Rogue headlight question

AFBujinkan · 06-26-2009, 12:00 AM

This is for Kurdain/anyone else using the Rogue headlight conversion. I've noticed in several different pictures of the system that one side or the other has a sort of sleepy or lazy eye look. One or the other will seem to either droop down or to the side a bit; I was wondering if this is normal and if it affects the beam pattern to any real extent. Also, are there adjustment/aiming screws in the new shrouds? I haven't been able to tell from the pics I've seen.

Any knowledgeable comments appreciated, thanks!

Kurdain · 07-03-2009, 02:51 PM

Not entirely clear on what you are asking.
Both sides will be equal and look teh same as far as height, spacing, etc...
Also there is adjustments that can be made to correct any alignment issues, after all these are 15+ year old cars and each is slightly different.

Shoot me an e-mail of give me a call after 7:30PM, Pacific and I can try and help further.
I also have some other pictures I can send you if you like.

I have a pic on here as well:
http://www.mr2.com/forums/turbo-3s-g...ics-graph.html post #3.

Let me know if I can help further, I also have a couple more kits left for sale.

esreveRBackwards · 07-15-2009, 02:33 PM

Not trying to thread jack... anyone that has a source for the rogue kit for an mk1 p/m me? I have an idea that incorporates the look of the headlights in Imageshack - leads1ca8.jpg - Uploaded by kurdain for my mk1. Thx!

Oteck · 07-15-2009, 02:48 PM

I havent gotten time to fix mine but my passenger side is higher than the driver side even with the bump stop all the way down.

Also there is no rev6 for mk1s

06-26-2009, 12:00 AM	#1 (permalink)
AFBujinkan I'm going in for guns! Join Date: Jun 2006 Location: Las Vegas, NV Posts: 226 Thanks: 8 Thanked 3 Times in 3 Posts My Google Map iTrader Rating: (2/100% )	Rogue headlight question This is for Kurdain/anyone else using the Rogue headlight conversion. I've noticed in several different pictures of the system that one side or the other has a sort of sleepy or lazy eye look. One or the other will seem to either droop down or to the side a bit; I was wondering if this is normal and if it affects the beam pattern to any real extent. Also, are there adjustment/aiming screws in the new shrouds? I haven't been able to tell from the pics I've seen. Any knowledgeable comments appreciated, thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-03-2009, 02:51 PM	#2 (permalink)
Kurdain Cage Fighter Join Date: Oct 2006 Posts: 685 Thanks: 39 Thanked 35 Times in 29 Posts iTrader Rating: (9/100% )	Not entirely clear on what you are asking. Both sides will be equal and look teh same as far as height, spacing, etc... Also there is adjustments that can be made to correct any alignment issues, after all these are 15+ year old cars and each is slightly different. Shoot me an e-mail of give me a call after 7:30PM, Pacific and I can try and help further. I also have some other pictures I can send you if you like. I have a pic on here as well: http://www.mr2.com/forums/turbo-3s-g...ics-graph.html post #3. Let me know if I can help further, I also have a couple more kits left for sale.

07-15-2009, 02:33 PM	#3 (permalink)
esreveRBackwards Cage Fighter Join Date: Jul 2008 Posts: 102 Thanks: 23 Thanked 3 Times in 3 Posts iTrader Rating: (0/0% )	Not trying to thread jack... anyone that has a source for the rogue kit for an mk1 p/m me? I have an idea that incorporates the look of the headlights in Imageshack - leads1ca8.jpg - Uploaded by kurdain for my mk1. Thx!

07-15-2009, 02:48 PM	#4 (permalink)
Oteck Eye'm the Str⑨ngest Join Date: Aug 2005 Location: Burnaby B.C. Posts: 4,945 Thanks: 11 Thanked 172 Times in 157 Posts Blog Entries: 3 iTrader Rating: (5/100% )	I havent gotten time to fix mine but my passenger side is higher than the driver side even with the bump stop all the way down. Also there is no rev6 for mk1s