Sponsorship for MR2 Turbo

baktasht · 01-16-2009, 06:17 PM

Hi guys, this year we're going to concentrate our sponsorship funds on a single car instead of several cars like we did last year. We need an owner with a MKII MR2 Turbo. We need a car and owner that roughly meets the following criteria:

* You need to be willing to bring your car to Austin for parts installs, testing. We prefer to have the car be in Texas to avoid long delays

* The car needs to be equipped with a 3sgte or a hybrid of some sort utilizing a 3sgte cylinder head

* The motor and drivetrain need to be in good running condition and have good compression and leakdown numbers

* The interior and exterior need to be in fairly good shape. Show quality isn't required. Just "good" condition. If you're not sure if you meet this requirement, send us pictures and we'll take a look

* You must plan on keeping your car for at least another 18 months from the start of sponsorship by EMSPowered

If you think you fit the bill, email us your entry with the following info to support@emspowered.com

* First/last name
* Phone number(s) that you can be reached at
* Full address and city where you and your car are located (with new location if you're moving soon)
* Your availability to be contacted by phone
* Pictures of the car's exterior, interior, engine bay, and front trunk
* A detailed list of current modifications that are already installed on the car
* A detailed list of other upgrades you have purchased but not yet installed
* List of any sponsorship commitments you may already have (just to make sure we don't conflict)

Thanks,
Baktash
EMSPowered.com

eckoman_pdx · 01-16-2009, 07:05 PM

Dang, I'm no where near Austin. Good luck!!

31337 · 01-16-2009, 07:14 PM

pfft, neither am I

NOVA here.

baktasht · 01-16-2009, 07:30 PM

Ya, definitely need someone local to Austin, TX. Or willing to drive here.

eckoman_pdx · 01-16-2009, 07:32 PM

Quote:

Originally Posted by baktasht

Ya, definitely need someone local to Austin, TX. Or willing to drive here.

If I were within a 1 day drive, I wouldn't mind. Portland, however, is probably more like a 3 day drive. Oh well. I'm sure you'll find someone local!!

baktasht · 01-16-2009, 11:00 PM

Ya, that's a bit far. I prefer someone in Texas. I'm sure someone is up for it having their MR2 Turbo turned into an absolute monster for almost no money out of pocket

Eddie@JP · 01-17-2009, 12:01 AM

You lost me at -The motor and drivetrain need to be in good running condition.

mr.asian.m2 · 01-17-2009, 12:08 AM

this sound kind of good. i'll give you a call. one of my friend came up to austin like 2 weeks ago for the gauge meter. look great. thanks for the fuse box cover. look great too. we are having our mr2 cruise tomorrow. so, we'll take some pic of our mr2 with the fuse cover for you. again...thanks alot

TreyMR2 · 01-17-2009, 12:28 AM

Damn wish I still had a job. Lol I got family over there I could come stay with when I needed to. If your still looking when I get my new one going pretty good and I'd be interested. I should be painted and everything before the summer. Fingers crossed Lol Most of my body work is already done.

baktasht · 01-17-2009, 12:37 AM

Quote:

Originally Posted by TreyMR2

Damn wish I still had a job. Lol I got family over there I could come stay with when I needed to. If your still looking when I get my new one going pretty good and I'd be interested. I should be painted and everything before the summer. Fingers crossed Lol Most of my body work is already done.

Keep me updated.

Quote:

Originally Posted by mr.asian.m2

this sound kind of good. i'll give you a call. one of my friend came up to austin like 2 weeks ago for the gauge meter. look great. thanks for the fuse box cover. look great too. we are having our mr2 cruise tomorrow. so, we'll take some pic of our mr2 with the fuse cover for you. again...thanks alot

No problem, anytime

skillzo1 · 01-17-2009, 02:48 AM

B....always giving to our community. Awesome Vendor. Post in the texas area.

TreyMR2 · 01-17-2009, 03:04 AM

Quote:

Originally Posted by baktasht

Keep me updated.

Will do, if not for this I'll be getting in touch with you to pick up some smoked corners once shes painted... Lol

mr2magic · 01-17-2009, 06:15 AM

damn

I would give you the car at the drop of a hat. you could do what you want in the time you need. I don't drive it much anymore anyway because it's no fun here in germany (tax, gas price etc.)

Timon · 01-17-2009, 01:50 PM

I'll just lend you guys my MKI, you can drop in a 3SGTE, and then mod it to hell. At the end of the 18 months I'll come take it off your hands. NO CHARGE to you!

baktasht · 01-17-2009, 04:33 PM

Quote:

Originally Posted by Timon

I'll just lend you guys my MKI, you can drop in a 3SGTE, and then mod it to hell. At the end of the 18 months I'll come take it off your hands. NO CHARGE to you!

Unfortunately we need an MKII SW20 MR2

Timon · 01-17-2009, 04:55 PM

I know, I was just kidding

.

baktasht · 01-17-2009, 05:24 PM

Quote:

Originally Posted by Timon

I know, I was just kidding

.

Dance_Business · 01-18-2009, 12:50 AM

I have the chassis and tranny.... Just missing the 3sgte part...

