Sponsorship for MR2 Turbo - Page 2

JMr2Die4 · 01-18-2009, 06:22 PM

I'm In Tampa,Fl And Willing To Drive It There But Don't Know The Hours To Get There

JMr2Die4 · 01-18-2009, 06:25 PM

I Meant I Don't Know How Long It Will Take Me To Get There Meaning In Hours Or Days

baktasht · 01-18-2009, 07:15 PM

Quote:

Originally Posted by JMr2Die4

I'm In Tampa,Fl And Willing To Drive It There But Don't Know The Hours To Get There

Unless you're planning on moving closer to Austin, it just won't work. We need someone that can be here when needed and be able to leave their car for installs, dynos, etc...

chrisfromnh · 01-18-2009, 08:44 PM

damn... come up to the northeast and you can spend as much time and do as much as you want to mine.... lol

MR210 · 01-18-2009, 11:18 PM

I'm located in San Antonio, you know the condition of my car. Green with no clear coat :P I am planning on replacing several exterior pieces and getting a paint job before the summer.

Id say around 3 months on the exterior done and then just redoing the seats.

Im sure you'll find someone in a better condition, but if not I'm always here. ~45 min drive.

MixMaster · 02-05-2009, 10:58 AM

I am in Austin and have a 93 All-Trac with a JDM MR2 3S-GTE motor installed. Compression is 175 across the board, car runs strong.
It is not my daily and sits in my garage. Dtrain has 143k on it.
I can leave it there or bring it down at anytime. I have a very free schedule with work. Only thing I would ask would be help with anything I wanted to install such as a ST205 rear subframe. I dont have acess to a lift.
Let me know.

Paul

Ku-sama · 02-05-2009, 11:34 AM

I don't fit the bill at all

BUT! I'd move there after I get swapped!

baktasht · 02-06-2009, 12:48 AM

Quote:

Originally Posted by MixMaster

I am in Austin and have a 93 All-Trac with a JDM MR2 3S-GTE motor installed. Compression is 175 across the board, car runs strong.
It is not my daily and sits in my garage. Dtrain has 143k on it.
I can leave it there or bring it down at anytime. I have a very free schedule with work. Only thing I would ask would be help with anything I wanted to install such as a ST205 rear subframe. I dont have acess to a lift.
Let me know.

Paul

Paul, replyign to your PM here in a min.

Mr2civic817 · 02-06-2009, 07:28 PM

Hey Baktash,

I know you hear this alot from me, but I wanted to thank you for the opportunity, you have given me, and I promise I wont Disappoint you in anyway. Sorry Hope I don't give you the Idea I'm E-stalking you. LOL

Thanks Alot Bro,

junior40er · 02-07-2009, 09:34 AM

I can drive there and drop my car off there to you guys for as log as u might need it for depending on the kind of work you guys plan on doing. Also depending if this is gonna cost me money besides the time and gas to get the car there. Let me know though. I'm talking about the MR2 Turbo in my sig.

Mods:
Exterior:
- GReddy Front Lip
- GReddy Side Skirts
- Toms Rear Bumper
- Bomex Scoops
- Bomex Drift Wing
- JDM OEM 94+ Tail Lights w/Amber Inserts
- JDM OEM Clear Corners
- JDM OEM H4 Headlight Conversion
Suspension/Wheels:
- Cusco Comp-zero Coilover with Cusco Pillowball Mounts
- Volk Racing TE-37s: 18x7.5(front), 18x8.5(rear) Bronze
- Mackin Industries Black Lug Nuts
- Brembo Cross Drilled Rotors(Front)
Engine:
- Greddy Intercooler with 8" Permocool IC Fan
- Greddy Power Extreme Exhaust
- Centerforce Stage 1 Clutch
- Chromed 3SGTE Valve Cover
- TRD Radiator cap
- TRD Oil Cap
Sound:
- Alpine 7894 MP3 player
- JBL 6.5" Components with 1" Tweeter
Interior:
- Sparco Torino Seats(Black/Silver)
- Toyota Celica GTS Steering Wheel
- GReddy 60MM Peak/Warning Boost Gauge on A-Pillar Pod
- Blitz Full Auto Turbo Timer
- JDM MR2 Door Sills
- Sakuragi's SPL Shift Boot

