3s mounts

lucky_charms · 10-20-2009, 08:48 PM

is there a templet i can look at or do i gota do it all by hand or does somebody make these

DCKilla · 10-21-2009, 12:31 AM

Check here

3sgte swap info

Then check here

Speed - Source - Design. Fabricate. Produce. Install. Maintain.

Have a nice day

328FTW · 10-21-2009, 04:33 AM

Register at the twobrutal forums and then go to the filestore section and there is a 3sgte template .pdf file I used that worked perfect for the celica motor I put in. I used no jig no flash tools i just played with the engine position for a few hours then drilled holes and tack welded the engine mounts into the car before testing the bolts fit through and welding it all up for good.

lucky_charms · 10-21-2009, 10:50 AM

aithe thanks

mr220v · 10-21-2009, 11:35 AM

Side2side is also working on a no-weld solution.

lucky_charms · 10-21-2009, 11:40 AM

oh yeah im gona have to check that out

jkprow · 11-09-2009, 11:59 PM

Quote:

Originally Posted by mr220v

Side2side is also working on a no-weld solution.

Any more info on this solution? I'm interested.

lucky_charms · 11-10-2009, 11:49 AM

yeah what ever happend to the no weld solution

mr220v · 11-10-2009, 11:51 AM

Kameleon is putting a beams 3s in his car right now. Whatever he comes up with should be able to be duplicated. Mounting a beams 3s really isn't all that hard.

lucky_charms · 11-10-2009, 11:52 AM

and its a no weld solution??

kameleon · 11-10-2009, 04:52 PM

Quote:

Originally Posted by lucky_charms

and its a no weld solution??

Yup

The main thing is we have 3 test cars, all with BEAMS engines... but no 3sgte's. I am going to try to test my Gen4 3sgte with the mounts to see if it will fit also but would like a few others if possible.

lucky_charms · 11-10-2009, 05:18 PM

ill volunteer my car if it helps any

jkprow · 11-12-2009, 11:55 AM

I'd definitely like to help out, but I'm all the way in Seattle. However, if you can think of something that I can do, please let me know.

Eager to hear the results of the attempt at mounthing the GTE in your mounts, keep us posted

10-20-2009, 08:48 PM	#1 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: small ass place in ohio Posts: 244 Thanks: 4 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	3s mounts is there a templet i can look at or do i gota do it all by hand or does somebody make these

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-21-2009, 12:31 AM	#2 (permalink)
DCKilla Some Skills Join Date: May 2008 Location: Pearl, MS Posts: 94 Thanks: 1 Thanked 2 Times in 2 Posts iTrader Rating: (0/0% )	Check here 3sgte swap info Then check here Speed - Source - Design. Fabricate. Produce. Install. Maintain. Have a nice day

10-21-2009, 04:33 AM	#3 (permalink)
328FTW 3vzfe tinkering Join Date: Aug 2008 Location: New Zealand Posts: 1,531 Thanks: 12 Thanked 99 Times in 83 Posts My Google Map iTrader Rating: (0/0% )	Register at the twobrutal forums and then go to the filestore section and there is a 3sgte template .pdf file I used that worked perfect for the celica motor I put in. I used no jig no flash tools i just played with the engine position for a few hours then drilled holes and tack welded the engine mounts into the car before testing the bolts fit through and welding it all up for good.

10-21-2009, 10:50 AM	#4 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: small ass place in ohio Posts: 244 Thanks: 4 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	aithe thanks

10-21-2009, 11:35 AM	#5 (permalink)
mr220v Beams Owners Group Join Date: Mar 2006 Posts: 1,791 Thanks: 13 Thanked 139 Times in 117 Posts iTrader Rating: (8/100% )	Side2side is also working on a no-weld solution.

10-21-2009, 11:40 AM	#6 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: small ass place in ohio Posts: 244 Thanks: 4 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	oh yeah im gona have to check that out

11-10-2009, 11:49 AM	#8 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: small ass place in ohio Posts: 244 Thanks: 4 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	yeah what ever happend to the no weld solution

11-10-2009, 11:51 AM	#9 (permalink)
mr220v Beams Owners Group Join Date: Mar 2006 Posts: 1,791 Thanks: 13 Thanked 139 Times in 117 Posts iTrader Rating: (8/100% )	Kameleon is putting a beams 3s in his car right now. Whatever he comes up with should be able to be duplicated. Mounting a beams 3s really isn't all that hard.

11-10-2009, 11:52 AM	#10 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: small ass place in ohio Posts: 244 Thanks: 4 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	and its a no weld solution??

11-10-2009, 05:18 PM	#12 (permalink)
lucky_charms custom Join Date: Aug 2009 Location: small ass place in ohio Posts: 244 Thanks: 4 Thanked 0 Times in 0 Posts My Google Map iTrader Rating: (0/0% )	ill volunteer my car if it helps any

11-12-2009, 11:55 AM	#13 (permalink)
jkprow No Skills Join Date: Oct 2009 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I'd definitely like to help out, but I'm all the way in Seattle. However, if you can think of something that I can do, please let me know. Eager to hear the results of the attempt at mounthing the GTE in your mounts, keep us posted