Quote: Wiper arms

AnthraciteAngel · 04-12-2008, 09:26 PM

I think I actually only need the spring that holds them to the windshield - they're getting kinda loose and floppy. Any chance I can get a quote for both the full arm and just the spring?

I have a 91 NA.

te51levin · 04-15-2008, 10:01 PM

The spring isn't available by itself, so you'd have to get the whole arms. Bummer!

85211-17060 - $53.63 - Arm, RH
85221-17030 - $48.07 - Arm, LH

Thanks!

AnthraciteAngel · 04-16-2008, 12:36 PM

Any chance you know how to go about installing these? Is it something I can do myself?

te51levin · 04-17-2008, 05:39 PM

It's super easy. You will want to mark the position of the end of each wiper blade before you start by placing a piece of masking tape on the glass where the outer end sits (with the wipers in the down position). Open the frunk lid, then pry the little covers at the bottom end of the arms up, exposing the nuts that hold the arms to the shafts. Loosen those nuts but do not remove them all the way, then pull the wipers up off the glas and wiggle the arms until they come loose from the shafts. Once they are loose you can remove the nuts and pull the arms off entirely.

Easy stuff, just use common sense and take care not to damage the paint or glass!

tigerpee · 05-18-2008, 08:55 PM

Quote:

Originally Posted by te51levin

It's super easy. You will want to mark the position of the end of each wiper blade before you start by placing a piece of masking tape on the glass where the outer end sits (with the wipers in the down position). Open the frunk lid, then pry the little covers at the bottom end of the arms up, exposing the nuts that hold the arms to the shafts. Loosen those nuts but do not remove them all the way, then pull the wipers up off the glas and wiggle the arms until they come loose from the shafts. Once they are loose you can remove the nuts and pull the arms off entirely.

Easy stuff, just use common sense and take care not to damage the paint or glass!

The part number mentioned above would be the same for a 94NA?

te51levin · 05-20-2008, 09:29 PM

Quote:

Originally Posted by tigerpee

The part number mentioned above would be the same for a 94NA?

No. Late '93 cars got hook-style wiper arms instead of the screw-type earlier cars used. '94 arms:
85211-17061 - $53.63 - Wiper arm, RH
85221-17031 - $50.70 - Wiper arm, LH

Gairloch · 05-20-2008, 10:20 PM

Aaron, you know if the spindles are the same size so those of us with older arms could maybe update?

te51levin · 05-22-2008, 02:26 PM

From what I am seeing, the wiper linkage was basically the same throughout the entire MkII model run, so yes, they should be compatible.

sickof5sfe · 05-22-2008, 02:36 PM

I can get them from my dealership for 48$ each for Right and Left...idk bout shipping tho....aaron do those prices include shipping?...btw that price is for a 93...idk if there is any difference

te51levin · 05-22-2008, 02:40 PM

Shipping usually depends on location but I'd probably be able to use Priority Mail for about $4.90.

The prices I quote here are well below factory suggested retail. Do you work at that dealership or have a wholesale connection of some kind?

sickof5sfe · 05-22-2008, 02:45 PM

yup i work at a toyota dealership up here in MN...i get major discounts on parts...idk what shipping would be...and i doubt i could get my parts buddy to ship it directly to you..

te51levin · 05-22-2008, 02:47 PM

Wait a minute - are you trying to sell parts from your dealership in my vendor forum? If you are, please don't. This is my storefront and how I earn my paycheck. If you're not, it kind of looks like you are...

sickof5sfe · 05-22-2008, 02:51 PM

oh no i'm not..i dont work in parts...sorry if it came off that way...i was just interested to see the comparison

te51levin · 05-22-2008, 02:55 PM

Ah, I see. I would expect emplyee cost to be a little lower than MR2 club pricing. I do have to make some profit in order to keep the lights on and the rent paid.

sickof5sfe · 05-22-2008, 03:00 PM

I gotcha man...yeah i would be making no profit from this at all so anthracite buy from aaron

AnthraciteAngel · 05-27-2008, 11:54 PM

Will do. I'm actually going to pick up the arms here in the near future. Gotta get moved first - maybe next week.

04-12-2008, 09:26 PM	#1 (permalink)
AnthraciteAngel Some Skills Join Date: Mar 2008 Location: Pensacola, FL Posts: 92 Thanks: 29 Thanked 2 Times in 2 Posts iTrader Rating: (3/100% )	Quote: Wiper arms I think I actually only need the spring that holds them to the windshield - they're getting kinda loose and floppy. Any chance I can get a quote for both the full arm and just the spring? I have a 91 NA.

