JAW DIY WBo2 (Just Another Wideband)

MR-3vz · 03-20-2009, 10:27 PM

The sensor was around 50 bux at a local autozone when I bought it... I think the price has went up since the demand has went up for these sensors... I dont know the price now... Look up a sensor for the 2000+ VW golf 1.8T... i think the part number is 17014 at autozone... The only thing is this unit dosnt come with a case so you would have to build ur own case... Ive put together a case for my unit kinda cheaply...

Most of the parts are from Radio Shack, the case I got from a website called Circuit Specialists ( Circuit Specialists, Inc -- Online Catalog or Circuit Specialists - Data Acquisition - Industrial Computers - Fluke Test Equipment - Components & Supplies... ) The LM317 is isolated from the housing using a "mica" pad with a lil heat sink compound on both sides, (be careful not to use a metal mounting screw to the case, and if u do, make sure its isolated.) I got the mica pad from a kit for my DIY ECU (Megasquirt) You might be able to send the guys at DIYAutoTune.com Megasquirt Kits / Assembled Engine Management Systems, Wideband o2 Sensor Systems and tuning products an email to see how much it would cost for some pads or where to source them. Everything else is pretty simple, especially if you have a dremel and time. This took me a few hours to put together.

Gairloch · 03-20-2009, 10:28 PM

This is too cool man!

baktasht · 03-20-2009, 11:40 PM

Very nice setup for the DIY'er

countyboy3188 · 03-21-2009, 12:04 AM

Now that is something cool.

MR-3vz · 03-21-2009, 01:55 AM

Thanks guys, working on putting alot of my work in the sticky sections and also the KB for this site... Finally hooked up with a good member of this board that is going to help me put a lot of my info on the stickys and KB's... I have a v6 Twin Turbo I'm setting up so hopefully I'll get something nice to toss up there... Also thinking of doing Flush mount headlights and Megasquirt and all that good stuff... Stay Tuned...

-J

masagsxr · 03-21-2009, 02:13 AM

Totally awesome man..!!!!

karl · 04-14-2009, 10:13 PM

i bought a JAW a couple weeks after alan released them. they do work pretty well, but the output was slightly jumpy. i believe he's working on a new firmware update that will fix the issue..

good stuff either way!

03-20-2009, 10:27 PM	#1 (permalink)
MR-3vz Finally on the STAND Join Date: Mar 2008 Location: Nashua, NH Posts: 116 Thanks: 2 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	JAW DIY WBo2 (Just Another Wideband) The sensor was around 50 bux at a local autozone when I bought it... I think the price has went up since the demand has went up for these sensors... I dont know the price now... Look up a sensor for the 2000+ VW golf 1.8T... i think the part number is 17014 at autozone... The only thing is this unit dosnt come with a case so you would have to build ur own case... Ive put together a case for my unit kinda cheaply... Most of the parts are from Radio Shack, the case I got from a website called Circuit Specialists ( Circuit Specialists, Inc -- Online Catalog or Circuit Specialists - Data Acquisition - Industrial Computers - Fluke Test Equipment - Components & Supplies... ) The LM317 is isolated from the housing using a "mica" pad with a lil heat sink compound on both sides, (be careful not to use a metal mounting screw to the case, and if u do, make sure its isolated.) I got the mica pad from a kit for my DIY ECU (Megasquirt) You might be able to send the guys at DIYAutoTune.com Megasquirt Kits / Assembled Engine Management Systems, Wideband o2 Sensor Systems and tuning products an email to see how much it would cost for some pads or where to source them. Everything else is pretty simple, especially if you have a dremel and time. This took me a few hours to put together.

03-20-2009, 10:28 PM	#2 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,848 Thanks: 125 Thanked 258 Times in 228 Posts My Google Map iTrader Rating: (7/100% )	This is too cool man! __________________ "Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-20-2009, 11:40 PM	#3 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,578 Thanks: 19 Thanked 130 Times in 115 Posts My Google Map iTrader Rating: (41/98% )	Very nice setup for the DIY'er

03-21-2009, 12:04 AM	#4 (permalink)
countyboy3188 3s-gte swap under way!! Join Date: May 2007 Location: Buchanan,GA Posts: 467 Thanks: 14 Thanked 6 Times in 6 Posts My Google Map iTrader Rating: (6/100% )	Now that is something cool.

03-21-2009, 01:55 AM	#5 (permalink)
MR-3vz Finally on the STAND Join Date: Mar 2008 Location: Nashua, NH Posts: 116 Thanks: 2 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	Thanks guys, working on putting alot of my work in the sticky sections and also the KB for this site... Finally hooked up with a good member of this board that is going to help me put a lot of my info on the stickys and KB's... I have a v6 Twin Turbo I'm setting up so hopefully I'll get something nice to toss up there... Also thinking of doing Flush mount headlights and Megasquirt and all that good stuff... Stay Tuned... -J

03-21-2009, 02:13 AM	#6 (permalink)
masagsxr Cage Fighter Join Date: Sep 2008 Location: Norwalk, CA Posts: 3,181 Thanks: 1 Thanked 76 Times in 76 Posts iTrader Rating: (1/100% )	Totally awesome man..!!!!

04-14-2009, 10:13 PM	#7 (permalink)
karl all macgyver on it Join Date: May 2006 Location: robbinsdale, MN Posts: 296 Thanks: 1 Thanked 30 Times in 23 Posts iTrader Rating: (0/0% )	i bought a JAW a couple weeks after alan released them. they do work pretty well, but the output was slightly jumpy. i believe he's working on a new firmware update that will fix the issue.. good stuff either way!