vacuum line, heater controls help!

como · 10-25-2009, 01:48 PM

ok, i took apart my entire dash and had it all out, and now im putting it back in.

theres a vacuume line that pokes through from the frunk, right over the gas pedal mount, near the top/side of the heater core box... that line, best i can figure, is supposed to have a vaccume on it (from the manifold?)
i cant see/feel where it connects to, nor do i have any idea.
without it, the heater core on/off valve wont switch, so id like to have it!
cant find a diagram in the bgb or haynes...

como · 10-25-2009, 03:10 PM

nevermind

ToyoDIY.com

The little nub was pointing straight up instead of the logical direction of towards the hose it was needing

10-25-2009, 01:48 PM	#1 (permalink)
como Road Warrior Join Date: Jan 2009 Location: Southern Maine Posts: 520 Thanks: 13 Thanked 8 Times in 7 Posts iTrader Rating: (2/100% )	vacuum line, heater controls help! ok, i took apart my entire dash and had it all out, and now im putting it back in. theres a vacuume line that pokes through from the frunk, right over the gas pedal mount, near the top/side of the heater core box... that line, best i can figure, is supposed to have a vaccume on it (from the manifold?) i cant see/feel where it connects to, nor do i have any idea. without it, the heater core on/off valve wont switch, so id like to have it! cant find a diagram in the bgb or haynes...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-25-2009, 03:10 PM	#2 (permalink)
como Road Warrior Join Date: Jan 2009 Location: Southern Maine Posts: 520 Thanks: 13 Thanked 8 Times in 7 Posts iTrader Rating: (2/100% )	nevermind ToyoDIY.com The little nub was pointing straight up instead of the logical direction of towards the hose it was needing