Help: Where to mount my Fuel Pressure Regulator?

Everett · 07-29-2007, 10:19 PM

I have a 91 5S which I'm doing somw work to and I have a Sard FPR and I need some tips on where to mount it, how it works and I'm sure I'll need to put a guage on it, eh? Any help would be Grrrrreat!!

Sang · 07-30-2007, 04:37 AM

You can easily mount it on the firewall/trunk side.

Everett · 07-30-2007, 11:11 AM

Ok, But where do I tap into the fuel line, going to the rail, or the other end?

Everett · 08-01-2007, 06:35 PM

I know there is someone with a FPR on a MR2, I just need to know the jist of how it works because Ive heard diffrent stories on how it opperates. I mainly need to know where to tap into the fuel line. ANY help would be much apprecaited!!!

Sang · 08-01-2007, 07:08 PM

Tap into what fuel line? You should take the regulator off the rail. Place a 90* Metric->AN adapter in place of the regulator, then run the correct lines and fittings to your regulator, then from your regulator to the hard return pipe.

Everett · 08-01-2007, 09:24 PM

great, thanks a million!!!

07-29-2007, 10:19 PM	#1 (permalink)
Everett Lovin' the curves! Join Date: Aug 2006 Location: Decatur,IL/Solomons,MD Posts: 1,422 Thanks: 42 Thanked 59 Times in 55 Posts My Google Map iTrader Rating: (7/100% )	Help: Where to mount my Fuel Pressure Regulator? I have a 91 5S which I'm doing somw work to and I have a Sard FPR and I need some tips on where to mount it, how it works and I'm sure I'll need to put a guage on it, eh? Any help would be Grrrrreat!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-30-2007, 04:37 AM	#2 (permalink)
Sang Go Magic! Join Date: Jul 2006 Location: Home: Tampa, FL School: Gainesville, FL Posts: 3,384 Thanks: 19 Thanked 220 Times in 200 Posts iTrader Rating: (5/100% )	You can easily mount it on the firewall/trunk side.

07-30-2007, 11:11 AM	#3 (permalink)
Everett Lovin' the curves! Join Date: Aug 2006 Location: Decatur,IL/Solomons,MD Posts: 1,422 Thanks: 42 Thanked 59 Times in 55 Posts My Google Map iTrader Rating: (7/100% )	Ok, But where do I tap into the fuel line, going to the rail, or the other end?

08-01-2007, 06:35 PM	#4 (permalink)
Everett Lovin' the curves! Join Date: Aug 2006 Location: Decatur,IL/Solomons,MD Posts: 1,422 Thanks: 42 Thanked 59 Times in 55 Posts My Google Map iTrader Rating: (7/100% )	I know there is someone with a FPR on a MR2, I just need to know the jist of how it works because Ive heard diffrent stories on how it opperates. I mainly need to know where to tap into the fuel line. ANY help would be much apprecaited!!!

08-01-2007, 07:08 PM	#5 (permalink)
Sang Go Magic! Join Date: Jul 2006 Location: Home: Tampa, FL School: Gainesville, FL Posts: 3,384 Thanks: 19 Thanked 220 Times in 200 Posts iTrader Rating: (5/100% )	Tap into what fuel line? You should take the regulator off the rail. Place a 90* Metric->AN adapter in place of the regulator, then run the correct lines and fittings to your regulator, then from your regulator to the hard return pipe.

08-01-2007, 09:24 PM	#6 (permalink)
Everett Lovin' the curves! Join Date: Aug 2006 Location: Decatur,IL/Solomons,MD Posts: 1,422 Thanks: 42 Thanked 59 Times in 55 Posts My Google Map iTrader Rating: (7/100% )	great, thanks a million!!!