Car runs pretty flawlessly and has about 110K miles.

no current sponsors on it and is my second car so depending on the deal I would be willing to loan it to you guys for work and sponsorship. I do plan on keeping this car as long as I can drive.

baktasht · 02-12-2009, 07:41 PM

Quote:

Originally Posted by Mr2civic817

Hey Baktash,

I know you hear this alot from me, but I wanted to thank you for the opportunity, you have given me, and I promise I wont Disappoint you in anyway. Sorry Hope I don't give you the Idea I'm E-stalking you. LOL

Thanks Alot Bro,

Joe,
No problem at all. It's a pleasure to be working with you as our 2009 sponsor car. Hopefully we'll get that badboy back in your hands in the next week or so with lots of new goodies

Quote:

Originally Posted by junior40er

I can drive there and drop my car off there to you guys for as log as u might need it for depending on the kind of work you guys plan on doing. Also depending if this is gonna cost me money besides the time and gas to get the car there. Let me know though. I'm talking about the MR2 Turbo in my sig.

Mods:
Exterior:
- GReddy Front Lip
- GReddy Side Skirts
- Toms Rear Bumper
- Bomex Scoops
- Bomex Drift Wing
- JDM OEM 94+ Tail Lights w/Amber Inserts
- JDM OEM Clear Corners
- JDM OEM H4 Headlight Conversion
Suspension/Wheels:
- Cusco Comp-zero Coilover with Cusco Pillowball Mounts
- Volk Racing TE-37s: 18x7.5(front), 18x8.5(rear) Bronze
- Mackin Industries Black Lug Nuts
- Brembo Cross Drilled Rotors(Front)
Engine:
- Greddy Intercooler with 8" Permocool IC Fan
- Greddy Power Extreme Exhaust
- Centerforce Stage 1 Clutch
- Chromed 3SGTE Valve Cover
- TRD Radiator cap
- TRD Oil Cap
Sound:
- Alpine 7894 MP3 player
- JBL 6.5" Components with 1" Tweeter
Interior:
- Sparco Torino Seats(Black/Silver)
- Toyota Celica GTS Steering Wheel
- GReddy 60MM Peak/Warning Boost Gauge on A-Pillar Pod
- Blitz Full Auto Turbo Timer
- JDM MR2 Door Sills
- Sakuragi's SPL Shift Boot

Car runs pretty flawlessly and has about 110K miles.

no current sponsors on it and is my second car so depending on the deal I would be willing to loan it to you guys for work and sponsorship. I do plan on keeping this car as long as I can drive.

Shoot me an email with this info admin@emspowered.com, we've got our main sponsor car for the year. But if we find the right person and the right car we may do a few partial sponsorships as well.

junior40er · 02-13-2009, 11:46 AM

I emailed that same info as well as a couple of pics. Hope to hear from u guys.

baktasht · 02-13-2009, 12:15 PM

We are looking for 2-3 cars for our new bolton 400+hp capable turbo upgrade. This is an entry level kit that will be selling for under $1800 when announced for public sale. It will work on Gen2 or Gen3 3sgte's.

contact me if you're interested in being a beta tester.
admin@emspowered.com

wagonis · 02-13-2009, 12:19 PM

I got the MKII and willing to drive and leave the car with you...just missing the 3SGTE. Feel free to drop one in though.

baktasht · 02-13-2009, 12:35 PM

Quote:

Originally Posted by wagonis

I got the MKII and willing to drive and leave the car with you...just missing the 3SGTE. Feel free to drop one in though.

