07-18-2007, 04:59 AM	#5 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 1,842 Thanks: 22 Thanked 44 Times in 42 Posts iTrader Rating: (5/100% )	Ok well thats good to hear, I'm just really new at ordering things online so it like to hear that other people have had good experiance with chicoraceworks. I really really need the parts I ordered and he is the ONLY person I have found that has them. Again sorry josh I guess I'm just a little impatient so please get back to me on the tracking # as soon as you can.

07-18-2007, 05:53 AM	#6 (permalink)
driftmonster The World Is Mine. Join Date: May 2007 Location: City Of Roses Posts: 833 Thanks: 57 Thanked 26 Times in 25 Posts iTrader Rating: (0/0% )	I have never first hand delt with chico race works, but it seems that they are always swamped and their technical end is always behind the times. In the end i have always heard of them taking care of buisness, and i follow up on things like this I like to put internet jackers on blast. Never seen a thread where product wasnt delivered, maybe late but always great Like I said you are impatient like me, it will work out have faith brother.

07-18-2007, 05:56 AM	#7 (permalink)
driftmonster The World Is Mine. Join Date: May 2007 Location: City Of Roses Posts: 833 Thanks: 57 Thanked 26 Times in 25 Posts iTrader Rating: (0/0% )	fathorse got all pissed at me for mentioning that people hadnt recieved their parts, but whatever i would expect the same from a car enthusiast of any kind, if someones a dirt bag....everone should be aware, and thus far chico raceworks are nothing but overworked pornstars with to little time and crappy computer access .

07-18-2007, 01:31 PM	#9 (permalink)
driftmonster The World Is Mine. Join Date: May 2007 Location: City Of Roses Posts: 833 Thanks: 57 Thanked 26 Times in 25 Posts iTrader Rating: (0/0% )	nope, I have just seen alot of threads (I chickenhawk bad sellers) Where his computer system is lame and guy's get impatient. He Always follows up. Maybe MR2Board should chip in and A. treat him to some computer tech courses Or B. Chip in on a pimp ass new pc for the guy.

07-18-2007, 01:44 PM	#10 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,885 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	he has 2...they seem to talk to each other and fail...he got them up and running when i was there looks like the same fault occured.... oh i know... Josh... Its cali.... thats it! Get out of Cali!

07-18-2007, 01:47 PM	#11 (permalink)
driftmonster The World Is Mine. Join Date: May 2007 Location: City Of Roses Posts: 833 Thanks: 57 Thanked 26 Times in 25 Posts iTrader Rating: (0/0% )

07-18-2007, 02:46 PM	#12 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 1,842 Thanks: 22 Thanked 44 Times in 42 Posts iTrader Rating: (5/100% )	That makes me feel better that its just he's really busy with a crap computer. As long as he is trying as much as posable to get my parts shipped in a desent time its ok. Like I said I just got out of dealing with a very crapy and rude company called osakajdmmotors. They sound pretty good before you order the motor but the sec you get it and have a problem with the a missing or wrong part. They promissed a uncut harness, the ecu, and all sensors. I got a harness cut before the fuse box, a gen2 ecu instead of gen3 and no map sensor. They had a million excusses why it was suppoused to be like that. I know most of the time when you get a motor and trany your harness is cut unless its a clip but they said it wasn't. Then they said I had to pay to ship it back. The motor and trany are in great shape, probley the cleanest gen3 I have seen stock, but it has taking a while to recover money wise cause now I still needed about $750 in parts that I didn't expect to need. I'm only 17 so this is a rediculous about of money to just have wasted. The price to ship the motor back and get a diff companys shipped was about the same so I just desided to keep it.

07-18-2007, 02:53 PM	#13 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,885 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	wow thats a first i have heard something negative from osaka...good to hear tho as i will no longer recommend them.

07-18-2007, 09:13 PM	#14 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 1,842 Thanks: 22 Thanked 44 Times in 42 Posts iTrader Rating: (5/100% )	Its not exactly negative its just you have to really know what all they are sending you and what all they are not sending you. Their definition and a few other companys of a uncut harness is cut at the fuse box and they are a little difficult to get things like sending me a gen2 ecu instead of a gen3 sorted out. The motor and trany are unbelievably clean. Most of the sensors are there just the map was one I really would have rather had with the motor instead of trying to find someone that sells it. I would recamend them only if you know that you do need to buy about $1000 or $1250 of stuff to make it work.

07-18-2007, 11:39 PM	#15 (permalink)
mister3 garageCRW Join Date: Feb 2005 Location: www.garageCRW.com Posts: 429 Thanks: 0 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (7/100% )	Trey.... tried to post earlier but my internet was acting screwy.... will get you track info tomorrow for all of it

07-19-2007, 12:12 AM	#16 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 1,842 Thanks: 22 Thanked 44 Times in 42 Posts iTrader Rating: (5/100% )	Thank you I really didn't want to cancal the orders cause I really need the parts. Sorry I got impationt but the car needs to be runing by the first week in august for school and work. Just post the tracking # in this form or in a pm when ever you can.

07-19-2007, 01:18 AM	#17 (permalink)
mister3 garageCRW Join Date: Feb 2005 Location: www.garageCRW.com Posts: 429 Thanks: 0 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (7/100% )	no prob.... will do

07-19-2007, 02:48 AM	#18 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,885 Thanks: 34 Thanked 76 Times in 65 Posts iTrader Rating: (6/100% )	^ woot yer back buddy!

07-19-2007, 03:03 AM	#19 (permalink)
mister3 garageCRW Join Date: Feb 2005 Location: www.garageCRW.com Posts: 429 Thanks: 0 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (7/100% )