JDM injectors help

[Xi-Guy]

Hi all,

I know MR2 turbo MKII came with low impedance side feeds, so while looking for a suitable injector for my JDM 1993, I came across these 800cc sards.

Funny thing was, in the description it said:

You are viewing a BRAND NEW set of 4 X 800cc Fuel Injectors for the 3S-GTE engine found in the SW20 MR2
The injectors are low impedance and will need the use of the dropping resistor if used on the 3S-GTE engines originally equipped with high imedance injectors (non-vvti).

I interpret it as non-vvti needs high impedance.

I didnt think mr2s had vvti. Is it possible that my JDM has vvti? I dont think so. Anyhow here is the link,

https://www.rhdjapan.com/home/produc...product_id=516

Anyone care to shed some light on this?


Thanks all,

Xi-guy

[Sang]

The article is mistaken. The 3SGTE in the SW20 came with low impedence 440cc injectors and 540cc injectors in 94+ Gen3's.

Sard 800cc's are compatible with the mr2 fuel system.

[Xi-Guy]

Thanks for the reply.

Originally Posted by Sang

The article is mistaken. The 3SGTE in the SW20 came with low impedence 440cc injectors and 540cc injectors in 94+ Gen3's.

Sard 800cc's are compatible with the mr2 fuel system.

I wanted to check that the JDM engines 1992-1993 had the same specs on the fuel injectors .
i.e. low imp and side feed right?

[Sang]

Originally Posted by Xi-Guy

low imp and side feed right?

Yes.