Rear Suspension Lower brace

impr3zd · 02-09-2009, 03:06 PM

This rusted out on me. I took the part to our local toyoat and he quoted me a price. I hope it is the right piece. It goes from the passenger fram under the AC/Alt and attaches toward the middle of the car. Looked like between the radiator lines. It is 1 inch in daimeter and about 14 inches long. Here is link to some pictures on my FB Bryan Davenport's Photos | Facebook

How much shipped to 64034?

impr3zd · 02-11-2009, 02:29 PM

i think the part number is RH 53653

Shipped to 64034

te51levin · 02-11-2009, 06:00 PM

Frankly, I am kind of surprised that your local dealer could even find the part. They are pretty difficult to locate in the EPC! Just so you can confirm, they're highlighted in the attached screenshot.

It looks like you only need the right side piece, but I'll list right and left just in case. Shipping would be the same for one or two pieces.

53653-17020 - Brace, rear suspension, RH
53654-17010 - Brace, rear suspension, LH

Update 08/02/11: You can now check prices or place your order at LithiaToyotaParts.com - check this thread for more info on how to use our website:SEARCH FIRST! Check out the new LithiaToyotaParts.com!

impr3zd · 03-06-2009, 10:11 AM

ordered today

rousegk7 · 03-06-2009, 12:44 PM

Hey Aaron, do you know what size the bolts are that hold the braces on?
EPC lists the bolt as 90119-10647

te51levin · 03-09-2009, 01:27 PM

Quote:

Originally Posted by impr3zd

ordered today

Shipping out today. Thank you sir!

Quote:

Originally Posted by rousegk7

Hey Aaron, do you know what size the bolts are that hold the braces on?

I do not, but by the size of the hole in the end of the brace, I'm guessing it's 10x1.25 thread. If they have a 14mm head, I'd bet lunch on it.

PearlJammzz · 03-09-2009, 03:58 PM

I wish I read this before I just went and sprayed PB blaster on my exhaust mani...I would of liked to prove you wrong so I got a free lunch, haha. It prob. is a 14 though, I'm almost certain.

wolfiekun · 08-01-2011, 10:42 PM

Quote:

Originally Posted by te51levin

Frankly, I am kind of surprised that your local dealer could even find the part. They are pretty difficult to locate in the EPC! Just so you can confirm, they're highlighted in the attached screenshot.

It looks like you only need the right side piece, but I'll list right and left just in case. Shipping would be the same for one or two pieces.

53653-17020 - Brace, rear suspension, RH
53654-17010 - Brace, rear suspension, LH

Hey, Brand New Mr2 Owner of a few weeks. I finally got underneath the car, and it turns out the left brace is completely rusted through, and I cant seem to locate the right one. (Probably because there is a plastic cover under the car) Anyway, I am wondering how I could get a hold of the left one, should I replace the right one just in case, and how necessary of a part is this?

te51levin · 08-02-2011, 01:24 PM

Quote:

Originally Posted by wolfiekun

Hey, Brand New Mr2 Owner of a few weeks.

Great! Welcome to the board!

Quote:

Originally Posted by wolfiekun

I finally got underneath the car, and it turns out the left brace is completely rusted through, and I cant seem to locate the right one. (Probably because there is a plastic cover under the car) Anyway, I am wondering how I could get a hold of the left one...

That's really easy! Please read this thread carefully:
SEARCH FIRST! Check out the new LithiaToyotaParts.com!

Quote:

Originally Posted by wolfiekun

should I replace the right one just in case, and how necessary of a part is this?

Take a look at it before you replace it, but I bet it's going to be rotten as a peach! Toyota's not in the habit of paying for parts that don't make the car better, and given the fact that these do nothing for the looks of the car, I'd say there is a reason for their presence. You probably want to have them in place.

wolfiekun · 08-02-2011, 01:55 PM

Quote:

Originally Posted by te51levin

Take a look at it before you replace it, but I bet it's going to be rotten as a peach! Toyota's not in the habit of paying for parts that don't make the car better, and given the fact that these do nothing for the looks of the car, I'd say there is a reason for their presence. You probably want to have them in place.

Rotten as a peach? Id rather eat the peach. There is a rust gap on about 1/3 of the way from the midmost mount, meaning it is not connected. its only sitting there looking pretty.... Minus the pretty. Thats why I was wondering about the importance XD i've been driving on it for a few weeks, and didnt even know until recently. Btw, thank you, I ordered a set of them today.

te51levin · 08-02-2011, 01:59 PM

Excellent, thank you. We will get them out as soon as we can. Should be able to ship today!

02-09-2009, 03:06 PM	#1 (permalink)
impr3zd No Skills Join Date: Jan 2009 Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	Rear Suspension Lower brace This rusted out on me. I took the part to our local toyoat and he quoted me a price. I hope it is the right piece. It goes from the passenger fram under the AC/Alt and attaches toward the middle of the car. Looked like between the radiator lines. It is 1 inch in daimeter and about 14 inches long. Here is link to some pictures on my FB Bryan Davenport's Photos \| Facebook How much shipped to 64034?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-11-2009, 02:29 PM	#2 (permalink)
impr3zd No Skills Join Date: Jan 2009 Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	i think the part number is RH 53653 Shipped to 64034

03-06-2009, 10:11 AM	#4 (permalink)
impr3zd No Skills Join Date: Jan 2009 Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (1/100% )	ordered today

03-06-2009, 12:44 PM	#5 (permalink)
rousegk7 Cage Fighter Join Date: Mar 2007 Posts: 392 Thanks: 19 Thanked 11 Times in 10 Posts iTrader Rating: (8/100% )	Hey Aaron, do you know what size the bolts are that hold the braces on? EPC lists the bolt as 90119-10647

03-09-2009, 03:58 PM	#7 (permalink)
PearlJammzz Cage Fighter Join Date: Feb 2006 Posts: 2,115 Thanks: 9 Thanked 74 Times in 69 Posts My Google Map iTrader Rating: (7/100% )	I wish I read this before I just went and sprayed PB blaster on my exhaust mani...I would of liked to prove you wrong so I got a free lunch, haha. It prob. is a 14 though, I'm almost certain.

08-02-2011, 01:59 PM	#11 (permalink)
te51levin LithiaToyotaParts.com Join Date: Oct 2005 Location: Copperhead Road Posts: 3,683 Thanks: 50 Thanked 323 Times in 267 Posts My Google Map iTrader Rating: (193/100% )	Excellent, thank you. We will get them out as soon as we can. Should be able to ship today!