Gairloch · 01-18-2009, 05:13 PM

^^ So close yet so far away

eckoman_pdx · 01-18-2009, 06:13 PM

Quote:

Originally Posted by Gairloch

^^ So close yet so far away

I have the chassis, tranny, and 3sgte part done....just missing the near Austin part. LOL

01-16-2009, 06:17 PM	#1 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,657 Thanks: 19 Thanked 133 Times in 118 Posts My Google Map iTrader Rating: (41/98% )	Sponsorship for MR2 Turbo Hi guys, this year we're going to concentrate our sponsorship funds on a single car instead of several cars like we did last year. We need an owner with a MKII MR2 Turbo. We need a car and owner that roughly meets the following criteria: * You need to be willing to bring your car to Austin for parts installs, testing. We prefer to have the car be in Texas to avoid long delays * The car needs to be equipped with a 3sgte or a hybrid of some sort utilizing a 3sgte cylinder head * The motor and drivetrain need to be in good running condition and have good compression and leakdown numbers * The interior and exterior need to be in fairly good shape. Show quality isn't required. Just "good" condition. If you're not sure if you meet this requirement, send us pictures and we'll take a look * You must plan on keeping your car for at least another 18 months from the start of sponsorship by EMSPowered If you think you fit the bill, email us your entry with the following info to support@emspowered.com * First/last name * Phone number(s) that you can be reached at * Full address and city where you and your car are located (with new location if you're moving soon) * Your availability to be contacted by phone * Pictures of the car's exterior, interior, engine bay, and front trunk * A detailed list of current modifications that are already installed on the car * A detailed list of other upgrades you have purchased but not yet installed * List of any sponsorship commitments you may already have (just to make sure we don't conflict) Thanks, Baktash EMSPowered.com

01-18-2009, 05:13 PM	#19 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,848 Thanks: 125 Thanked 258 Times in 228 Posts My Google Map iTrader Rating: (7/100% )	^^ So close yet so far away __________________ "Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-16-2009, 07:05 PM	#2 (permalink)
eckoman_pdx Custom Car Enthusiast Join Date: Sep 2007 Location: Portland, Oregon Posts: 1,245 Thanks: 42 Thanked 71 Times in 59 Posts iTrader Rating: (3/100% )	Dang, I'm no where near Austin. Good luck!!

01-16-2009, 07:14 PM	#3 (permalink)
31337 Have Gun, Will Travel Join Date: Feb 2007 Location: Reston, Virginia Posts: 389 Thanks: 51 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (2/100% )	pfft, neither am I NOVA here.

01-16-2009, 07:30 PM	#4 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,657 Thanks: 19 Thanked 133 Times in 118 Posts My Google Map iTrader Rating: (41/98% )	Ya, definitely need someone local to Austin, TX. Or willing to drive here.

01-16-2009, 11:00 PM	#6 (permalink)
baktasht EMSPowered.com Join Date: Oct 2005 Location: Austin, TX Posts: 4,657 Thanks: 19 Thanked 133 Times in 118 Posts My Google Map iTrader Rating: (41/98% )	Ya, that's a bit far. I prefer someone in Texas. I'm sure someone is up for it having their MR2 Turbo turned into an absolute monster for almost no money out of pocket

01-17-2009, 12:01 AM	#7 (permalink)
Eddie@JP No Skills Join Date: Jan 2009 Posts: 16 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	You lost me at -The motor and drivetrain need to be in good running condition.

01-17-2009, 12:08 AM	#8 (permalink)
mr.asian.m2 SoCal/houston's mr2 Join Date: Apr 2008 Location: houston texas Posts: 1,274 Thanks: 20 Thanked 21 Times in 19 Posts iTrader Rating: (0/0% )	this sound kind of good. i'll give you a call. one of my friend came up to austin like 2 weeks ago for the gauge meter. look great. thanks for the fuse box cover. look great too. we are having our mr2 cruise tomorrow. so, we'll take some pic of our mr2 with the fuse cover for you. again...thanks alot

01-17-2009, 12:28 AM	#9 (permalink)
TreyMR2 Gen3 swap DONE!! Join Date: Jun 2007 Posts: 2,513 Thanks: 30 Thanked 60 Times in 58 Posts iTrader Rating: (10/100% )	Damn wish I still had a job. Lol I got family over there I could come stay with when I needed to. If your still looking when I get my new one going pretty good and I'd be interested. I should be painted and everything before the summer. Fingers crossed Lol Most of my body work is already done.

01-17-2009, 02:48 AM	#11 (permalink)
skillzo1 Streets closed pizza boy! Join Date: Jul 2005 Location: Stankonia Posts: 991 Thanks: 33 Thanked 16 Times in 15 Posts Blog Entries: 1 iTrader Rating: (5/100% )	B....always giving to our community. Awesome Vendor. Post in the texas area.

01-17-2009, 06:15 AM	#13 (permalink)
mr2magic deutsch type skillz Join Date: Feb 2008 Location: Hannover, Germany Posts: 927 Thanks: 77 Thanked 36 Times in 33 Posts My Google Map iTrader Rating: (3/100% )	damn I would give you the car at the drop of a hat. you could do what you want in the time you need. I don't drive it much anymore anyway because it's no fun here in germany (tax, gas price etc.)

01-17-2009, 01:50 PM	#14 (permalink)
Timon MR2 MKI AW11 Join Date: Feb 2008 Location: Utah Posts: 628 Thanks: 13 Thanked 37 Times in 33 Posts My Google Map iTrader Rating: (0/0% )	I'll just lend you guys my MKI, you can drop in a 3SGTE, and then mod it to hell. At the end of the 18 months I'll come take it off your hands. NO CHARGE to you!

01-17-2009, 04:55 PM	#16 (permalink)
Timon MR2 MKI AW11 Join Date: Feb 2008 Location: Utah Posts: 628 Thanks: 13 Thanked 37 Times in 33 Posts My Google Map iTrader Rating: (0/0% )	I know, I was just kidding .

01-18-2009, 12:50 AM	#18 (permalink)
Dance_Business Mad Dance Skills Join Date: Apr 2006 Location: 20 minutes to Graceland Posts: 1,011 Thanks: 78 Thanked 8 Times in 8 Posts My Google Map iTrader Rating: (4/100% )	I have the chassis and tranny.... Just missing the 3sgte part...