injectors won't fire!!??

rcohen · 10-15-2008, 08:53 PM

I just tried to start my car after replacing the injectors with SARD 800cc's. I am definately getting spark and my FPR reads 45psi when I turn the key. I also checked the fuel lines and confirmed that there definitely is fuel flow. WHen I remove the spark plugs after trying to start the car, I find no hint of fuel. The injectors aren't firing. What's going on? All injectors ARE plugged in and the resistance of the injectors read 3 OHMS. Could the INJ relay be bad? Maybe the IGN relay?? Anyone ever have this problem? Any help appreciated...

fuzor · 10-16-2008, 12:40 PM

ground ???

mr2stealth · 10-16-2008, 01:35 PM

injector seals maybe?

rcohen · 10-30-2008, 08:43 AM

Solved, just stuck. Tapped em' and the fired right up. I hear this is pretty common...

MR2SW22 · 10-30-2008, 03:35 PM

Quote:

Originally Posted by rcohen

Solved, just stuck. Tapped em' and the fired right up. I hear this is pretty common...

like with a hammer tapped them?

10-15-2008, 08:53 PM	#1 (permalink)
rcohen No Skills Join Date: Jan 2006 Posts: 117 Thanks: 2 Thanked 1 Time in 1 Post iTrader Rating: (2/100% )	injectors won't fire!!?? I just tried to start my car after replacing the injectors with SARD 800cc's. I am definately getting spark and my FPR reads 45psi when I turn the key. I also checked the fuel lines and confirmed that there definitely is fuel flow. WHen I remove the spark plugs after trying to start the car, I find no hint of fuel. The injectors aren't firing. What's going on? All injectors ARE plugged in and the resistance of the injectors read 3 OHMS. Could the INJ relay be bad? Maybe the IGN relay?? Anyone ever have this problem? Any help appreciated...

10-16-2008, 12:40 PM	#2 (permalink)
fuzor NO SKILLS??(check my car) Join Date: Oct 2008 Location: SOME WHERE Posts: 32 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	ground ??? Last edited by fuzor; 10-16-2008 at 12:46 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-16-2008, 01:35 PM	#3 (permalink)
mr2stealth Gett Sidewayz Join Date: May 2007 Location: Colorado Springs/Pueblo, Colorado Posts: 598 Thanks: 11 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	injector seals maybe?

10-30-2008, 08:43 AM	#4 (permalink)
rcohen No Skills Join Date: Jan 2006 Posts: 117 Thanks: 2 Thanked 1 Time in 1 Post iTrader Rating: (2/100% )	Solved, just stuck. Tapped em' and the fired right up. I hear this is pretty common...