part identification

lamourke · 10-17-2008, 06:41 PM

hello, can one of the expert please tell me what this part is? the little tag on the part is too faded to read, the local toyota dealer has no idea what it is, it was located belose the mass air box, the severed wire had 2 electrical connections and has 2 vaccuum lines. id really lvoe to know what it is so i can replace it. It doesnt seem to be affecting my driveability but would still like to get a new one since I'm sure it served a purpose.

Luni · 10-17-2008, 08:01 PM

Is there an electrical connector on it that I cant see in the pictures?

I know its one of the vacuum pieces that goes under the intake manifold but it could be for the TVIS, or even the AC system.

Papo J · 10-23-2008, 12:37 PM

That looks like the electrical load idle up VSV. Was it mounted to the side or near the battery tray?

lamourke · 10-24-2008, 04:21 PM

Yes there are 2 wires that dry rotted off that purtrude from the base. it was mounted on the battery tray under the air filter intake.

muffinman · 10-31-2008, 03:27 PM

Is this the part your referring to

It's the VSV that the AC idle-up line is connected to.

10-17-2008, 06:41 PM	#1 (permalink)
lamourke world traveler Join Date: Aug 2007 Location: woodbridge, va Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	part identification hello, can one of the expert please tell me what this part is? the little tag on the part is too faded to read, the local toyota dealer has no idea what it is, it was located belose the mass air box, the severed wire had 2 electrical connections and has 2 vaccuum lines. id really lvoe to know what it is so i can replace it. It doesnt seem to be affecting my driveability but would still like to get a new one since I'm sure it served a purpose. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-17-2008, 08:01 PM	#2 (permalink)
Luni ST185 Powered SW20 Join Date: Oct 2005 Location: Salt Lake City Utah Posts: 2,961 Thanks: 9 Thanked 106 Times in 92 Posts My Google Map iTrader Rating: (8/100% )	Is there an electrical connector on it that I cant see in the pictures? I know its one of the vacuum pieces that goes under the intake manifold but it could be for the TVIS, or even the AC system.

10-23-2008, 12:37 PM	#3 (permalink)
Papo J 6SPD GTE Join Date: Sep 2006 Posts: 189 Thanks: 1 Thanked 19 Times in 18 Posts iTrader Rating: (0/0% )	That looks like the electrical load idle up VSV. Was it mounted to the side or near the battery tray?

10-24-2008, 04:21 PM	#4 (permalink)
lamourke world traveler Join Date: Aug 2007 Location: woodbridge, va Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Yes there are 2 wires that dry rotted off that purtrude from the base. it was mounted on the battery tray under the air filter intake.

10-31-2008, 03:27 PM	#5 (permalink)
muffinman Brain Surgeon Join Date: Jan 2008 Location: Ft. Lauderdale Posts: 1,812 Thanks: 24 Thanked 102 Times in 99 Posts My Google Map iTrader Rating: (1/100% )	Is this the part your referring to It's the VSV that the AC idle-up line is connected to.