Clutch sounds

astark02 · 09-28-2009, 03:03 AM

At idle or whenever I let go of the clutch it makes a weird ticking sound, but when I push it in; it goes away. Please help me figure out what this problem is. Thanks!

skruyd · 09-28-2009, 09:40 AM

Most likely your throw out bearing is going out. Do you know if the clutch has ever been replaced???

espguitarist33 · 09-28-2009, 11:22 AM

that sounds wierd for a throwout bearing since when he isnt on the pedal it makes sounds...could a rivet or something be broken on the disk maybe?

mr2_jake · 09-28-2009, 11:55 AM

Mine did it as well. Throw out bearing. Even when the pedal is out, the throw out bearing may make slight contact with the pressure plate.

potatoe · 10-07-2009, 05:15 AM

yeah, my 2 makes an odd clicking sound when im idleing, but ive never noticed it when im letting the clutch out or driving.

dirocyn · 10-07-2009, 10:58 AM

My old diesel pickup does that, noisy input bearings (normal in GM manual transmissions) rattle with the clutch out in neutral. The throw-out bearing in my MR2 (which has taken me off the road) does the opposite, the noise starts when the clutch is depressed and goes away when the clutch is all the way out.

Wear in the input bearing/shaft is not unusual for C50 transmissions, it's the same design issue that causes 5th gear pop out. It will probably do ok in this condition for many moons.

fvillota · 10-07-2009, 12:10 PM

throwout bearing. mine does itttttttt sucks!

09-28-2009, 03:03 AM	#1 (permalink)
astark02 No Skills Join Date: Aug 2009 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Clutch sounds At idle or whenever I let go of the clutch it makes a weird ticking sound, but when I push it in; it goes away. Please help me figure out what this problem is. Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-28-2009, 09:40 AM	#2 (permalink)
skruyd 5th Gear Join Date: Sep 2009 Location: Middle TN Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Most likely your throw out bearing is going out. Do you know if the clutch has ever been replaced???

09-28-2009, 11:22 AM	#3 (permalink)
espguitarist33 Cage Fighter Join Date: Nov 2008 Location: west chester PA Posts: 415 Thanks: 4 Thanked 5 Times in 5 Posts iTrader Rating: (2/100% )	that sounds wierd for a throwout bearing since when he isnt on the pedal it makes sounds...could a rivet or something be broken on the disk maybe?

09-28-2009, 11:55 AM	#4 (permalink)
mr2_jake Many skills... Join Date: Sep 2009 Location: Billings, MT Posts: 83 Thanks: 0 Thanked 7 Times in 7 Posts iTrader Rating: (0/0% )	Mine did it as well. Throw out bearing. Even when the pedal is out, the throw out bearing may make slight contact with the pressure plate.

10-07-2009, 05:15 AM	#5 (permalink)
potatoe No Skills Join Date: Jun 2009 Location: san marcos, ca Posts: 46 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	yeah, my 2 makes an odd clicking sound when im idleing, but ive never noticed it when im letting the clutch out or driving.

10-07-2009, 10:58 AM	#6 (permalink)
dirocyn Cage Fighter Join Date: Mar 2009 Posts: 133 Thanks: 6 Thanked 12 Times in 12 Posts iTrader Rating: (0/0% )	My old diesel pickup does that, noisy input bearings (normal in GM manual transmissions) rattle with the clutch out in neutral. The throw-out bearing in my MR2 (which has taken me off the road) does the opposite, the noise starts when the clutch is depressed and goes away when the clutch is all the way out. Wear in the input bearing/shaft is not unusual for C50 transmissions, it's the same design issue that causes 5th gear pop out. It will probably do ok in this condition for many moons.

10-07-2009, 12:10 PM	#7 (permalink)
fvillota Cage Fighter Join Date: Feb 2008 Location: MIami Posts: 1,832 Thanks: 65 Thanked 28 Times in 28 Posts iTrader Rating: (6/100% )	throwout bearing. mine does itttttttt sucks!