Full digital cluster - Page 2

MR2 Drifter · 09-24-2008, 03:12 AM

So for the fuel does it tell you how many miles you got left before you run out (Like 180 MILES TO E) or is it gonna tell you how much fuel you have from 1-100 (1 being E and 100 being full)

Count me in on these as long as there not that expensive

Looks really good btw

baktasht · 09-24-2008, 03:16 AM

the fuel is shown as a percentage. 0% is empty 100% is full.

lsgheero · 09-24-2008, 03:16 AM

I think i asked these already but do these work for a aw11?

baktasht · 09-24-2008, 03:18 AM

Quote:

Originally Posted by lsgheero

I think i asked these already but do these work for a aw11?

Not unless you want to put an SW20 cluster in your AW11

MR2 Drifter · 09-24-2008, 03:22 AM

So when installing this all you will have to do is unplug wires from the gauge cluster and plug them into the digital gauges or do you have to send the wire all the way back to your engine bay and hook them up there?

and do you have an estimated price for these beautys???

baktasht · 09-24-2008, 03:24 AM

The fuel level unit will use the stock fuel level sender/sensor. So you'll need to splice into the wire for that.

The rest of the gauges have their own sensors that we include which you will need to appropriately install in the engine bay.

Price will be announced tomorrow when I post the group buy

PearlJammzz · 09-26-2008, 12:14 AM

I am assuming you can switch the gauges to the other sides? I'd rather have oil temp and such on left and fuel/water on right

Dance_Business · 09-26-2008, 12:47 AM

Quote:

Originally Posted by PearlJammzz

I am assuming you can switch the gauges to the other sides? I'd rather have oil temp and such on left and fuel/water on right

Great question.

miracleman89 · 09-26-2008, 01:35 AM

Ok this is probably the dumbest question asked yet so, forgive me, I am still trying to learn about the MR2s.

1.) Will this work in a 5SFE?
2.) It said fully digital, so you are planning to make the speedo and RPM gauge digital as well? the pic i saw didn't show them as digital that is why I am asking.

Thanks!

mr2boost · 09-26-2008, 07:47 PM

Your killing me baktasht. Those really look GOOD! Thanks, thanks a lot.

I been wanting your SMIC kit, 3" DP, 3" SS Exhaust & now you are putting this stuff out. I already LOVE that boost gauge & you KNEW I would like this. Oh well, our friend Benji (Dance Business) will buy you out for sure.

MAN you are killing my wallet. I won't be able to save nothing now. So much for the light weight wheels & stickier tires. NO! I will stick to that next, then your IC & exhaust pieces AND then the gauges. But, I am WANTING those gauges now. "Triple DIN kit too!"

ARRRRRGGGGGGGGGG!

Seriously, looks GREAT, I am very impressed! IF you need any more testing, just shoot me an e-mail or PM again, hmmmmmm.

Daniel

baktasht · 09-26-2008, 07:58 PM

Quote:

Originally Posted by miracleman89

Ok this is probably the dumbest question asked yet so, forgive me, I am still trying to learn about the MR2s.

1.) Will this work in a 5SFE?
2.) It said fully digital, so you are planning to make the speedo and RPM gauge digital as well? the pic i saw didn't show them as digital that is why I am asking.

Thanks!

Yes, it will work with ANY motor. This is not motor specific. 5sfe, 3sgte, 3sge, v6, v8, anything

We are working on the speedo and tachometer. They will be available in mid 2009

PearlJammzz · 09-26-2008, 09:05 PM

Quote:

Originally Posted by PearlJammzz

I am assuming you can switch the gauges to the other sides? I'd rather have oil temp and such on left and fuel/water on right

/bump

.

baktasht · 09-26-2008, 09:06 PM

Quote:

Originally Posted by PearlJammzz

/bump

.

oh, sorry, missed that post

Nope, they are not interchangable.

miracleman89 · 09-27-2008, 02:36 AM

Quote:

Originally Posted by baktasht

We are working on the speedo and tachometer. They will be available in mid 2009

Let me know when they are available!!!

baktasht · 03-25-2009, 06:11 PM

They arrived today and are shipping tomorrow. All orders should be shipped by Friday.

xmista2x · 03-26-2009, 12:53 AM

Quote:

Originally Posted by baktasht

They arrived today and are shipping tomorrow. All orders should be shipped by Friday.

Exceptional. Baktash, lmk when you ship the fuel gauge...I've figured out a mounting scheme for the sensors already. Also, I FINALLY have a picture of one of the guys' fuse box covers for you! Check your email!

baktasht · 03-26-2009, 11:11 AM

Quote:

Originally Posted by xmista2x

Exceptional. Baktash, lmk when you ship the fuel gauge...I've figured out a mounting scheme for the sensors already. Also, I FINALLY have a picture of one of the guys' fuse box covers for you! Check your email!

