Got Rust? Need panels? (FS Mark1)

mr2tim · 09-11-2009, 10:23 AM

I "filleted" my parts car this week and have some replacement drivers and pass floors, front and rear trunk floors, sunroof frame and rocker panels if your handy and up to replacing those rusty components. (see pics)

Also, here's a update to the extensive listing of Mark 1 parts I have available to owners looking for those hard to find 20 year old parts.

If you don't have my original list of 100's of parts PM me and I'll send them along.

Thanks everyone!!

mr2tim
Supercharzed Toyz Raczing

Mark 1 parts add-on 9-6-09
(pics available just ask)

Fuel Inj ballast 85-86
Radiator lower support 85-86 only (vertical)
Air filter 87-89 (in the trunk)
Shelby 14” rims (trimmed in your color)
Pass seat, blue fabric, 87-89 series (new?)
Pass door, manual, 85-86 panel type, black, real pretty
Drs “ , “ , recoverable “
Door hinges (separate)
Replacement floor pans:
a. drs seat and forward floor
b. pass “ and “ “
c. front trunk
d. rear truck
Replacement drivers seat floor reinforcement beam w OEM seat receiving nuts
“ pass “ “ “ “ “
Complete battery holder bracket
Rt front axle assembly
a. lower arm
b. caliper
c. bearing carrier assembly
d. strut
Left front axle assembly
e. lower arm
f. caliper
g. bearing carrier assembly
h. strut

Rear valance-under the bumper with air breather holes
Rear panel- holds license plate and trunk latch
Electrical harness for chassis (include engine room fuse box)
Electrical engine harness for N/A engine
Fuse box (drivers foot area)
Complete steering column, ignition, blue wheel & lower U-joint
Dashboard reinforcement bar
Dashboard electrical harness (includes A/C hook-ups)
Automatic AT CV (half-shaft) Drs side only
Rt Rear axle assembly
a. Caliper
b. Forward Strut Bar
c. Lower control arm
d. Brake rotor

Left Rear axle assembly
e. Caliper
f. Bearing Carrier (N/A)
g. Forward Strut Bar
h. Toe-in adjuster
i. Lower control arm
j. Brake rotor
Chasis mounting bracket-rear 85-87
Chasis “ “ - rear 87-89 (these differ from 85-86)
Chasis “ “ -front left and right
Gas Fill piping to tank w cap
Rack and Pinion steering assembly
Rear Trunk Lockset 85-86 only
Temp Sensors-Engine and Radiator
Emer Brake Lever Assembly 85-86 (left side)
Engine cover Latch Trim/Garnish (2 types)
Strut cover Caps
Strut swivel top-4 bolt
Fuse Box-engine room
Gas filler tubing to tank
Dash speakers
Fuel door& trunk levers assembly (cables available)\
Upper rad straps -85-86 only (small ones)
Water filler inlet w cap
Fuel injectors 4 ea for 4a series engines
Turn signal stalk w 4 way flasher
Ignition w key –column available
Universal joint for steering column base
Gasoline overflow consolidator (bolts to firewall/engine compartment)
Fuel gauge
Water temp gauge
Alternator gauge
Brake footpedal assembly for automatic cars
Junction Box #3
Sunroof frame (perfect no rust)
Ac clutch stator (new)
Calipers (all)
Replacement Rocker panels
Fuse box (interior w harness)
A/C fuse box (pass kick area)
Defroster diverter

If you don’t see what you want write me, lots of stuff wasn’t inventoried and small parts are available to Club Members Only !

espguitarist33 · 09-16-2009, 10:13 PM

how much/ what do those wheels look like?

quarter panels for sale?

mr2tim · 09-19-2009, 04:09 PM

I have used 14"x10"wide Goodyear Sportsman racing slicks on these rims for years.

I'll offer to paint these rim inserts the color you need!

(Sorry bro all fenders are gone.)

Need rocker panels?

**********************************************
Opps!!!Club Website is broken and pictures cannot upload presently.!!!
************************************************
PM me with a email and I'll forward.

