What parts do I need?

BRoman · 07-01-2008, 02:55 PM

Hey Aaron,

The speedo subassembly on the trans of my 89 SC needs replacing...and the replacement adapter (elbow) from the local Toyota dealer is not the same size as the old one!

The old adapter fits easily in both the new sleeve and the old sleeve...the new adapter is just a little too big for both. This is as far as it goes without serious pressure: http://i294.photobucket.com/albums/m...rOldSleeve.jpg

The sleeve is PN 33404-17010; adapter is PN 83770-17010. Should I be using other part number(s)? And if so, do you sell it?

Thanks in advance for any parts or info you can provide. You helped me out with some TRD filters a few years ago but I've been out of the hobby for awhile.

-Bryce

te51levin · 07-03-2008, 07:33 PM

83770-17010 and 33404-17010 are both correct for an SC with manual tranny. The parts you got may have been misbagged (had the wrong part number on the bag) - I've seen that before. It might not hurt to make sure both mating surfaces are clean (no burrs) and maybe lube them with a little clean motor oil before you condemn them. Sometimes it doesn't take much to hang things up.

07-01-2008, 02:55 PM	#1 (permalink)
BRoman walking amok Join Date: Jun 2008 Location: TX Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	What parts do I need? Hey Aaron, The speedo subassembly on the trans of my 89 SC needs replacing...and the replacement adapter (elbow) from the local Toyota dealer is not the same size as the old one! The old adapter fits easily in both the new sleeve and the old sleeve...the new adapter is just a little too big for both. This is as far as it goes without serious pressure: http://i294.photobucket.com/albums/m...rOldSleeve.jpg The sleeve is PN 33404-17010; adapter is PN 83770-17010. Should I be using other part number(s)? And if so, do you sell it? Thanks in advance for any parts or info you can provide. You helped me out with some TRD filters a few years ago but I've been out of the hobby for awhile. -Bryce

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-03-2008, 07:33 PM	#2 (permalink)
te51levin LithiaToyotaParts.com Join Date: Oct 2005 Location: Copperhead Road Posts: 3,706 Thanks: 50 Thanked 324 Times in 268 Posts My Google Map iTrader Rating: (193/100% )	83770-17010 and 33404-17010 are both correct for an SC with manual tranny. The parts you got may have been misbagged (had the wrong part number on the bag) - I've seen that before. It might not hurt to make sure both mating surfaces are clean (no burrs) and maybe lube them with a little clean motor oil before you condemn them. Sometimes it doesn't take much to hang things up.