Black pearl Toyota emblem - will the Supra one fit?

mthreat · 02-23-2008, 06:51 AM

Hey Aaron,

I've been looking for the "smoke" or "black pearl" colored Toyota emblems for the front and rear of the MR2. I think they used this emblem on the JDM anniversary edition or something, but these may be hard to find.

But I recently noticed that the USDM Supra anniversary edition also had a black pearl Toyota emblem -- can you get these, and do you know if they would fit on an MR2?

te51levin · 02-23-2008, 03:47 PM

I don't know whether it would fit or not. In fact, I'm not sure whether I can get it or not, since I can't seem to find it. What year Supra got that package?

mthreat · 02-23-2008, 08:27 PM

It looks like the 1997 model was the "15th anniversary edition", I just did some google searching and they seem to have the darker colored emblems on the front and rear.

te51levin · 02-24-2008, 11:53 AM

That's really weird. I looked through the EPC and it showed the same emblem for all JZA Supras. I also trie the accessory book and it showed nothing. I'll take another look and see what comes up.

mthreat · 02-24-2008, 07:57 PM

Quote:

Originally Posted by te51levin

That's really weird. I looked through the EPC and it showed the same emblem for all JZA Supras. I also trie the accessory book and it showed nothing. I'll take another look and see what comes up.

Ok.. it's possible that all MkIV Supras had the black pearl color. I guess the EPC catalog just has the black & white diagrams so it's hard to tell the color. What's the price for the rear Toyota emblem for the supra? I could just try it... although if I remove my current emblem and the new one doesn't fit, then I'd have to get a new MR2 emblem or try and replace the double-sided tape on it.

PHOENIX · 02-24-2008, 08:07 PM

mthreat - I was able to find the part number (and have 1 in my posession) the front gunmetal 10th anniversary MR2 emblem (im not selling it). However, the rear emblem has eluded me, after several attempts with part numbers (ordering them), i have given up on the rear emblem.

When I get home, if you would like, I can post the part number for the front to see if Aaron can get them.

If your lucky enough, you could bribe an aussie to send you the rear MR2 emblem (center panel "MR2") that came on MR2's there, they were gunmetal also, but the emblems were chrome. Or maybe get the part number from them to see if Aaron can get you one.

Just need the rear one to match, which I cant find

mthreat · 02-24-2008, 08:12 PM

Quote:

Originally Posted by PHOENIX

mthreat - I was able to find the part number (and have 1 in my posession) the front gunmetal 10th anniversary MR2 emblem (im not selling it). However, the rear emblem has eluded me, after several attempts with part numbers (ordering them), i have given up on the rear emblem.

When I get home, if you would like, I can post the part number for the front to see if Aaron can get them.

If your lucky enough, you could bribe an aussie to send you the rear MR2 emblem (center panel "MR2") that came on MR2's there, they were gunmetal also, but the emblems were chrome. Or maybe get the part number from them to see if Aaron can get you one.

Thanks... yeah this is why I am trying to do an "end-run" around the elusive toyota emblem for the MR2, and instead get the Supra one, which may be easier to get. The big question is, do the little prongs on the Supra emblem line up with the holes on the MR2. I'll report any findings I make...

Davis · 02-24-2008, 08:16 PM

I don't think the rear toyota emblem had prongs? or was that just the "TOYOTA" emblem...

mthreat · 02-24-2008, 08:26 PM

Quote:

Originally Posted by Davis

I don't think the rear toyota emblem had prongs? or was that just the "TOYOTA" emblem...

I don't remember.. I do know for sure that the rear trunk has one or two holes where the emblem goes. And I know that at least one of the front or rear Toyota emblems has prongs (maybe both), but I don't remember.

Davis · 02-24-2008, 08:31 PM

Oh okay, my mistake. Heh.

the blue hammer · 02-24-2008, 09:45 PM

The Toyota "T" emblem on the rear trunk does have two prongs, and curves to match curve in the trunk(I just got a new one for my 2 recently) the Toyota and the turbo/gts/gt emblems are just mounting tape. As for the front Toyota "T" emblem I can't remember if it had prongs or not(been like 4 years since I had the stock front bumper) anyway hope the other info helps.

Jaicvc · 02-24-2008, 10:10 PM

Quote:

Originally Posted by PHOENIX

mthreat - I was able to find the part number (and have 1 in my posession) the front gunmetal 10th anniversary MR2 emblem (im not selling it). However, the rear emblem has eluded me, after several attempts with part numbers (ordering them), i have given up on the rear emblem.

