What other oem seats would fit in a mr2? - Page 2

JMcInnis · 09-13-2006, 06:13 AM

I think all other seat require modifications to the brackets. I dont like the s2000 seats, I dont think they are all quite that confortable.

Hellstorm · 09-14-2006, 04:23 PM

So the RSX and the s2k seats bolt right in without modification right?

canadam · 09-14-2006, 04:32 PM

I highly doubt the seat mounts line up.

Quote:

Originally Posted by Hellstorm

So the RSX and the s2k seats bolt right in without modification right?

poppin3000 · 09-14-2006, 06:14 PM

here are some pictures of a norcal owner Tommy's s2000 seats and the fab process

http://www.norcalmr2.com/tom-mr2-s20...2000seats.html

Taneo22 · 09-14-2006, 08:31 PM

Quote:

Originally Posted by poppin3000

here are some pictures of a norcal owner Tommy's s2000 seats and the fab process

http://www.norcalmr2.com/tom-mr2-s20...2000seats.html

Great job!!! Just go's to show what a little effort, tools and know how can do for you.
Good work.

Just Wong It · 09-15-2006, 03:52 PM

Quote:

Originally Posted by poppin3000

here are some pictures of a norcal owner Tommy's s2000 seats and the fab process

http://www.norcalmr2.com/tom-mr2-s20...2000seats.html

man i was lookin for that link for a long ass time thank you =]

91_two · 09-21-2006, 06:37 PM

Do any of these make the seats sit higher up? I have my OEM 91 seats on the ground and still sit to high for me I hate it.

masagsxr · 02-20-2009, 12:16 AM

Quote:

Originally Posted by Just Wong It

I think the RSX leather seats looks best in mr2s..

Are these pretty much plug and play or I need to disassemble the bracket/rails of my mr2 seats?

Anyone? Thanks!!!

Parkins · 02-26-2009, 02:00 PM

Hey, would seats from a 1990-92 Celica fit easily into a mk1?

Basement Digital · 02-26-2009, 02:50 PM

Quote:

Originally Posted by imweip

I have 2000+ celica seats in my car, but it took extensive modification to put them in.

Exactly why I sold the celica seats I purchased.

They sure fit the interior well in my opinion though.

Lee_91MR2 · 03-06-2009, 02:03 PM

would mk3 mr2 seats be plug and play for a mk2? i found a set of mk3 mr2 leathers for $60 in real good condition.

and how about the RSX seats? what kind of modification would i need to do to get them to fit in my mk2?

Lee_91MR2 · 03-08-2009, 03:04 PM

Quote:

Originally Posted by Lee_91MR2

would mk3 mr2 seats be plug and play for a mk2? i found a set of mk3 mr2 leathers for $60 in real good condition.

and how about the RSX seats? what kind of modification would i need to do to get them to fit in my mk2?

TonyHuynhTwo · 08-31-2009, 09:25 PM

The Type-S RSX seat bolts right into an mk2. You don't even have to switch the brackets. The two holes in the front line up with the RSX seat and only one in the back (which is more than enough to keep the seat bolted in even in the worst crash). The side doesn't bolt up but I never really knew why the hole was there in the first place. It's attached to the thinnest bracket, which in turn is clumsily bolted onto the seat.

I have a set of Black Type-S RSX seats for sale. They both have tears at the bottom Which is a shame because without those blemishes they are flawless. I'm inLancaster, PA. So shoot me a PM or E-mail me at TonyHuynhTwo@aol.com.

I sold a passenger side seat to a member of the forum a while back for $200. I can't remember who it was but he also wanted the driver's side. So if that was you I got the drivers side seat if you still wanted it. I would like to sell it as a set but for you I'll hand off the drivers side for only $100 because of the tear. Otherwise they are going to be sold as a set for $200. Pictures coming soon.

