Control and strut arms

judaspriest517 · 05-24-2007, 01:37 PM

Can you buy new control and strut arms? If not my only option would be to salvage them off of a parts car, right? I'll explain why when the swelling on my finger goes down and i can type better.

seven_mgte · 05-28-2007, 07:39 PM

I think they are still available, but I believe they would be pretty pricy from the dealer.

I have a full set from an 88 if you want used ones.

judaspriest517 · 05-29-2007, 09:35 AM

I really only need the need the ones from the front drivers side and if you think they will fit an 87 then i'll take them.

seven_mgte · 05-29-2007, 03:44 PM

ya, they should fit no problem. They are still on my parts car, i should be able to pull them tomorrow or thursday.

judaspriest517 · 05-30-2007, 12:28 PM

If it's not too much trouble could you pull the tie rods off as well?

seven_mgte · 06-01-2007, 01:38 PM

Can do. do you need the inner ones or the outer ones or both? Do you need both left and right?

judaspriest517 · 06-01-2007, 06:05 PM

I only need the left inner one. Thank you for this.

05-24-2007, 01:37 PM	#1 (permalink)
judaspriest517 No Skills Join Date: Apr 2007 Posts: 37 Thanks: 1 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (1/100% )	Control and strut arms Can you buy new control and strut arms? If not my only option would be to salvage them off of a parts car, right? I'll explain why when the swelling on my finger goes down and i can type better.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-28-2007, 07:39 PM	#2 (permalink)
seven_mgte Cage Fighter Join Date: Aug 2005 Location: Coquitlam, BC.ca Posts: 327 Thanks: 0 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (0/0% )	I think they are still available, but I believe they would be pretty pricy from the dealer. I have a full set from an 88 if you want used ones.

05-29-2007, 09:35 AM	#3 (permalink)
judaspriest517 No Skills Join Date: Apr 2007 Posts: 37 Thanks: 1 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (1/100% )	I really only need the need the ones from the front drivers side and if you think they will fit an 87 then i'll take them.

05-29-2007, 03:44 PM	#4 (permalink)
seven_mgte Cage Fighter Join Date: Aug 2005 Location: Coquitlam, BC.ca Posts: 327 Thanks: 0 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (0/0% )	ya, they should fit no problem. They are still on my parts car, i should be able to pull them tomorrow or thursday.

05-30-2007, 12:28 PM	#5 (permalink)
judaspriest517 No Skills Join Date: Apr 2007 Posts: 37 Thanks: 1 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (1/100% )	If it's not too much trouble could you pull the tie rods off as well?

06-01-2007, 01:38 PM	#6 (permalink)
seven_mgte Cage Fighter Join Date: Aug 2005 Location: Coquitlam, BC.ca Posts: 327 Thanks: 0 Thanked 7 Times in 7 Posts My Google Map iTrader Rating: (0/0% )	Can do. do you need the inner ones or the outer ones or both? Do you need both left and right?

06-01-2007, 06:05 PM	#7 (permalink)
judaspriest517 No Skills Join Date: Apr 2007 Posts: 37 Thanks: 1 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (1/100% )	I only need the left inner one. Thank you for this.