Finally ran the racecar

HarrisRacing · 04-21-2009, 08:52 AM

I ran my 1991 Road race MR2 turbo w/ gen3 conversion after a lapping day the other day (our track is 2 mile road race AND drag race track). I didn't change ANYTHING from my road race setup, just to see what the car could do. I also ran on corded Hoosier 245 road race slicks and managed a 12.1 @ 110 mph. I was SUPER-impressed that the car launched as good as it did and I did it on only 15 psi of boost with no tuning on the Power FC.

1.68 60' and I know I could have done better and got in the 11's, but didn't want to bust anything since I had two road races in a row Sat and Sun.

Patrick Harris

PearlJammzz · 04-21-2009, 10:44 AM

What you have done to your motor?

Everett · 04-21-2009, 11:39 AM

Sweet! Good to hear Patrick!

kbrew8991 · 04-21-2009, 12:05 PM

thats quick

HarrisRacing · 04-21-2009, 12:33 PM

Forged Wiseco Pistons
ARP headstuds
ATS racing valvesprings (because I plan to do cams later)
Megan Downpipe
2.5" exhaust (really short homemade crap)
Ebay sidemount
Stock CT20B
Airfilter
PowerFC

Patrick

04-21-2009, 08:52 AM	#1 (permalink)
HarrisRacing Cage Fighter Join Date: Jun 2007 Location: Lafayette, La Posts: 214 Thanks: 13 Thanked 16 Times in 7 Posts My Google Map iTrader Rating: (0/0% )	Finally ran the racecar I ran my 1991 Road race MR2 turbo w/ gen3 conversion after a lapping day the other day (our track is 2 mile road race AND drag race track). I didn't change ANYTHING from my road race setup, just to see what the car could do. I also ran on corded Hoosier 245 road race slicks and managed a 12.1 @ 110 mph. I was SUPER-impressed that the car launched as good as it did and I did it on only 15 psi of boost with no tuning on the Power FC. 1.68 60' and I know I could have done better and got in the 11's, but didn't want to bust anything since I had two road races in a row Sat and Sun. Patrick Harris

04-21-2009, 12:33 PM	#5 (permalink)
HarrisRacing Cage Fighter Join Date: Jun 2007 Location: Lafayette, La Posts: 214 Thanks: 13 Thanked 16 Times in 7 Posts My Google Map iTrader Rating: (0/0% )	Mods Forged Wiseco Pistons ARP headstuds ATS racing valvesprings (because I plan to do cams later) Megan Downpipe 2.5" exhaust (really short homemade crap) Ebay sidemount Stock CT20B Airfilter PowerFC Patrick

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-21-2009, 10:44 AM	#2 (permalink)
PearlJammzz Cage Fighter Join Date: Feb 2006 Posts: 2,115 Thanks: 9 Thanked 74 Times in 69 Posts My Google Map iTrader Rating: (7/100% )	What you have done to your motor?

04-21-2009, 11:39 AM	#3 (permalink)
Everett Lovin' the curves! Join Date: Aug 2006 Location: Decatur,IL/Solomons,MD Posts: 1,445 Thanks: 42 Thanked 65 Times in 59 Posts My Google Map iTrader Rating: (7/100% )	Sweet! Good to hear Patrick!

04-21-2009, 12:05 PM	#4 (permalink)
kbrew8991 gimme some turns Join Date: Apr 2006 Location: Houston, TX Posts: 1,685 Thanks: 76 Thanked 82 Times in 70 Posts My Google Map iTrader Rating: (5/100% )	thats quick