EMSPowered Intercooler GB Pricing

baktasht · 07-23-2007, 02:38 PM

This time around we're doing special pricing on A2A intercoolers. This is the size that people typically use for LARGE trunk mounted intercooler setups for MR2's. There are three sizes/configurations available so please pay particular attention to which one you're ordering

This pricing will be good from now until August 6th.

31"x11.75"x3" - 2.5" Inlet/Outlet - $175

31"x11.75"x3" - 3" Inlet/Outlet - $175

31"x11.75"x4" - 3" Inlet/Outlet - $265

Shipping within the USA is $25. International shipping to Canada is also available.

Payments will be accepted only through Paypal to admin@emspowered.com. When making payments please include all of the following info:
Board name
What exact item you are paying for
Complete shipping address and a valid phone number

I can also get piping kits for you if you need, please email me for further info on piping baktasht@gmail.com.

baktasht · 07-23-2007, 02:38 PM

Here is more detailed information about these IC's

31"x11.75"x3" - 2.5" Inlet/Outlet
100% Lightweight aluminum - No Epoxy Used In Core
Show quality mirror polished finish
Bar and Plate Internal Fin Design
Fin pitch is 15 fins/inch - 8 external and 7 internal
Recommended for up to 800 CFM
Pressure Drop: Less than 0.35 PSI
Inlet: 2.5" Outlet:2.5"
Core Size: 24"x11.75"x3" (Endtanks add 7" to length)

31"x11.75"x3" - 3" Inlet/Outlet
100% Lightweight aluminum, No Epoxy Used In Core
Show quality, mirror polished finish
Bar and Plate, Internal Fin Design
Fin pitch is 15 fins/inch - 8 external and 7 internal
Recommended for up to 800 CFM
Pressure Drop: Less than 0.35 PSI
Inlet: 3.0" Outlet: 3.0"
Core Size: 24"x11.75"x3" (Endtanks add 7" to length)

31"x11.75"x4" - 3" Inlet/Outlet
100% Lightweight aluminum, No Epoxy Used In Core
Show quality, mirror polished finish
Bar and Plate, Internal Fin Design
Fin pitch is 15 fins/inch - 8 external and 7 internal
Recommended for over 1000 CFM
Pressure Drop: Less than 1 PSI
Inlet: 3.0" Outlet: 3.0"
Core Size: 24"x11.75"x4" (Endtanks add 7" to length)

baktasht · 07-24-2007, 03:24 PM

Responded to all emails. Answers to the emails incase anyone else asks the same thing:

* Yes I can get you stainless 2.5" or 3" piping and couplers and clamps
* Yes these IC's do get pressure tested to 75psi
* Yes you can get the 4" thick IC with 3" outlets and still use 2.5" piping

baktasht · 08-03-2007, 10:13 AM

Everyone who has purchased, your orders have shipped.

This pricing ends on August 6th!! Hurry and get your orders in!

07-23-2007, 02:38 PM	#1 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 3,762 Thanks: 15 Thanked 96 Times in 84 Posts My Google Map iTrader Rating: (25/100% )	EMSPowered Intercooler GB Pricing This time around we're doing special pricing on A2A intercoolers. This is the size that people typically use for LARGE trunk mounted intercooler setups for MR2's. There are three sizes/configurations available so please pay particular attention to which one you're ordering This pricing will be good from now until August 6th. 31"x11.75"x3" - 2.5" Inlet/Outlet - $175 31"x11.75"x3" - 3" Inlet/Outlet - $175 31"x11.75"x4" - 3" Inlet/Outlet - $265 Shipping within the USA is $25. International shipping to Canada is also available. Payments will be accepted only through Paypal to admin@emspowered.com. When making payments please include all of the following info: Board name What exact item you are paying for Complete shipping address and a valid phone number I can also get piping kits for you if you need, please email me for further info on piping baktasht@gmail.com.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-23-2007, 02:38 PM	#2 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 3,762 Thanks: 15 Thanked 96 Times in 84 Posts My Google Map iTrader Rating: (25/100% )	Here is more detailed information about these IC's 31"x11.75"x3" - 2.5" Inlet/Outlet 100% Lightweight aluminum - No Epoxy Used In Core Show quality mirror polished finish Bar and Plate Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7 internal Recommended for up to 800 CFM Pressure Drop: Less than 0.35 PSI Inlet: 2.5" Outlet:2.5" Core Size: 24"x11.75"x3" (Endtanks add 7" to length) 31"x11.75"x3" - 3" Inlet/Outlet 100% Lightweight aluminum, No Epoxy Used In Core Show quality, mirror polished finish Bar and Plate, Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7 internal Recommended for up to 800 CFM Pressure Drop: Less than 0.35 PSI Inlet: 3.0" Outlet: 3.0" Core Size: 24"x11.75"x3" (Endtanks add 7" to length) 31"x11.75"x4" - 3" Inlet/Outlet 100% Lightweight aluminum, No Epoxy Used In Core Show quality, mirror polished finish Bar and Plate, Internal Fin Design Fin pitch is 15 fins/inch - 8 external and 7 internal Recommended for over 1000 CFM Pressure Drop: Less than 1 PSI Inlet: 3.0" Outlet: 3.0" Core Size: 24"x11.75"x4" (Endtanks add 7" to length)

07-24-2007, 03:24 PM	#3 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 3,762 Thanks: 15 Thanked 96 Times in 84 Posts My Google Map iTrader Rating: (25/100% )	Responded to all emails. Answers to the emails incase anyone else asks the same thing: * Yes I can get you stainless 2.5" or 3" piping and couplers and clamps * Yes these IC's do get pressure tested to 75psi * Yes you can get the 4" thick IC with 3" outlets and still use 2.5" piping

08-03-2007, 10:13 AM	#4 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 3,762 Thanks: 15 Thanked 96 Times in 84 Posts My Google Map iTrader Rating: (25/100% )	Everyone who has purchased, your orders have shipped. This pricing ends on August 6th!! Hurry and get your orders in!