Group Buy - Intake Leak Tester

baktasht · 06-28-2007, 07:57 PM

These were on backorder for a while. I have another batch of them in. There are 15 in stock and ready to ship.

These are used to connect to your turbo inlet, or to your intake piping to test for boost/vacuum leaks.

Use this Intake Leak Pressure Tester to make sure you get 100% performance from your turbo. Intake leaks can overwork or even destroy a turbo and cause a rich or lean condition in the engine. To eliminate your intake leaks, simply attach this Intake Leak Pressure Tester to your turbo inlet or intake piping and apply compressed air through the standard valve stem. You can listen for air leaks or spray soapy water in suspect areas - the soap will bubble if there is a leak.

Machined from silver-anodized aluminum, these pressure testers are the highest quality tool available. Since they utilize a 3-ply silicone reducer and high quality stainless steel t-bolt clamps, you can pressure test your intake to very high pressure levels. Every Intake Leak Pressure Tester utilizes a 2.5" tester cap and a reducer to fit your turbo inlet size, so if you need to pressure test multiple turbos with different inlet sizes, you can just buy additional reducers. Product includes everything shown and comes fully assembled.

Please make sure to order the proper size for your turbo inlet if you plan on connecting this to your turbo, otherwise make sure you get the proper size for your intake piping diameter.

* CT26/CT27/CT20b turbo has a 2.75" inlet
* Most t3/t4 turbos (and most others) have a 3" inlet
* Most GT30/GT35 turbo's have a 4" inlet

These normally sell for $42 + shipping on the EMSPowered online store.

This group buy pricing is for $35 + shipping.
Shipping within the US is $5
If you are outside of the US let me know and I will get you shipping costs.

baktasht · 06-28-2007, 07:57 PM

Payments through paypal will go to admin@emspowered.com. Please make sure to list the following in your payment:

* Board screenname
* Full name and shipping address
* Telephone number
* The exact item you are paying for (in the case of this thread, please make sure you list the size of the silicone reducer that you need; i.e. 2.75", 3", etc...)

Hellstorm · 06-28-2007, 08:40 PM

Payment sent....but i wasnt sure on the size i need.... What size is for the gen3 intake?

Hellstorm · 06-28-2007, 08:41 PM

I have the stock CT26 but im wanting to hook it up to my intake not the turbo.

baktasht · 06-28-2007, 09:07 PM

Quote:

Originally Posted by Hellstorm

I have the stock CT26 but im wanting to hook it up to my intake not the turbo.

Which part of your intake do you want to hook it up to? Your throttle body? The hotpipe? etc...?

baktasht · 06-29-2007, 09:13 PM

Hellstorm, Please contact me on here or by email baktasht@gmail.com I need to know what size you need in order to mail one out for you.

Everyone else, ONLY 4 LEFT on this round!!!

Hellstorm · 06-30-2007, 10:09 PM

The Hot pipe will work fine. Anything else?

baktasht · 06-30-2007, 10:53 PM

Quote:

Originally Posted by Hellstorm

The Hot pipe will work fine. Anything else?

Nope, that's it. It'll be shipped monday.

Anyone else, just 4 left!

baktasht · 07-03-2007, 08:03 AM

Hellstorm, my local warehouse didn't have the required 2.5"-2" reducer so it had to be ordered from the CA warehouse. It should be ship to you on Thursday and reach you on Saturday or Monday

Hellstorm · 07-09-2007, 08:49 PM

Gotcha....thx

06-28-2007, 07:57 PM	#1 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,660 Thanks: 19 Thanked 133 Times in 118 Posts My Google Map iTrader Rating: (41/98% )	Group Buy - Intake Leak Tester These were on backorder for a while. I have another batch of them in. There are 15 in stock and ready to ship. These are used to connect to your turbo inlet, or to your intake piping to test for boost/vacuum leaks. Use this Intake Leak Pressure Tester to make sure you get 100% performance from your turbo. Intake leaks can overwork or even destroy a turbo and cause a rich or lean condition in the engine. To eliminate your intake leaks, simply attach this Intake Leak Pressure Tester to your turbo inlet or intake piping and apply compressed air through the standard valve stem. You can listen for air leaks or spray soapy water in suspect areas - the soap will bubble if there is a leak. Machined from silver-anodized aluminum, these pressure testers are the highest quality tool available. Since they utilize a 3-ply silicone reducer and high quality stainless steel t-bolt clamps, you can pressure test your intake to very high pressure levels. Every Intake Leak Pressure Tester utilizes a 2.5" tester cap and a reducer to fit your turbo inlet size, so if you need to pressure test multiple turbos with different inlet sizes, you can just buy additional reducers. Product includes everything shown and comes fully assembled. Please make sure to order the proper size for your turbo inlet if you plan on connecting this to your turbo, otherwise make sure you get the proper size for your intake piping diameter. * CT26/CT27/CT20b turbo has a 2.75" inlet * Most t3/t4 turbos (and most others) have a 3" inlet * Most GT30/GT35 turbo's have a 4" inlet These normally sell for $42 + shipping on the EMSPowered online store. This group buy pricing is for $35 + shipping. Shipping within the US is $5 If you are outside of the US let me know and I will get you shipping costs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-28-2007, 07:57 PM	#2 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,660 Thanks: 19 Thanked 133 Times in 118 Posts My Google Map iTrader Rating: (41/98% )	Payments through paypal will go to admin@emspowered.com. Please make sure to list the following in your payment: * Board screenname * Full name and shipping address * Telephone number * The exact item you are paying for (in the case of this thread, please make sure you list the size of the silicone reducer that you need; i.e. 2.75", 3", etc...)

06-28-2007, 08:40 PM	#3 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	Payment sent....but i wasnt sure on the size i need.... What size is for the gen3 intake?

06-28-2007, 08:41 PM	#4 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	I have the stock CT26 but im wanting to hook it up to my intake not the turbo.

06-29-2007, 09:13 PM	#6 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,660 Thanks: 19 Thanked 133 Times in 118 Posts My Google Map iTrader Rating: (41/98% )	Hellstorm, Please contact me on here or by email baktasht@gmail.com I need to know what size you need in order to mail one out for you. Everyone else, ONLY 4 LEFT on this round!!!

06-30-2007, 10:09 PM	#7 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	The Hot pipe will work fine. Anything else?

07-03-2007, 08:03 AM	#9 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,660 Thanks: 19 Thanked 133 Times in 118 Posts My Google Map iTrader Rating: (41/98% )	Hellstorm, my local warehouse didn't have the required 2.5"-2" reducer so it had to be ordered from the CA warehouse. It should be ship to you on Thursday and reach you on Saturday or Monday

07-09-2007, 08:49 PM	#10 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	Gotcha....thx