When I get home, if you would like, I can post the part number for the front to see if Aaron can get them.

If your lucky enough, you could bribe an aussie to send you the rear MR2 emblem (center panel "MR2") that came on MR2's there, they were gunmetal also, but the emblems were chrome. Or maybe get the part number from them to see if Aaron can get you one.

Just need the rear one to match, which I cant find

dude u got ome cam i pls see the pic...
i was searchin at google and no pics... but i seen the one on supras and they look good...

PHOENIX · 02-24-2008, 10:34 PM

Davis · 02-24-2008, 10:38 PM

I think he wants to see some pics haha.

te51levin · 02-27-2008, 03:26 PM

Quote:

Originally Posted by mthreat

It looks like the 1997 model was the "15th anniversary edition", I just did some google searching and they seem to have the darker colored emblems on the front and rear.

Strange. I can't find anything in the '97 accessory book, and the EPC shows the same emblems as all other MkIV Supras. If anyone has any JDM part numbers I'd be happy to see if I can get them.

Ben · 02-27-2008, 03:39 PM

Aaron, if you have a Sequoia accessory book by you, they tend to have the Black Pearl emblems in them. I believe they are the same size as the MR2 emblems.

PHOENIX · 02-27-2008, 06:19 PM

JDM 10th Anniversary Front Badge

75314-14010

Can you check this one too Aaron?

33504-20140-CO

I'm just curious if it works.

sinESter · 02-27-2008, 06:38 PM

did usdm 2's come with black rear toyota emblems? because on the trunk ive got a black T. no t in the front so im not sure how my car came.

te51levin · 02-27-2008, 06:40 PM

Quote:

Originally Posted by Ben

Aaron, if you have a Sequoia accessory book by you, they tend to have the Black Pearl emblems in them. I believe they are the same size as the MR2 emblems.

Boy, you're handy to have around sometimes, aren't you? I just checked the '02 accessory book and there are no emblems for the Sequoia, though they did list them for Camry, Avalon, Sienna, 4Runner, and Land Cruiser.

Quote:

Originally Posted by PHOENIX

JDM 10th Anniversary Front Badge

75314-14010

Can you check this one too Aaron?

33504-20140-CO

I'm just curious if it works.

75314-14010 is also the US part number for all MkIV Supras. It's $17.11. That other part number doesn't come up on the US system. I did try replacing the O at the end with a 0 - still no luck.

Ben · 02-27-2008, 06:43 PM

Quote:

Originally Posted by te51levin

Boy, you're handy to have around sometimes, aren't you?

Like I mentioned on the phone, if I wasn't wrenching, I was learning to be in parts

02-23-2008, 06:51 AM	#1 (permalink)
mthreat Cage Fighter Join Date: May 2007 Location: Austin, TX Posts: 269 Thanks: 28 Thanked 20 Times in 14 Posts My Google Map iTrader Rating: (7/100% )	Black pearl Toyota emblem - will the Supra one fit? Hey Aaron, I've been looking for the "smoke" or "black pearl" colored Toyota emblems for the front and rear of the MR2. I think they used this emblem on the JDM anniversary edition or something, but these may be hard to find. But I recently noticed that the USDM Supra anniversary edition also had a black pearl Toyota emblem -- can you get these, and do you know if they would fit on an MR2?

02-24-2008, 10:34 PM	#13 (permalink)
PHOENIX Beams Owners Group Join Date: Mar 2005 Location: On Hiatus....... Posts: 9,266 Thanks: 92 Thanked 292 Times in 224 Posts Blog Entries: 1 My Google Map iTrader Rating: (49/100% )	huh?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.mr2.com/forums/lithia-toyota-springfield/Toyota-MR2-26346-black-pearl-toyota-emblem-will-supra-one-fit.html
Posted By	For	Type	Date
MR2 Owners Club » Forums » General » MR2 discussion » RARE Factory Options on the MR2	This thread	Refback	01-09-2009 05:13 PM
MR2 Owners Club » Forums » General » MR2 discussion » RARE Factory Options on the MR2	This thread	Refback	01-09-2009 04:50 PM

02-23-2008, 03:47 PM	#2 (permalink)
te51levin LithiaToyotaParts.com Join Date: Oct 2005 Location: Copperhead Road Posts: 3,683 Thanks: 50 Thanked 323 Times in 267 Posts My Google Map iTrader Rating: (193/100% )	I don't know whether it would fit or not. In fact, I'm not sure whether I can get it or not, since I can't seem to find it. What year Supra got that package?

