WTB: GenIII Coolant Neck

AnDaLe · 11-17-2007, 04:33 PM

Do you have one Josh?

Also, is the ST205 alternator different than the GenIII MR2 alternator? I have an ST205 clip and am figuring stuff I need and don't need.

Shipping will be to 98388. Thanks!

AnDaLe · 11-17-2007, 07:56 PM

I need a Gen3 throttle body inlet also I believe. Please let me know what you have and what I need.

mister3 · 11-19-2007, 06:04 PM

the gen3 alternator is different location that the ST205. it goes where the P/S pump goes on the ST.

water neck is different also and the t/b inlet.... i'll have to check and see if i have either of those items.... do have the alternator mounting bracket for the back of the block....

AnDaLe · 11-19-2007, 09:39 PM

Do you know if the Gen3 alternator is the same as the ST205? I heard that the throttle body inlet can be used for the MR2 setup, except that it'd be rubber instead of metal like the SW20.

mister3 · 11-19-2007, 10:21 PM

Quote:

Originally Posted by AnDaLe

Do you know if the Gen3 alternator is the same as the ST205? I heard that the throttle body inlet can be used for the MR2 setup, except that it'd be rubber instead of metal like the SW20.

the alternators are the same from SW20 to ST205... just mounted differently is all.

could figure out how to use the ST205 inlet also... maybe get a piece of muffler pipe bent so it'll go inside the rubber ST205 inlet and mate to the stock MR2 intercooler.

11-17-2007, 04:33 PM	#1 (permalink)
AnDaLe No Skills Join Date: Sep 2006 Posts: 112 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	WTB: GenIII Coolant Neck Do you have one Josh? Also, is the ST205 alternator different than the GenIII MR2 alternator? I have an ST205 clip and am figuring stuff I need and don't need. Shipping will be to 98388. Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-17-2007, 07:56 PM	#2 (permalink)
AnDaLe No Skills Join Date: Sep 2006 Posts: 112 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	I need a Gen3 throttle body inlet also I believe. Please let me know what you have and what I need.

11-19-2007, 06:04 PM	#3 (permalink)
mister3 garageCRW Join Date: Feb 2005 Location: www.garageCRW.com Posts: 624 Thanks: 0 Thanked 13 Times in 13 Posts My Google Map iTrader Rating: (8/100% )	the gen3 alternator is different location that the ST205. it goes where the P/S pump goes on the ST. water neck is different also and the t/b inlet.... i'll have to check and see if i have either of those items.... do have the alternator mounting bracket for the back of the block....

11-19-2007, 09:39 PM	#4 (permalink)
AnDaLe No Skills Join Date: Sep 2006 Posts: 112 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	Do you know if the Gen3 alternator is the same as the ST205? I heard that the throttle body inlet can be used for the MR2 setup, except that it'd be rubber instead of metal like the SW20.