Rear Arches

fillpoke · 10-28-2009, 04:40 PM

Hi All. Sorry if this question has been asked before. I've looked all over but can't find an answer hence this question. I need to replace my rear arches and for various reasons I need to do it as cheaply as possible. So I want to use pattern panels (such as those from Hadrian Panels). Since I can't get any specifically made for the MR2 mark 1 I'm asking which are the best fit? I know Datsun cherry are pretty close but is there anything better? I know various clubs can provide panels but they cost more than I can afford at the moment.

rkeetle · 10-29-2009, 10:18 AM

You might see if the twosrus.com arches will be the best option for your replacement

I have the same issue. Let me know how you do it.

Roger

fillpoke · 10-29-2009, 03:37 PM

These are the panels I'm not using because of their cost.

mr3 · 10-29-2009, 10:04 PM

Go with custom? Get some steel, a welder, and a hammer and go to town? Thats what I did and I think I did a pretty decent job. I'm no body guy and I didnt want perfect so it is what it is.

Ghost · 10-29-2009, 10:51 PM

Which one do you need? I have a good driver side I can cut out. Just pay for shipping and send me a pic of where would you like me to cut them out.

fillpoke · 11-02-2009, 04:00 PM

Thanks very much ghost. Wish I'd looked at this earlier. Have just bought a pair of pattern Datsun Cherry arches as I'm told these are pretty close.

rkeetle · 11-02-2009, 05:49 PM

Thank you for starting this post. Were do you get Datsun Cherry Arches?

Thank you for the time and talent.

fillpoke · 11-12-2009, 04:48 PM

Got the Cherry arches from Cleveland Panels in Middlesbrough. The pair cost £36.

scottohno · 11-13-2009, 01:14 AM

hey do you still have the panel? where are you located? i need both sides. i live in chicago and senior dos has salt cancer :'(

10-28-2009, 04:40 PM	#1 (permalink)
fillpoke No Skills Join Date: Oct 2009 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Rear Arches Hi All. Sorry if this question has been asked before. I've looked all over but can't find an answer hence this question. I need to replace my rear arches and for various reasons I need to do it as cheaply as possible. So I want to use pattern panels (such as those from Hadrian Panels). Since I can't get any specifically made for the MR2 mark 1 I'm asking which are the best fit? I know Datsun cherry are pretty close but is there anything better? I know various clubs can provide panels but they cost more than I can afford at the moment.

10-29-2009, 10:18 AM	#2 (permalink)
rkeetle Always wanted one Join Date: Oct 2009 Location: Lincoln, NE Posts: 11 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Look at Twosrus.com for arch replacements You might see if the twosrus.com arches will be the best option for your replacement I have the same issue. Let me know how you do it. Roger

11-02-2009, 05:49 PM	#7 (permalink)
rkeetle Always wanted one Join Date: Oct 2009 Location: Lincoln, NE Posts: 11 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	How do you get Datsun Cherry Arches? Thank you for starting this post. Were do you get Datsun Cherry Arches? Thank you for the time and talent.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-29-2009, 03:37 PM	#3 (permalink)
fillpoke No Skills Join Date: Oct 2009 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	These are the panels I'm not using because of their cost.

10-29-2009, 10:04 PM	#4 (permalink)
mr3 Cage Fighter Join Date: Jun 2008 Location: Plymouth Mtg, Pa Posts: 848 Thanks: 19 Thanked 26 Times in 25 Posts iTrader Rating: (2/100% )	Go with custom? Get some steel, a welder, and a hammer and go to town? Thats what I did and I think I did a pretty decent job. I'm no body guy and I didnt want perfect so it is what it is.

10-29-2009, 10:51 PM	#5 (permalink)
Ghost Some Skills Join Date: Mar 2007 Posts: 65 Thanks: 5 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Which one do you need? I have a good driver side I can cut out. Just pay for shipping and send me a pic of where would you like me to cut them out.

11-02-2009, 04:00 PM	#6 (permalink)
fillpoke No Skills Join Date: Oct 2009 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Thanks very much ghost. Wish I'd looked at this earlier. Have just bought a pair of pattern Datsun Cherry arches as I'm told these are pretty close.

11-12-2009, 04:48 PM	#8 (permalink)
fillpoke No Skills Join Date: Oct 2009 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Got the Cherry arches from Cleveland Panels in Middlesbrough. The pair cost £36.

11-13-2009, 01:14 AM	#9 (permalink)
scottohno Cage Fighter Join Date: Feb 2009 Location: Orland Park, IL Posts: 127 Thanks: 5 Thanked 2 Times in 2 Posts iTrader Rating: (0/0% )	hey do you still have the panel? where are you located? i need both sides. i live in chicago and senior dos has salt cancer :'(