Give me a ring and we'll get you all set.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.mr2.com/forums/ems-powered/Toyota-MR2-33572-full-digital-cluster.html
Posted By	For	Type	Date
Need: stock VTV for BPV and Apillar guage pod (eventually :) ) - U-Moc Forums	This thread	Refback	09-29-2008 08:05 PM
Need: stock VTV for BPV and Apillar guage pod (eventually :) ) - U-Moc Forums	This thread	Refback	09-29-2008 07:28 PM

09-24-2008, 03:12 AM	#21 (permalink)
MR2 Drifter No Drifting Skills Join Date: Jun 2008 Location: Chicago Posts: 956 Thanks: 3 Thanked 16 Times in 16 Posts iTrader Rating: (2/100% )	So for the fuel does it tell you how many miles you got left before you run out (Like 180 MILES TO E) or is it gonna tell you how much fuel you have from 1-100 (1 being E and 100 being full) Count me in on these as long as there not that expensive Looks really good btw

09-24-2008, 03:16 AM	#22 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,578 Thanks: 19 Thanked 130 Times in 115 Posts My Google Map iTrader Rating: (41/98% )	the fuel is shown as a percentage. 0% is empty 100% is full.

09-24-2008, 03:16 AM	#23 (permalink)
lsgheero RAR! Join Date: Feb 2007 Location: Arizona Posts: 605 Thanks: 7 Thanked 27 Times in 27 Posts My Google Map iTrader Rating: (1/100% )	I think i asked these already but do these work for a aw11?

09-24-2008, 03:22 AM	#25 (permalink)
MR2 Drifter No Drifting Skills Join Date: Jun 2008 Location: Chicago Posts: 956 Thanks: 3 Thanked 16 Times in 16 Posts iTrader Rating: (2/100% )	So when installing this all you will have to do is unplug wires from the gauge cluster and plug them into the digital gauges or do you have to send the wire all the way back to your engine bay and hook them up there? and do you have an estimated price for these beautys???

09-24-2008, 03:24 AM	#26 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,578 Thanks: 19 Thanked 130 Times in 115 Posts My Google Map iTrader Rating: (41/98% )	The fuel level unit will use the stock fuel level sender/sensor. So you'll need to splice into the wire for that. The rest of the gauges have their own sensors that we include which you will need to appropriately install in the engine bay. Price will be announced tomorrow when I post the group buy

09-26-2008, 12:14 AM	#27 (permalink)
PearlJammzz Cage Fighter Join Date: Feb 2006 Posts: 2,139 Thanks: 9 Thanked 70 Times in 66 Posts My Google Map iTrader Rating: (7/100% )	I am assuming you can switch the gauges to the other sides? I'd rather have oil temp and such on left and fuel/water on right

09-26-2008, 01:35 AM	#29 (permalink)
miracleman89 MR2 under construction! Join Date: Mar 2008 Location: Morenci, AZ Posts: 453 Thanks: 18 Thanked 7 Times in 6 Posts iTrader Rating: (0/0% )	Ok this is probably the dumbest question asked yet so, forgive me, I am still trying to learn about the MR2s. 1.) Will this work in a 5SFE? 2.) It said fully digital, so you are planning to make the speedo and RPM gauge digital as well? the pic i saw didn't show them as digital that is why I am asking. Thanks!

09-26-2008, 07:47 PM	#30 (permalink)
mr2boost 343 Gone NEVER Forgotten Join Date: Sep 2005 Location: Bartlett, TN Posts: 411 Thanks: 0 Thanked 35 Times in 30 Posts iTrader Rating: (0/0% )	Your killing me baktasht. Those really look GOOD! Thanks, thanks a lot. I been wanting your SMIC kit, 3" DP, 3" SS Exhaust & now you are putting this stuff out. I already LOVE that boost gauge & you KNEW I would like this. Oh well, our friend Benji (Dance Business) will buy you out for sure. MAN you are killing my wallet. I won't be able to save nothing now. So much for the light weight wheels & stickier tires. NO! I will stick to that next, then your IC & exhaust pieces AND then the gauges. But, I am WANTING those gauges now. "Triple DIN kit too!" ARRRRRGGGGGGGGGG! Seriously, looks GREAT, I am very impressed! IF you need any more testing, just shoot me an e-mail or PM again, hmmmmmm. Daniel

03-25-2009, 06:11 PM	#35 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,578 Thanks: 19 Thanked 130 Times in 115 Posts My Google Map iTrader Rating: (41/98% )	They arrived today and are shipping tomorrow. All orders should be shipped by Friday.