GI: what do you guys want in carbon fiber? - Page 2

rousegk7 · 09-19-2008, 09:54 AM

I know Jazz, but if this goes through, anything I send you I would buy in cf anyways

jazzcornet · 09-19-2008, 10:08 AM

Well, that's two of us. We need more interest to make it worth while. Of course, if all else fails, I'll split the cost with you to have the molds made and we can have some custom pieces! I really want every single piece in myinterior to be green carbon kevlar (except the carpet and seats of course. I'm thinking about even doing the headliner in carbon!!

rousegk7 · 09-19-2008, 12:11 PM

A headliner would be sick lol, I was planning on getting it done in black suede this winter anyways, so cf another idea.

Like I posted before, I am completely re-doing my entire mr2 so I am open to new ideas.

I would def. like the entire gauge trim etc in cf, and door cards would be awesome. Keep me posted about your ideas, and like I said I can pretty much get you any piece you would want/need.

If you still have my number/email give me a call or email me or I can pm them to you.

Timmy91t · 09-19-2008, 12:51 PM

Quote:

Originally Posted by jazzcornet

Rouse, you are aware that if we use your interior parts to make molds with, they will be destroyed?

And yes, as soon as I can source a sunroof, I will have a mold made for carbon fiber

Jazz I have a cracked one im not sure if you could still use it

jazzcornet · 09-19-2008, 03:21 PM

i need an extremely good condition sunroof to use for the mold or it may not it fit right. thanks for your generousity though

ZMR2 · 09-19-2008, 06:12 PM

Quote:

Originally Posted by jazzcornet

i need an extremely good condition sunroof to use for the mold or it may not it fit right. thanks for your generousity though

I have one form a parts car im getting rid of. 50$ let me know Im in Lancaster PA... pm me

jazzcornet · 09-25-2008, 03:05 PM

i'm about to post a GI: thread on the carbon sunroof. the next parts i will go with are the remaining dash insert pieces; shifter surround, drivers air vent surround, guage cluster surround, guage cluster insert, and possibly steering column surround.

are there any other ideas we can throw out there?

Basement Digital · 09-25-2008, 03:19 PM

Quote:

Originally Posted by jazzcornet

are there any other ideas we can throw out there?

A CF chassis would be nice.

jazzcornet · 09-25-2008, 03:39 PM

i can see it now, a thread titled: went to the track today and snapped my chassis.....

rousegk7 · 09-25-2008, 04:04 PM

door skins ftmfw!

jazzcornet · 09-29-2008, 07:25 PM

hmmm...perhaps. i do have a few laying around here. but the weight savings wouldn't be very much and the shipping would be attrocious

Everett · 09-29-2008, 07:49 PM

I'm down for some interior pieces. Body parts IMO would cost too much for me, and have a better chance of getting messed up.

miracleman89 · 09-29-2008, 07:53 PM

How about a nice custom made frunk tub??? Basically clean up the frunk area and make it look nice!!!

jazzcornet · 09-30-2008, 01:04 PM

like the factory frunk lining? that's a possibility

metheores · 09-30-2008, 01:23 PM

o_O ain't that where the spare goes? it will crack like *snap*

jazzcornet · 09-30-2008, 01:50 PM

i dont think its meant for people who dd their car. personally, i wouldnt want any cf stuff on my car if i drove it every day

Basement Digital · 09-30-2008, 10:38 PM

Honestly, the only part I've ever really wanted in CF is the MADPSI wiper cowl. Don't ask me why.

6xxx · 09-30-2008, 11:34 PM

complete the other side of the dash for the pure sex pod!!!!!!! and then CF panels!!

miracleman89 · 09-30-2008, 11:45 PM

Yes like the OEM liner but instead making it to hold a spare just make for looks and clean up the frunk! Good for an amp or whatever!

Actually a design similar to this would be perfect!!
http://www.mr2.com/forums/vbpgimage....9&d=1129162560

jazzcornet · 10-02-2008, 02:44 PM

the rest of the dash is in the works but shhhh, dont tell anyone.

miracleman, i would love to do that piece in carbon. as well as the radiator shield!!! that would be a pretty nifty idea

View Poll Results: what do you want in carbon fiber?
dash insert	12	13.33%
complete interior	26	28.89%
complete dash	21	23.33%
body parts	55	61.11%
Multiple Choice Poll. Voters: 90. You may not vote on this poll

09-30-2008, 11:45 PM	#39 (permalink)
miracleman89 MR2 under construction! Join Date: Mar 2008 Location: Morenci, AZ Posts: 453 Thanks: 18 Thanked 7 Times in 6 Posts iTrader Rating: (0/0% )	Yes like the OEM liner but instead making it to hold a spare just make for looks and clean up the frunk! Good for an amp or whatever! Actually a design similar to this would be perfect!! http://www.mr2.com/forums/vbpgimage....9&d=1129162560 Last edited by miracleman89; 10-01-2008 at 01:22 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-19-2008, 09:54 AM	#21 (permalink)
rousegk7 Cage Fighter Join Date: Mar 2007 Posts: 322 Thanks: 15 Thanked 9 Times in 9 Posts iTrader Rating: (5/100% )	I know Jazz, but if this goes through, anything I send you I would buy in cf anyways

09-19-2008, 10:08 AM	#22 (permalink)
jazzcornet Gi_Shu_Som Powdercoating Join Date: Nov 2006 Location: newport news, va Posts: 1,683 Thanks: 19 Thanked 60 Times in 50 Posts My Google Map iTrader Rating: (15/100% )	Well, that's two of us. We need more interest to make it worth while. Of course, if all else fails, I'll split the cost with you to have the molds made and we can have some custom pieces! I really want every single piece in myinterior to be green carbon kevlar (except the carpet and seats of course. I'm thinking about even doing the headliner in carbon!!