Basement Digital · 11-06-2009, 12:48 AM

Quote:

Originally Posted by TonyHuynhTwo

The Type-S RSX seat bolts right into an mk2. You don't even have to switch the brackets. The two holes in the front line up with the RSX seat and only one in the back (which is more than enough to keep the seat bolted in even in the worst crash). The side doesn't bolt up but I never really knew why the hole was there in the first place. It's attached to the thinnest bracket, which in turn is clumsily bolted onto the seat.

I'm surprised this post didn't get more attention. They fit with no modification; really? Ever get pics?

TonyHuynhTwo · 11-22-2009, 03:33 PM

I only have a picture of the passenger side seat in the car. I sold them so I could work on another project before I could take a lot of pictures of them. PM me for the pic. They are pretty pricey though I sold mine for $350 with tears.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-13-2006, 06:13 AM	#21 (permalink)
JMcInnis No Skills Join Date: Sep 2006 Posts: 37 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	I think all other seat require modifications to the brackets. I dont like the s2000 seats, I dont think they are all quite that confortable.

09-14-2006, 04:23 PM	#22 (permalink)
Hellstorm I Bet I Can Break It. Join Date: Sep 2006 Location: The Woodlands, Texas Posts: 734 Thanks: 12 Thanked 9 Times in 3 Posts iTrader Rating: (7/100% )	So the RSX and the s2k seats bolt right in without modification right?

09-14-2006, 06:14 PM	#24 (permalink)
poppin3000 ///Mr2 Join Date: Mar 2006 Location: Fremont, CA Posts: 24 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	here are some pictures of a norcal owner Tommy's s2000 seats and the fab process http://www.norcalmr2.com/tom-mr2-s20...2000seats.html

09-21-2006, 06:37 PM	#27 (permalink)
91_two No Skills Join Date: Jul 2006 Posts: 184 Thanks: 1 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	Do any of these make the seats sit higher up? I have my OEM 91 seats on the ground and still sit to high for me I hate it.

02-26-2009, 02:00 PM	#29 (permalink)
Parkins No Skills Join Date: Feb 2009 Location: Boulder, CO Posts: 38 Thanks: 1 Thanked 1 Time in 1 Post My Google Map iTrader Rating: (0/0% )	Hey, would seats from a 1990-92 Celica fit easily into a mk1?

03-06-2009, 02:03 PM	#31 (permalink)
Lee_91MR2 Cage Fighter Join Date: Feb 2009 Location: Arkansas Posts: 144 Thanks: 6 Thanked 2 Times in 2 Posts iTrader Rating: (0/0% )	would mk3 mr2 seats be plug and play for a mk2? i found a set of mk3 mr2 leathers for $60 in real good condition. and how about the RSX seats? what kind of modification would i need to do to get them to fit in my mk2?

08-31-2009, 09:25 PM	#33 (permalink)
TonyHuynhTwo Some Skills Join Date: Feb 2009 Posts: 52 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	The Type-S RSX seat bolts right into an mk2. You don't even have to switch the brackets. The two holes in the front line up with the RSX seat and only one in the back (which is more than enough to keep the seat bolted in even in the worst crash). The side doesn't bolt up but I never really knew why the hole was there in the first place. It's attached to the thinnest bracket, which in turn is clumsily bolted onto the seat. I have a set of Black Type-S RSX seats for sale. They both have tears at the bottom Which is a shame because without those blemishes they are flawless. I'm inLancaster, PA. So shoot me a PM or E-mail me at TonyHuynhTwo@aol.com. I sold a passenger side seat to a member of the forum a while back for $200. I can't remember who it was but he also wanted the driver's side. So if that was you I got the drivers side seat if you still wanted it. I would like to sell it as a set but for you I'll hand off the drivers side for only $100 because of the tear. Otherwise they are going to be sold as a set for $200. Pictures coming soon.

11-22-2009, 03:33 PM	#35 (permalink)
TonyHuynhTwo Some Skills Join Date: Feb 2009 Posts: 52 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (1/100% )	I only have a picture of the passenger side seat in the car. I sold them so I could work on another project before I could take a lot of pictures of them. PM me for the pic. They are pretty pricey though I sold mine for $350 with tears.