Worth a shot

wagonis · 02-13-2009, 12:43 PM

Quote:

Originally Posted by baktasht

Worth a shot

That's what I thought

mr2magic · 02-13-2009, 02:08 PM

You have absolutely no idea how much I hate you at thas moment

My car is begging for this but I can't make it clear to her, that it's a no go

If she gets psychotic I'm giving her your address bakky boy!!!

maynbra · 02-14-2009, 09:52 AM

I have a 1991 mr2 with a gen2 jdm swap. i have very few mods. Apexi n1 exhaust,manual boost gauge,hks ssqv blow off valve. Im in Cypress,Tx willing to drive to Austin and drop off for as long as you need. Dont know how this works though. Do i get the parts at a discounted rate or free? Let me know 281 705 7688 Brandon is the name.

baktasht · 02-14-2009, 03:23 PM

Quote:

Originally Posted by maynbra

I have a 1991 mr2 with a gen2 jdm swap. i have very few mods. Apexi n1 exhaust,manual boost gauge,hks ssqv blow off valve. Im in Cypress,Tx willing to drive to Austin and drop off for as long as you need. Dont know how this works though. Do i get the parts at a discounted rate or free? Let me know 281 705 7688 Brandon is the name.

Email me.

02-05-2009, 10:58 AM	#26 (permalink)
MixMaster No Skills Join Date: Oct 2008 Location: Austin, TX Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Have a car u can use I think I am in Austin and have a 93 All-Trac with a JDM MR2 3S-GTE motor installed. Compression is 175 across the board, car runs strong. It is not my daily and sits in my garage. Dtrain has 143k on it. I can leave it there or bring it down at anytime. I have a very free schedule with work. Only thing I would ask would be help with anything I wanted to install such as a ST205 rear subframe. I dont have acess to a lift. Let me know. Paul Last edited by MixMaster; 02-05-2009 at 01:55 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-18-2009, 06:22 PM	#21 (permalink)
JMr2Die4 No Skills Join Date: Jun 2007 Location: Tampa, Florida Posts: 26 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I'm In Tampa,Fl And Willing To Drive It There But Don't Know The Hours To Get There

01-18-2009, 06:25 PM	#22 (permalink)
JMr2Die4 No Skills Join Date: Jun 2007 Location: Tampa, Florida Posts: 26 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I Meant I Don't Know How Long It Will Take Me To Get There Meaning In Hours Or Days

01-18-2009, 08:44 PM	#24 (permalink)
chrisfromnh drift Join Date: Jun 2008 Location: Weare, NH Posts: 135 Thanks: 8 Thanked 1 Time in 1 Post Blog Entries: 2 iTrader Rating: (0/0% )	damn... come up to the northeast and you can spend as much time and do as much as you want to mine.... lol

01-18-2009, 11:18 PM	#25 (permalink)
MR210 Some Skills Join Date: Dec 2008 Location: San Antonio Posts: 95 Thanks: 3 Thanked 3 Times in 2 Posts My Google Map iTrader Rating: (0/0% )	I'm located in San Antonio, you know the condition of my car. Green with no clear coat :P I am planning on replacing several exterior pieces and getting a paint job before the summer. Id say around 3 months on the exterior done and then just redoing the seats. Im sure you'll find someone in a better condition, but if not I'm always here. ~45 min drive.

02-05-2009, 11:34 AM	#27 (permalink)
Ku-sama Cage Fighter Join Date: Mar 2008 Location: Germantown, MD Posts: 1,466 Thanks: 8 Thanked 31 Times in 31 Posts My Google Map iTrader Rating: (2/100% )	I don't fit the bill at all BUT! I'd move there after I get swapped!

