SC12 Vs. SC14 Supercharger Pulley

Lex · 01-31-2007, 09:39 AM

Hey Gang,

This is David and I run this forum www.lextreme.com. Anyway, I have a quick question for all you Mr. 2 experts. I would like to know if the SC12 pulley interchangeable with SC14. I recently got a free Previa from my neighbor and would like to increase the boost. Perhaps if possible the SC12 pulley would be a bolt on.

Weasy2k · 01-31-2007, 11:36 AM

Did you want to speed up the SC14? Normally crank and other pulleys around the s/c are changed.

Is there even a size difference in pulleys?

EDIT:
Welcome to the forum BTW Dave, how is lextreme doing?

Lex · 01-31-2007, 11:40 AM

I measured the stock SC14 and its 4". I am looking for 3" pulley to make some more hp for this family hauler. Perhaps i might have to go with a custom made.

Weasy2k · 01-31-2007, 02:11 PM

Yea as long as all the air can be bypassed at idle and what not as the stock setup the clutch disables the s/c

jdchmiel · 08-07-2007, 02:59 PM

they do not swap one for one. the splines are not the same length on the shaft. Some machining can make it work, but it is beyond my diy capabilities.

mr2tim · 04-26-2008, 09:05 AM

Hey Lex

Real curious about that sc-14 as I've never seen one, do you have pics?

mr2tim
Supercharzed Toyz

01-31-2007, 09:39 AM	#1 (permalink)
Lex No Skills Join Date: Jan 2007 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	SC12 Vs. SC14 Supercharger Pulley Hey Gang, This is David and I run this forum www.lextreme.com. Anyway, I have a quick question for all you Mr. 2 experts. I would like to know if the SC12 pulley interchangeable with SC14. I recently got a free Previa from my neighbor and would like to increase the boost. Perhaps if possible the SC12 pulley would be a bolt on.

01-31-2007, 11:36 AM	#2 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,895 Thanks: 34 Thanked 80 Times in 66 Posts iTrader Rating: (9/100% )	Did you want to speed up the SC14? Normally crank and other pulleys around the s/c are changed. Is there even a size difference in pulleys? EDIT: Welcome to the forum BTW Dave, how is lextreme doing? __________________ -Johnny @ Sea2Sky Tuning - www.sea2skytuning.com http://www.mr2.com/forums/sea2sky-tu...-out-sale.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-31-2007, 11:40 AM	#3 (permalink)
Lex No Skills Join Date: Jan 2007 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I measured the stock SC14 and its 4". I am looking for 3" pulley to make some more hp for this family hauler. Perhaps i might have to go with a custom made.

01-31-2007, 02:11 PM	#4 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,895 Thanks: 34 Thanked 80 Times in 66 Posts iTrader Rating: (9/100% )	Yea as long as all the air can be bypassed at idle and what not as the stock setup the clutch disables the s/c

08-07-2007, 02:59 PM	#5 (permalink)
jdchmiel No Skills Join Date: Sep 2006 Location: raleigh nc Posts: 280 Thanks: 4 Thanked 5 Times in 5 Posts iTrader Rating: (1/100% )	they do not swap one for one. the splines are not the same length on the shaft. Some machining can make it work, but it is beyond my diy capabilities.

04-26-2008, 09:05 AM	#6 (permalink)
mr2tim SUPERcharZed ToyZ RacZer Join Date: Mar 2008 Location: South Florida Posts: 690 Thanks: 2 Thanked 41 Times in 38 Posts My Google Map iTrader Rating: (2/100% )	Hey Lex Real curious about that sc-14 as I've never seen one, do you have pics? mr2tim Supercharzed Toyz