09-19-2008, 12:11 PM	#23 (permalink)
rousegk7 Cage Fighter Join Date: Mar 2007 Posts: 322 Thanks: 15 Thanked 9 Times in 9 Posts iTrader Rating: (5/100% )	A headliner would be sick lol, I was planning on getting it done in black suede this winter anyways, so cf another idea. Like I posted before, I am completely re-doing my entire mr2 so I am open to new ideas. I would def. like the entire gauge trim etc in cf, and door cards would be awesome. Keep me posted about your ideas, and like I said I can pretty much get you any piece you would want/need. If you still have my number/email give me a call or email me or I can pm them to you.

09-19-2008, 03:21 PM	#25 (permalink)
jazzcornet Gi_Shu_Som Powdercoating Join Date: Nov 2006 Location: newport news, va Posts: 1,683 Thanks: 19 Thanked 60 Times in 50 Posts My Google Map iTrader Rating: (15/100% )	i need an extremely good condition sunroof to use for the mold or it may not it fit right. thanks for your generousity though

09-25-2008, 03:05 PM	#27 (permalink)
jazzcornet Gi_Shu_Som Powdercoating Join Date: Nov 2006 Location: newport news, va Posts: 1,683 Thanks: 19 Thanked 60 Times in 50 Posts My Google Map iTrader Rating: (15/100% )	i'm about to post a GI: thread on the carbon sunroof. the next parts i will go with are the remaining dash insert pieces; shifter surround, drivers air vent surround, guage cluster surround, guage cluster insert, and possibly steering column surround. are there any other ideas we can throw out there?

09-25-2008, 03:39 PM	#29 (permalink)
jazzcornet Gi_Shu_Som Powdercoating Join Date: Nov 2006 Location: newport news, va Posts: 1,683 Thanks: 19 Thanked 60 Times in 50 Posts My Google Map iTrader Rating: (15/100% )	i can see it now, a thread titled: went to the track today and snapped my chassis.....

09-25-2008, 04:04 PM	#30 (permalink)
rousegk7 Cage Fighter Join Date: Mar 2007 Posts: 322 Thanks: 15 Thanked 9 Times in 9 Posts iTrader Rating: (5/100% )	door skins ftmfw!

09-29-2008, 07:25 PM	#31 (permalink)
jazzcornet Gi_Shu_Som Powdercoating Join Date: Nov 2006 Location: newport news, va Posts: 1,683 Thanks: 19 Thanked 60 Times in 50 Posts My Google Map iTrader Rating: (15/100% )	hmmm...perhaps. i do have a few laying around here. but the weight savings wouldn't be very much and the shipping would be attrocious

09-29-2008, 07:49 PM	#32 (permalink)
Everett Lovin' the curves! Join Date: Aug 2006 Location: Decatur,IL/Solomons,MD Posts: 1,422 Thanks: 42 Thanked 59 Times in 55 Posts My Google Map iTrader Rating: (7/100% )	I'm down for some interior pieces. Body parts IMO would cost too much for me, and have a better chance of getting messed up.

09-29-2008, 07:53 PM	#33 (permalink)
miracleman89 MR2 under construction! Join Date: Mar 2008 Location: Morenci, AZ Posts: 453 Thanks: 18 Thanked 7 Times in 6 Posts iTrader Rating: (0/0% )	How about a nice custom made frunk tub??? Basically clean up the frunk area and make it look nice!!!

09-30-2008, 01:04 PM	#34 (permalink)
jazzcornet Gi_Shu_Som Powdercoating Join Date: Nov 2006 Location: newport news, va Posts: 1,683 Thanks: 19 Thanked 60 Times in 50 Posts My Google Map iTrader Rating: (15/100% )	like the factory frunk lining? that's a possibility

09-30-2008, 01:23 PM	#35 (permalink)
metheores Supreme! Join Date: Feb 2008 Location: Boston, MA Posts: 683 Thanks: 38 Thanked 16 Times in 16 Posts iTrader Rating: (1/100% )	o_O ain't that where the spare goes? it will crack like snap

09-30-2008, 01:50 PM	#36 (permalink)
jazzcornet Gi_Shu_Som Powdercoating Join Date: Nov 2006 Location: newport news, va Posts: 1,683 Thanks: 19 Thanked 60 Times in 50 Posts My Google Map iTrader Rating: (15/100% )	i dont think its meant for people who dd their car. personally, i wouldnt want any cf stuff on my car if i drove it every day

09-30-2008, 10:38 PM	#37 (permalink)
Basement Digital MR2 Loner Join Date: Jan 2008 Location: Portland, OR Posts: 340 Thanks: 47 Thanked 26 Times in 11 Posts Blog Entries: 1 iTrader Rating: (1/100% )	Honestly, the only part I've ever really wanted in CF is the MADPSI wiper cowl. Don't ask me why.

09-30-2008, 11:34 PM	#38 (permalink)
6xxx BMXer Join Date: Mar 2007 Posts: 162 Thanks: 0 Thanked 4 Times in 4 Posts iTrader Rating: (0/0% )	complete the other side of the dash for the pure sex pod!!!!!!! and then CF panels!!

10-02-2008, 02:44 PM	#40 (permalink)
jazzcornet Gi_Shu_Som Powdercoating Join Date: Nov 2006 Location: newport news, va Posts: 1,683 Thanks: 19 Thanked 60 Times in 50 Posts My Google Map iTrader Rating: (15/100% )	the rest of the dash is in the works but shhhh, dont tell anyone. miracleman, i would love to do that piece in carbon. as well as the radiator shield!!! that would be a pretty nifty idea