05-20-2008, 10:20 PM	#7 (permalink)
Gairloch Dreaming of apexes Join Date: Aug 2005 Location: Minneapolis, MN Posts: 4,848 Thanks: 125 Thanked 258 Times in 228 Posts My Google Map iTrader Rating: (7/100% )	Aaron, you know if the spindles are the same size so those of us with older arms could maybe update? __________________ "Inside the car, the world beyond the driver's immediate horizon ceases to exist. Alone with the solitude of his desire, survival sense numbed by the speed, he's outrun the mediocrity of the outside world, slipped the shackles it tries to clamp on us all. He is running free, chased only by a fear of failure, for failure is to risk ejection into the real world." ~Mark Hughes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-15-2008, 10:01 PM	#2 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,921 Thanks: 33 Thanked 146 Times in 125 Posts My Google Map iTrader Rating: (125/100% )	The spring isn't available by itself, so you'd have to get the whole arms. Bummer! 85211-17060 - $53.63 - Arm, RH 85221-17030 - $48.07 - Arm, LH Thanks!

04-16-2008, 12:36 PM	#3 (permalink)
AnthraciteAngel Some Skills Join Date: Mar 2008 Location: Pensacola, FL Posts: 92 Thanks: 29 Thanked 2 Times in 2 Posts iTrader Rating: (3/100% )	Any chance you know how to go about installing these? Is it something I can do myself?

04-17-2008, 05:39 PM	#4 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,921 Thanks: 33 Thanked 146 Times in 125 Posts My Google Map iTrader Rating: (125/100% )	It's super easy. You will want to mark the position of the end of each wiper blade before you start by placing a piece of masking tape on the glass where the outer end sits (with the wipers in the down position). Open the frunk lid, then pry the little covers at the bottom end of the arms up, exposing the nuts that hold the arms to the shafts. Loosen those nuts but do not remove them all the way, then pull the wipers up off the glas and wiggle the arms until they come loose from the shafts. Once they are loose you can remove the nuts and pull the arms off entirely. Easy stuff, just use common sense and take care not to damage the paint or glass!

05-22-2008, 02:26 PM	#8 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,921 Thanks: 33 Thanked 146 Times in 125 Posts My Google Map iTrader Rating: (125/100% )	From what I am seeing, the wiper linkage was basically the same throughout the entire MkII model run, so yes, they should be compatible.

05-22-2008, 02:36 PM	#9 (permalink)
sickof5sfe doing a secret build >:D Join Date: Jul 2007 Location: Richfield Minnesota Posts: 363 Thanks: 11 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	I can get them from my dealership for 48$ each for Right and Left...idk bout shipping tho....aaron do those prices include shipping?...btw that price is for a 93...idk if there is any difference

05-22-2008, 02:40 PM	#10 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,921 Thanks: 33 Thanked 146 Times in 125 Posts My Google Map iTrader Rating: (125/100% )	Shipping usually depends on location but I'd probably be able to use Priority Mail for about $4.90. The prices I quote here are well below factory suggested retail. Do you work at that dealership or have a wholesale connection of some kind?

05-22-2008, 02:45 PM	#11 (permalink)
sickof5sfe doing a secret build >:D Join Date: Jul 2007 Location: Richfield Minnesota Posts: 363 Thanks: 11 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	yup i work at a toyota dealership up here in MN...i get major discounts on parts...idk what shipping would be...and i doubt i could get my parts buddy to ship it directly to you..

05-22-2008, 02:47 PM	#12 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,921 Thanks: 33 Thanked 146 Times in 125 Posts My Google Map iTrader Rating: (125/100% )	Wait a minute - are you trying to sell parts from your dealership in my vendor forum? If you are, please don't. This is my storefront and how I earn my paycheck. If you're not, it kind of looks like you are...

05-22-2008, 02:51 PM	#13 (permalink)
sickof5sfe doing a secret build >:D Join Date: Jul 2007 Location: Richfield Minnesota Posts: 363 Thanks: 11 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	oh no i'm not..i dont work in parts...sorry if it came off that way...i was just interested to see the comparison

05-22-2008, 02:55 PM	#14 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,921 Thanks: 33 Thanked 146 Times in 125 Posts My Google Map iTrader Rating: (125/100% )	Ah, I see. I would expect emplyee cost to be a little lower than MR2 club pricing. I do have to make some profit in order to keep the lights on and the rent paid.

05-22-2008, 03:00 PM	#15 (permalink)
sickof5sfe doing a secret build >:D Join Date: Jul 2007 Location: Richfield Minnesota Posts: 363 Thanks: 11 Thanked 4 Times in 4 Posts iTrader Rating: (1/100% )	I gotcha man...yeah i would be making no profit from this at all so anthracite buy from aaron

05-27-2008, 11:54 PM	#16 (permalink)
AnthraciteAngel Some Skills Join Date: Mar 2008 Location: Pensacola, FL Posts: 92 Thanks: 29 Thanked 2 Times in 2 Posts iTrader Rating: (3/100% )	Will do. I'm actually going to pick up the arms here in the near future. Gotta get moved first - maybe next week.