Brake Light

Timon · 12-16-2008, 04:18 AM

Well the last few days my brake light on the dash stays on occasionally. I've always double checked to make sure the brake isn't up, and it isn't - nor are any of the calipers actually locking. I pushed/released the button in front of the brake myself, and it doesn't change. It goes away after a bit, but I've had it come back while driving a few times.

I assume that this is caused by a short somewhere after the switch, but I'm wondering if this is a common problem or if anyone has ideas on where to start.

Thanks.

mr29180 · 12-16-2008, 04:34 AM

Did u ever chk ur break fluid??

muffinman · 12-16-2008, 09:17 AM

Brake light on the dash is for the switch at the hand brake , check the switch under the center console.

Timon · 12-16-2008, 04:36 PM

^I pressed the switch myself with no luck of it going away. It went away later after about 5 minutes. So a short, or is the switch itself going bad?

328FTW · 12-16-2008, 04:43 PM

Mine did that then it fixed itself and it never happened again. I have no idea why cause I checked all the connections to the dash and my solder joins but I think it was the switch in the end

Timon · 12-16-2008, 04:58 PM

That's my guess to. It's happened twice now, and it seems to be in relation to the colder weather we've recently had (snow). As of now it is fixed, but I'm sure it will happen again. If it does I'll move into pulling the console apart and checking the connections for the switch.

12-16-2008, 04:18 AM	#1 (permalink)
Timon MR2 MKI AW11 Join Date: Feb 2008 Location: Utah Posts: 628 Thanks: 13 Thanked 37 Times in 33 Posts My Google Map iTrader Rating: (0/0% )	Brake Light Well the last few days my brake light on the dash stays on occasionally. I've always double checked to make sure the brake isn't up, and it isn't - nor are any of the calipers actually locking. I pushed/released the button in front of the brake myself, and it doesn't change. It goes away after a bit, but I've had it come back while driving a few times. I assume that this is caused by a short somewhere after the switch, but I'm wondering if this is a common problem or if anyone has ideas on where to start. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-16-2008, 04:34 AM	#2 (permalink)
mr29180 Cage fighter Join Date: Mar 2008 Location: Frisco (bay area) Posts: 870 Thanks: 1 Thanked 29 Times in 25 Posts iTrader Rating: (0/0% )	Did u ever chk ur break fluid??

12-16-2008, 09:17 AM	#3 (permalink)
muffinman Brain Surgeon Join Date: Jan 2008 Location: Ft. Lauderdale Posts: 1,800 Thanks: 24 Thanked 102 Times in 99 Posts My Google Map iTrader Rating: (1/100% )	Brake light on the dash is for the switch at the hand brake , check the switch under the center console.

12-16-2008, 04:36 PM	#4 (permalink)
Timon MR2 MKI AW11 Join Date: Feb 2008 Location: Utah Posts: 628 Thanks: 13 Thanked 37 Times in 33 Posts My Google Map iTrader Rating: (0/0% )	^I pressed the switch myself with no luck of it going away. It went away later after about 5 minutes. So a short, or is the switch itself going bad?

12-16-2008, 04:43 PM	#5 (permalink)
328FTW 3vzfe tinkering Join Date: Aug 2008 Location: New Zealand Posts: 1,537 Thanks: 12 Thanked 99 Times in 83 Posts My Google Map iTrader Rating: (0/0% )	Mine did that then it fixed itself and it never happened again. I have no idea why cause I checked all the connections to the dash and my solder joins but I think it was the switch in the end

12-16-2008, 04:58 PM	#6 (permalink)
Timon MR2 MKI AW11 Join Date: Feb 2008 Location: Utah Posts: 628 Thanks: 13 Thanked 37 Times in 33 Posts My Google Map iTrader Rating: (0/0% )	That's my guess to. It's happened twice now, and it seems to be in relation to the colder weather we've recently had (snow). As of now it is fixed, but I'm sure it will happen again. If it does I'll move into pulling the console apart and checking the connections for the switch.