tundra studs?

streetrack 3vz ht · 07-01-2009, 06:10 AM

i think mr2 studs are 12 x 1.5 and close to 40mm

the is300 studs which are 65mm long are available in arp...pretty long
and pricey

i heard you can use tundra studs which are 5mm longer then mr2 studs ..

its time for a set for me as one already broke

how much for these tundra studs

thanks
jeff

te51levin · 07-02-2009, 01:45 PM

Hello Jeff! Thanks for the call. The MR2 studs (90942-02049, $2.82 each) are about 45mm overall, and roughly 40mm from the back side of the hub flange to the end of the stud. I don't have Tundra studs (90942-02052, $4.69 each) here to measure. The IS300 studs (90942-02070, $1.87 each) may be worth trying. Toyota does not provide dimensions on hardware so we'd have to see if they are useful or not. If you don't find any reference material on it I can order one in and just compare it in person.

streetrack 3vz ht · 07-02-2009, 02:57 PM

thanks dude!

im trying to find the length on the is300 studs.. i saw something listed for 40mm. im going to look for more info then will get back to you..might be a lil short

again let me look around a little more and i will hit this board back

07-01-2009, 06:10 AM	#1 (permalink)
streetrack 3vz ht retired from e stock 3/09 Join Date: Apr 2009 Location: los angeles Posts: 85 Thanks: 0 Thanked 2 Times in 2 Posts iTrader Rating: (2/100% )	tundra studs? i think mr2 studs are 12 x 1.5 and close to 40mm the is300 studs which are 65mm long are available in arp...pretty long and pricey i heard you can use tundra studs which are 5mm longer then mr2 studs .. its time for a set for me as one already broke how much for these tundra studs thanks jeff

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-02-2009, 01:45 PM	#2 (permalink)
te51levin Lithia Toyota Parts Join Date: Oct 2005 Location: Oregon Posts: 1,885 Thanks: 33 Thanked 144 Times in 123 Posts My Google Map iTrader Rating: (124/100% )	Hello Jeff! Thanks for the call. The MR2 studs (90942-02049, $2.82 each) are about 45mm overall, and roughly 40mm from the back side of the hub flange to the end of the stud. I don't have Tundra studs (90942-02052, $4.69 each) here to measure. The IS300 studs (90942-02070, $1.87 each) may be worth trying. Toyota does not provide dimensions on hardware so we'd have to see if they are useful or not. If you don't find any reference material on it I can order one in and just compare it in person.

07-02-2009, 02:57 PM	#3 (permalink)
streetrack 3vz ht retired from e stock 3/09 Join Date: Apr 2009 Location: los angeles Posts: 85 Thanks: 0 Thanked 2 Times in 2 Posts iTrader Rating: (2/100% )	thanks dude! im trying to find the length on the is300 studs.. i saw something listed for 40mm. im going to look for more info then will get back to you..might be a lil short again let me look around a little more and i will hit this board back