apexi-2 afc questions

MR2SW22 · 10-29-2008, 10:53 PM

I have an apex-i AFC2 im going to install in the deuce, but im a little worried about the wiring setup. don't get me wrong i've wired many things before, stereos, lights, my IC fan, random stuff, but never anything on the ECU before.

i have a 91T with a USDM motor with a JDM 91T ecu, im hoping there aren't too many wires involved, and that i could hide them very well so that i can mount it where the ash tray is currently.

thanks in advance, hope i can fix my speedo tomorrow, find my oil leak (maybe a seal in the distributor) and hook up the afc2.

Mr_Sw20 · 03-31-2009, 12:22 PM

I 2, need to stall my Apexi S-AFCII. Let me know how it goes?

MR2SW22 · 03-31-2009, 01:41 PM

i don't have the time just yet to make a full write up for it, but it wasn't hard, just time consuming. i wired everything according to the US spec english instructions for the 3s-gte, and it worked on the first try. I had to hide the wires with a wire loom cover in the engine bay, into the cabin of the car, along the back side of the interior and under the arm rest on the console. I will have some pics up of it soon. ask me any questions if you need help.

MR2enV · 07-13-2009, 08:50 AM

its preatty easy just follow the book directions...i have a afc2 in my duece and it works great

MR2SW22 · 07-13-2009, 11:47 AM

Quote:

Originally Posted by MR2enV

its preatty easy just follow the book directions...i have a afc2 in my duece and it works great

haha, love the avatar!

10-29-2008, 10:53 PM	#1 (permalink)
MR2SW22 Just add water! Join Date: Aug 2007 Location: Diamond Bar, CA Posts: 1,750 Thanks: 47 Thanked 25 Times in 24 Posts iTrader Rating: (6/100% )	apexi-2 afc questions I have an apex-i AFC2 im going to install in the deuce, but im a little worried about the wiring setup. don't get me wrong i've wired many things before, stereos, lights, my IC fan, random stuff, but never anything on the ECU before. i have a 91T with a USDM motor with a JDM 91T ecu, im hoping there aren't too many wires involved, and that i could hide them very well so that i can mount it where the ash tray is currently. thanks in advance, hope i can fix my speedo tomorrow, find my oil leak (maybe a seal in the distributor) and hook up the afc2.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-31-2009, 12:22 PM	#2 (permalink)
Mr_Sw20 Newbie Join Date: Mar 2009 Location: Central Valley CA Posts: 20 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I 2, need to stall my Apexi S-AFCII. Let me know how it goes?

03-31-2009, 01:41 PM	#3 (permalink)
MR2SW22 Just add water! Join Date: Aug 2007 Location: Diamond Bar, CA Posts: 1,750 Thanks: 47 Thanked 25 Times in 24 Posts iTrader Rating: (6/100% )	i don't have the time just yet to make a full write up for it, but it wasn't hard, just time consuming. i wired everything according to the US spec english instructions for the 3s-gte, and it worked on the first try. I had to hide the wires with a wire loom cover in the engine bay, into the cabin of the car, along the back side of the interior and under the arm rest on the console. I will have some pics up of it soon. ask me any questions if you need help.

07-13-2009, 08:50 AM	#4 (permalink)
MR2enV WHY SO SERIOUS? Join Date: Mar 2007 Location: Miramar, Florida Posts: 426 Thanks: 0 Thanked 6 Times in 6 Posts iTrader Rating: (3/80% )	its preatty easy just follow the book directions...i have a afc2 in my duece and it works great