Thanks Bro

Quote:

Originally Posted by espguitarist33

how much/ what do those wheels look like?

quarter panels for sale?

09-11-2009, 10:23 AM	#1 (permalink)
mr2tim SUPERcharZed ToyZ RacZer Join Date: Mar 2008 Location: South Florida Posts: 690 Thanks: 2 Thanked 41 Times in 38 Posts My Google Map iTrader Rating: (2/100% )	Got Rust? Need panels? (FS Mark1) I "filleted" my parts car this week and have some replacement drivers and pass floors, front and rear trunk floors, sunroof frame and rocker panels if your handy and up to replacing those rusty components. (see pics) Also, here's a update to the extensive listing of Mark 1 parts I have available to owners looking for those hard to find 20 year old parts. If you don't have my original list of 100's of parts PM me and I'll send them along. Thanks everyone!! mr2tim Supercharzed Toyz Raczing Mark 1 parts add-on 9-6-09 (pics available just ask) Fuel Inj ballast 85-86 Radiator lower support 85-86 only (vertical) Air filter 87-89 (in the trunk) Shelby 14” rims (trimmed in your color) Pass seat, blue fabric, 87-89 series (new?) Pass door, manual, 85-86 panel type, black, real pretty Drs “ , “ , recoverable “ Door hinges (separate) Replacement floor pans: a. drs seat and forward floor b. pass “ and “ “ c. front trunk d. rear truck Replacement drivers seat floor reinforcement beam w OEM seat receiving nuts “ pass “ “ “ “ “ Complete battery holder bracket Rt front axle assembly a. lower arm b. caliper c. bearing carrier assembly d. strut Left front axle assembly e. lower arm f. caliper g. bearing carrier assembly h. strut Rear valance-under the bumper with air breather holes Rear panel- holds license plate and trunk latch Electrical harness for chassis (include engine room fuse box) Electrical engine harness for N/A engine Fuse box (drivers foot area) Complete steering column, ignition, blue wheel & lower U-joint Dashboard reinforcement bar Dashboard electrical harness (includes A/C hook-ups) Automatic AT CV (half-shaft) Drs side only Rt Rear axle assembly a. Caliper b. Forward Strut Bar c. Lower control arm d. Brake rotor Left Rear axle assembly e. Caliper f. Bearing Carrier (N/A) g. Forward Strut Bar h. Toe-in adjuster i. Lower control arm j. Brake rotor Chasis mounting bracket-rear 85-87 Chasis “ “ - rear 87-89 (these differ from 85-86) Chasis “ “ -front left and right Gas Fill piping to tank w cap Rack and Pinion steering assembly Rear Trunk Lockset 85-86 only Temp Sensors-Engine and Radiator Emer Brake Lever Assembly 85-86 (left side) Engine cover Latch Trim/Garnish (2 types) Strut cover Caps Strut swivel top-4 bolt Fuse Box-engine room Gas filler tubing to tank Dash speakers Fuel door& trunk levers assembly (cables available)\ Upper rad straps -85-86 only (small ones) Water filler inlet w cap Fuel injectors 4 ea for 4a series engines Turn signal stalk w 4 way flasher Ignition w key –column available Universal joint for steering column base Gasoline overflow consolidator (bolts to firewall/engine compartment) Fuel gauge Water temp gauge Alternator gauge Brake footpedal assembly for automatic cars Junction Box #3 Sunroof frame (perfect no rust) Ac clutch stator (new) Calipers (all) Replacement Rocker panels Fuse box (interior w harness) A/C fuse box (pass kick area) Defroster diverter If you don’t see what you want write me, lots of stuff wasn’t inventoried and small parts are available to Club Members Only ! Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-16-2009, 10:13 PM	#2 (permalink)
espguitarist33 Cage Fighter Join Date: Nov 2008 Location: west chester PA Posts: 415 Thanks: 4 Thanked 5 Times in 5 Posts iTrader Rating: (2/100% )	how much/ what do those wheels look like? quarter panels for sale?