Question!!

randomxzero · 02-08-2009, 08:44 PM

Ok so theres this part i dont know what its called on the mkI..
but its attached to the radiator hose going to the block from the filler cap!..
i got both of these of an 85 and yet they are different in the neck angle! this was causing my filler pipe to break because of the stress it was causing on it and how hot the car was getting..
Question is why are they different if its the same year! and same month production.

neck angles!

mr3 · 02-08-2009, 09:20 PM

Maybe it was a recall and one got replaced and the other didn't?

randomxzero · 02-08-2009, 09:40 PM

maybe but i found out thats why that pipe kept breaking i went through four of them!!...

ebouwman · 02-08-2009, 11:21 PM

I've heard that lots of cars have small changes to them partway through the year, lots of times it's little changes to trim. That could be what happened there, and maybe they just decided they wanted to change it. They might have also had a different bend in the rad hose to go with it though.

Jackstand Queen · 02-09-2009, 11:23 AM

The hose piece from the filler cap down to the water pump on the block is notorious for having leaks.

These leaks may be aggravated by worn transmission and motor mounts. Even brand new with zero mileage, these 4age's move forwards and backwards inside the engine bay. With worn mounts they positively Rock!

randomxzero · 02-09-2009, 11:26 AM

ya well i guess my 4agcame with the hose for the neck that goes up!...
the one on the block is to the side so t caused stress

tommy_mk1 · 02-09-2009, 02:32 PM

hi im new on here but i got a question k im looking for an 87 mr2 that some one is parting out i need some front end peaces . dose any one know of any junk yards that have an mr2 in it or some won selling parts.

ebouwman · 02-09-2009, 04:13 PM

Quote:

Originally Posted by tommy_mk1

hi im new on here but i got a question k im looking for an 87 mr2 that some one is parting out i need some front end peaces . dose any one know of any junk yards that have an mr2 in it or some won selling parts.

Why are you posting here?

Look in the market place

02-08-2009, 08:44 PM	#1 (permalink)
randomxzero Downshift to Reverse! Join Date: Sep 2008 Location: 562 Posts: 1,039 Thanks: 10 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	Question!! Ok so theres this part i dont know what its called on the mkI.. but its attached to the radiator hose going to the block from the filler cap!.. i got both of these of an 85 and yet they are different in the neck angle! this was causing my filler pipe to break because of the stress it was causing on it and how hot the car was getting.. Question is why are they different if its the same year! and same month production. neck angles!

02-09-2009, 02:32 PM	#7 (permalink)
tommy_mk1 No Skills Join Date: Feb 2009 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	body hi im new on here but i got a question k im looking for an 87 mr2 that some one is parting out i need some front end peaces . dose any one know of any junk yards that have an mr2 in it or some won selling parts. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-08-2009, 09:20 PM	#2 (permalink)
mr3 Cage Fighter Join Date: Jun 2008 Location: Plymouth Mtg, Pa Posts: 848 Thanks: 19 Thanked 27 Times in 26 Posts iTrader Rating: (2/100% )	Maybe it was a recall and one got replaced and the other didn't?

02-08-2009, 09:40 PM	#3 (permalink)
randomxzero Downshift to Reverse! Join Date: Sep 2008 Location: 562 Posts: 1,039 Thanks: 10 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	maybe but i found out thats why that pipe kept breaking i went through four of them!!...

02-08-2009, 11:21 PM	#4 (permalink)
ebouwman Curve Hugger Join Date: Jan 2009 Location: BC, Canada Posts: 1,391 Thanks: 18 Thanked 48 Times in 48 Posts My Google Map iTrader Rating: (0/0% )	I've heard that lots of cars have small changes to them partway through the year, lots of times it's little changes to trim. That could be what happened there, and maybe they just decided they wanted to change it. They might have also had a different bend in the rad hose to go with it though.

02-09-2009, 11:23 AM	#5 (permalink)
Jackstand Queen Cage Fighter Join Date: May 2008 Posts: 677 Thanks: 52 Thanked 56 Times in 53 Posts iTrader Rating: (1/100% )	The hose piece from the filler cap down to the water pump on the block is notorious for having leaks. These leaks may be aggravated by worn transmission and motor mounts. Even brand new with zero mileage, these 4age's move forwards and backwards inside the engine bay. With worn mounts they positively Rock!

02-09-2009, 11:26 AM	#6 (permalink)
randomxzero Downshift to Reverse! Join Date: Sep 2008 Location: 562 Posts: 1,039 Thanks: 10 Thanked 5 Times in 5 Posts iTrader Rating: (0/0% )	ya well i guess my 4agcame with the hose for the neck that goes up!... the one on the block is to the side so t caused stress