02-06-2009, 07:28 PM	#29 (permalink)
Mr2civic817 Cage Fighter Join Date: Oct 2006 Location: Arlington Tx Posts: 152 Thanks: 7 Thanked 3 Times in 3 Posts iTrader Rating: (1/100% )	Hey Baktash, I know you hear this alot from me, but I wanted to thank you for the opportunity, you have given me, and I promise I wont Disappoint you in anyway. Sorry Hope I don't give you the Idea I'm E-stalking you. LOL Thanks Alot Bro,

02-07-2009, 09:34 AM	#30 (permalink)
junior40er Boost..My daily Addiction Join Date: Aug 2008 Posts: 179 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	I can drive there and drop my car off there to you guys for as log as u might need it for depending on the kind of work you guys plan on doing. Also depending if this is gonna cost me money besides the time and gas to get the car there. Let me know though. I'm talking about the MR2 Turbo in my sig. Mods: Exterior: - GReddy Front Lip - GReddy Side Skirts - Toms Rear Bumper - Bomex Scoops - Bomex Drift Wing - JDM OEM 94+ Tail Lights w/Amber Inserts - JDM OEM Clear Corners - JDM OEM H4 Headlight Conversion Suspension/Wheels: - Cusco Comp-zero Coilover with Cusco Pillowball Mounts - Volk Racing TE-37s: 18x7.5(front), 18x8.5(rear) Bronze - Mackin Industries Black Lug Nuts - Brembo Cross Drilled Rotors(Front) Engine: - Greddy Intercooler with 8" Permocool IC Fan - Greddy Power Extreme Exhaust - Centerforce Stage 1 Clutch - Chromed 3SGTE Valve Cover - TRD Radiator cap - TRD Oil Cap Sound: - Alpine 7894 MP3 player - JBL 6.5" Components with 1" Tweeter Interior: - Sparco Torino Seats(Black/Silver) - Toyota Celica GTS Steering Wheel - GReddy 60MM Peak/Warning Boost Gauge on A-Pillar Pod - Blitz Full Auto Turbo Timer - JDM MR2 Door Sills - Sakuragi's SPL Shift Boot Car runs pretty flawlessly and has about 110K miles. no current sponsors on it and is my second car so depending on the deal I would be willing to loan it to you guys for work and sponsorship. I do plan on keeping this car as long as I can drive.

02-13-2009, 11:46 AM	#32 (permalink)
junior40er Boost..My daily Addiction Join Date: Aug 2008 Posts: 179 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	I emailed that same info as well as a couple of pics. Hope to hear from u guys.

02-13-2009, 12:15 PM	#33 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,664 Thanks: 19 Thanked 133 Times in 118 Posts My Google Map iTrader Rating: (41/98% )	We are looking for 2-3 cars for our new bolton 400+hp capable turbo upgrade. This is an entry level kit that will be selling for under $1800 when announced for public sale. It will work on Gen2 or Gen3 3sgte's. contact me if you're interested in being a beta tester. admin@emspowered.com

02-13-2009, 12:19 PM	#34 (permalink)
wagonis Cage Fighter Join Date: Jun 2006 Location: Tampa Bay area, FL Posts: 1,082 Thanks: 50 Thanked 22 Times in 22 Posts iTrader Rating: (5/100% )	I got the MKII and willing to drive and leave the car with you...just missing the 3SGTE. Feel free to drop one in though.

02-13-2009, 02:08 PM	#37 (permalink)
mr2magic deutsch type skillz Join Date: Feb 2008 Location: Hannover, Germany Posts: 927 Thanks: 77 Thanked 36 Times in 33 Posts My Google Map iTrader Rating: (3/100% )	You have absolutely no idea how much I hate you at thas moment My car is begging for this but I can't make it clear to her, that it's a no go If she gets psychotic I'm giving her your address bakky boy!!!

02-14-2009, 09:52 AM	#38 (permalink)
maynbra No Skills Join Date: Nov 2008 Location: Houston Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	I have a 1991 mr2 with a gen2 jdm swap. i have very few mods. Apexi n1 exhaust,manual boost gauge,hks ssqv blow off valve. Im in Cypress,Tx willing to drive to Austin and drop off for as long as you need. Dont know how this works though. Do i get the parts at a discounted rate or free? Let me know 281 705 7688 Brandon is the name.