02-23-2008, 08:27 PM	#3 (permalink)
mthreat Cage Fighter Join Date: May 2007 Location: Austin, TX Posts: 269 Thanks: 28 Thanked 20 Times in 14 Posts My Google Map iTrader Rating: (7/100% )	It looks like the 1997 model was the "15th anniversary edition", I just did some google searching and they seem to have the darker colored emblems on the front and rear.

02-24-2008, 11:53 AM	#4 (permalink)
te51levin LithiaToyotaParts.com Join Date: Oct 2005 Location: Copperhead Road Posts: 3,683 Thanks: 50 Thanked 323 Times in 267 Posts My Google Map iTrader Rating: (193/100% )	That's really weird. I looked through the EPC and it showed the same emblem for all JZA Supras. I also trie the accessory book and it showed nothing. I'll take another look and see what comes up.

02-24-2008, 08:07 PM	#6 (permalink)
PHOENIX Beams Owners Group Join Date: Mar 2005 Location: On Hiatus....... Posts: 9,266 Thanks: 92 Thanked 292 Times in 224 Posts Blog Entries: 1 My Google Map iTrader Rating: (49/100% )	mthreat - I was able to find the part number (and have 1 in my posession) the front gunmetal 10th anniversary MR2 emblem (im not selling it). However, the rear emblem has eluded me, after several attempts with part numbers (ordering them), i have given up on the rear emblem. When I get home, if you would like, I can post the part number for the front to see if Aaron can get them. If your lucky enough, you could bribe an aussie to send you the rear MR2 emblem (center panel "MR2") that came on MR2's there, they were gunmetal also, but the emblems were chrome. Or maybe get the part number from them to see if Aaron can get you one. Just need the rear one to match, which I cant find

02-24-2008, 08:16 PM	#8 (permalink)
Davis Radical Dreamer Join Date: Nov 2006 Location: Long Beach, California Posts: 4,536 Thanks: 85 Thanked 125 Times in 113 Posts My Google Map iTrader Rating: (7/100% )	I don't think the rear toyota emblem had prongs? or was that just the "TOYOTA" emblem...

02-24-2008, 08:31 PM	#10 (permalink)
Davis Radical Dreamer Join Date: Nov 2006 Location: Long Beach, California Posts: 4,536 Thanks: 85 Thanked 125 Times in 113 Posts My Google Map iTrader Rating: (7/100% )	Oh okay, my mistake. Heh.

02-24-2008, 09:45 PM	#11 (permalink)
the blue hammer Nunchuk Skills Join Date: Jun 2007 Location: san diego Posts: 188 Thanks: 22 Thanked 6 Times in 6 Posts My Google Map iTrader Rating: (7/100% )	The Toyota "T" emblem on the rear trunk does have two prongs, and curves to match curve in the trunk(I just got a new one for my 2 recently) the Toyota and the turbo/gts/gt emblems are just mounting tape. As for the front Toyota "T" emblem I can't remember if it had prongs or not(been like 4 years since I had the stock front bumper) anyway hope the other info helps.

02-24-2008, 10:38 PM	#14 (permalink)
Davis Radical Dreamer Join Date: Nov 2006 Location: Long Beach, California Posts: 4,536 Thanks: 85 Thanked 125 Times in 113 Posts My Google Map iTrader Rating: (7/100% )	I think he wants to see some pics haha.

02-27-2008, 03:39 PM	#16 (permalink)
Ben Same In The End Join Date: Aug 2006 Location: Oceanside, CA / Reno, NV Posts: 4,274 Thanks: 20 Thanked 309 Times in 284 Posts My Google Map iTrader Rating: (16/100% )	Aaron, if you have a Sequoia accessory book by you, they tend to have the Black Pearl emblems in them. I believe they are the same size as the MR2 emblems.

02-27-2008, 06:19 PM	#17 (permalink)
PHOENIX Beams Owners Group Join Date: Mar 2005 Location: On Hiatus....... Posts: 9,266 Thanks: 92 Thanked 292 Times in 224 Posts Blog Entries: 1 My Google Map iTrader Rating: (49/100% )	JDM 10th Anniversary Front Badge 75314-14010 Can you check this one too Aaron? 33504-20140-CO I'm just curious if it works.

02-27-2008, 06:38 PM	#18 (permalink)
sinESter quick like a minx Join Date: Jan 2006 Location: portland Posts: 532 Thanks: 1 Thanked 2 Times in 2 Posts iTrader Rating: (1/100% )	did usdm 2's come with black rear toyota emblems? because on the trunk ive got a black T. no t in the front so im not sure how my car came.